hardware problem

[Marlon Corleone]

hi guys, i have problem installing FreeBSD
4.8-RELEASE, though i get thesame problem from my
previous CD 4.7-RELEASE also, meaning this is a
hardware problem, when i try to boot the installation
CD. i get this following message:

plip0: <PLIP network interface > on ppbus0
ad0: READ command timeout tag=0 serv=0 -resetting
ata0: resetting devices...

my system specs are the following:
 
Processor(s)
Model : Intel(R) Pentium(R) 4 CPU 2.00GHz
Speed : 2.00GHz

HDD: seagate 80 7200 RPM gig ata 100
256 MB PC 333 DDR

System BIOS : Award Software, Inc. ASUS P4S533-E ACPI
BIOS Revision 1008 Beta 002
System Mainboard : ASUSTeK Computer INC. P4S533-E
System Chipset : ASUSTeK Computer Inc SiS645DX CPU to
PCI Bridge
Front Side Bus Speed : 4x 100MHz (400MHz data rate

Video System
Monitor/Panel : Aspire 55s
Adapter : NVIDIA GeForce2 MX/MX 400 (Microsoft
Corporation)

Physical Storage Devices
Removable Drive : Floppy disk drive
Disk Drive : ST380021A (74.5GB)
CD-ROM/DVD : SONY CD-RW  CRX175A (CD 40X Rd, 24X Wr)
CD-ROM/DVD : SONY DVD-ROM DDU1621 (CD 40X Rd) (DVD 5X
Rd)
CD-ROM/DVD : FS_SCSI7 FS_CDAWDM_2000CD SCSI CdRom
Device (CD 50X Rd)

 my mobo supports ata 133, and i checked the hardware
support in Freebsd.org, and it supports my ata 133 and
my sis 645 chipset
 i have an old cpu celeron 366 which works with
FreeBSD, but i need my p4s 533-E also to work, cause
my 366 is very slow in terms of compiling the kernel.

my friends motherboard p4s533 works well
in FreeBSD. just my motherboard has labeled p4s533-E,
the olnly difference is: p4s533 only supports ata 100
p4s533-E supports ata 133 

is this because of the ata 133 thing? hope you guys
reply thanks :)

__________________________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com