please help translate smartctl output to human language

[Wojciech Puchar]

i am interested how much write-wear does my samsung SSD experienced 
relative to maximum allowed.

on my 500GB samsung SSD smartctl says

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED 
WHEN_FAILED RAW_VALUE
   5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always 
-       0
   9 Power_On_Hours          0x0032   093   093   000    Old_age   Always 
-       31126
  12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always 
-       59
177 Wear_Leveling_Count     0x0013   095   095   000    Pre-fail  Always 
-       88
179 Used_Rsvd_Blk_Cnt_Tot   0x0013   100   100   010    Pre-fail  Always 
-       0
181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always 
-       0
182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always 
-       0
183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always 
-       0
187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always 
-       0
190 Airflow_Temperature_Cel 0x0032   073   051   000    Old_age   Always 
-       27
195 ECC_Error_Rate          0x001a   200   200   000    Old_age   Always 
-       0
199 CRC_Error_Count         0x003e   100   100   000    Old_age   Always 
-       0
235 POR_Recovery_Count      0x0012   099   099   000    Old_age   Always 
-       28
241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always 
-       115175140988




All seems fine but i'm not sure if i correctly understand VALUE, WORST, 
THRESH data for Total_LBAs_Written

50TB was written, so it's 100 times capacity. taking some write 
amplification in account (i use geli so no in drive compression have 
effect) it would be probably like 150-200.

Value is 99. It was 100 when i bought it.

Does it mean that in is 1% worn and can take 100 times more writes until 
it fails? or i am too optimistic?