est on newer CPU
Milan Obuch
freebsd-hackers at dino.sk
Wed Feb 20 10:26:34 UTC 2019
On Tue, 19 Feb 2019 12:44:57 -0800
Ben Widawsky <bwidawsk at freebsd.org> wrote:
> On 19-02-18 18:01:19, Milan Obuch wrote:
> > Hi,
> >
> > I have currently installed FreeBSD on HP gen10 server. With an
> > exception of HP RAID controller, needs to be switched to SATA mode,
> > everything went well (OK, I did some errors so it was a bit of
> > trials-errors but basically no problem).
> >
> > Now I found there is not working powerd - in dmesg
> >
> > est: CPU supports Enhanced Speedstep, but is not recognized.
> > est: cpu_vendor GenuineIntel, msr 20b600002500
> > device_attach: est0 attach returned 6
> >
> > CPU is
> >
> > CPU: Intel(R) Pentium(R) Gold G5400 CPU @ 3.70GHz (3696.18-MHz
> > K8-class CPU)
> >
> > Actual system version is
> >
> > 12.0-STABLE FreeBSD 12.0-STABLE r344230
> >
> > Is there something I can do to get est recognize this CPU and get
> > working powerd?
> >
> > Regards,
> > Milan
>
> To start with, can you try
> hw.est.msr_info=1
>
Well, I tried and put this line into /boot/loader.conf, but the result
was endless boot loop. No idea what is wrong... it just quickly loops,
most probably inserted line is causing system reset.
> Also, is acpi_perf being loaded?
>
No, there is no such file in /boot/kernel at all.
Also, I tried 13-CURRENT last snapshot, it boot OK, but the net result
is the same - est could not attach, because CPU is not recognized.
On another system, with different Intel CPU, it works.
Milan
More information about the freebsd-hackers
mailing list