lacp weirdness on 10.3-STABLE

[Slawa Olhovchenkov]

On Fri, Oct 28, 2016 at 05:14:37PM -0400, Mark Saad wrote:

> Hi everyone
>  I wast sure where to start on this one. So let me jump in here.
> I have a box with a dual port solarflare card. Both ports were running in
> lacp
> lagg for a while with out any issues. I took the box down free up some
> space in the rack. I reciently
> booted it back up; using the original network ports and cables from the
> original seutp. However I can not bring up the lagg in lacp mode. Trussing
> the process is showing this
> 
> n01:~ # ifconfig lagg0 up lacp
> ifconfig: lacp: bad value


ifconfig lagg0 up laggproto lacp

> n01:~ # truss ifconfig lagg0 up lacp
> .....
> read(4,"# $FreeBSD: stable/10/etc/networ"...,4096) = 368 (0x170)
> read(4,0x801c47000,4096)                         = 0 (0x0)
> close(4)                                         = 0 (0x0)
> ifconfig: write(2,"ifconfig: ",10)                       = 10 (0xa)
> lacp: bad valuewrite(2,"lacp: bad value",15)                     = 15 (0xf)
> ....
> 
> I am at a loss. The Switch ports are in the original configs as well.
> Anyone have any ideas ?
> Kernel and Userland are  FreeBSD 10.3-STABLE #0: Tue Aug 23 14:48:27 EDT
> 2016
> 
> 
> -- 
> mark saad | nonesuch at longcount.org
> _______________________________________________
> freebsd-hackers at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-hackers
> To unsubscribe, send any mail to "freebsd-hackers-unsubscribe at freebsd.org"