SATA set features failed

[Steven Hartland]

I believe 0x10 and 0x50 correspond to CTS_SATA_CAPS_H_AN (Async 
notification)

The following should help identify what the device is advertising:
camcontrol identify ada0

     Regards
     Steve

On 02/03/2015 20:31, Wojciech Puchar wrote:
> this shows on booting on my new crucial M100 SSD in lenovo B590
>
> (aprobe0:ahcich0:0:0:0): SETFEATURES ENABLE SATA FEATURE. ACB: ef 10 
> 00 00 00 40 00 00 00 00 05 00
> (aprobe0:ahcich0:0:0:0): CAM status: ATA Status Error
> (aprobe0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 
> (ABRT )
> (aprobe0:ahcich0:0:0:0): RES: 51 04 00 00 00 40 00 00 00 05 00
> (aprobe0:ahcich0:0:0:0): Retrying command
> (aprobe0:ahcich0:0:0:0): SETFEATURES ENABLE SATA FEATURE. ACB: ef 10 
> 00 00 00 40 00 00 00 00 05 00
> (aprobe0:ahcich0:0:0:0): CAM status: ATA Status Error
> (aprobe0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 
> (ABRT )
> (aprobe0:ahcich0:0:0:0): RES: 51 04 00 00 00 40 00 00 00 05 00
> (aprobe0:ahcich0:0:0:0): Error 5, Retries exhausted
> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
> ada0: <Crucial CT128MX100SSD1 MU01> ATA-9 SATA 3.x device
> ada0: Serial Number 14450DBF9558
> ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
> ada0: Command Queueing enabled
> ada0: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C)
> ada0: Previously was known as ad0
> ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
> ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
> ses0: SEMB SES Device
>
> what does it means? what feature cannot be enabled?
>
> otherwise - SSD works fine.
> _______________________________________________
> freebsd-hackers at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
> To unsubscribe, send any mail to 
> "freebsd-hackers-unsubscribe at freebsd.org"