Pxeboot stops

[amine tay]

already did that, but no changes.
It seams like the console it's not the source of the problem !
Normally the pxeboot should try to load the kernel using NFS, I checked and
all my services are working fine.
It's a little bit hard because there is no logs to see what's the problem !


2014-03-31 18:36 GMT+02:00 <dteske at freebsd.org>:

>
>
> > -----Original Message-----
> > From: Sean Bruno [mailto:sbruno at ignoranthack.me]
> > Sent: Monday, March 31, 2014 5:56 AM
> > To: amine tay
> > Cc: freebsd-hackers at freebsd.org
> > Subject: Re: Pxeboot stops
> >
> > On Mon, 2014-03-31 at 14:08 +0200, amine tay wrote:
> > > Hi every one,
> > > When i'm trying to pxe boot FreeBSD 9.1, the pxeboot display the lines
> > bellow :
> > > Building the boot loader arguments
> > > Looking up /BOOT/LOADER... Found
> > > Relocating the loader and the BTX
> > > Starting the BTX loader
> > >
> > > BTX loader 1.00 BTX version is 1.02
> > > Consoles: internal video/keyboard
> > > BIOS CD is cd0
> > > BIOS drive C: is disk0
> > > BIOS drive D: is disk1
> > > BIOS 636kB/261056kB available memory
> > >
> > > FreeBSD/i386 bootstrap loader, Revision 1.1
> > >
> > > But it stops here and I'm not getting the :
> > >
> > > pxe open  : server addr
> > >
> > > or
> > > Loading /boot/defaults/loader.conf
> > > /boot/kernel/kernel text=0x64daa0 data=0xa4e80+0xa9e40
> > > syms=[0x4+0x6cac0+0x4+0x88e9d] \
> >
> > It looks like its switching consoles on you.  Is this the video or serial
> console
> > you have captured from?
> >
> > If its the serial console, then I suspect you need to setup the
> loader.conf with
> > a comconsole entry.
> >
>
> E.g., console="vidconsole,comconsole"
>
> NB: Enables both video and serial instead of one or the other.
> --
> Devin
>
> _____________
> The information contained in this message is proprietary and/or
> confidential. If you are not the intended recipient, please: (i) delete the
> message and all copies; (ii) do not disclose, distribute or use the message
> in any manner; and (iii) notify the sender immediately. In addition, please
> be aware that any message addressed to our domain is subject to archiving
> and review by persons other than the intended recipient. Thank you.
>