Filesystem full when installing custom kernel in FreeBSD

Mon Oct 18 22:53:34 UTC 2010

Hi,

I just got succeeded with my compilation of a custom kernel for
FreeBSD 8.1. But when I'm trying to install it, I got an error.
File system is full!

So I moved the old kernel to another partition, but got the same
error. And I cannot move it back again.
Whats wrong? How can I do to get a kernel again?

Thanks.
Best regards, Jack Engvist Johansson

 bsd# make installkernel KERNCONF=NECTRUS
--------------------------------------------------------------
>>> Installing kernel
--------------------------------------------------------------
cd /usr/obj/usr/src/sys/NECTRUS;  MAKEOBJDIRPREFIX=/usr/obj
MACHINE_ARCH=amd64  MACHINE=amd64  CPUTYPE=
GROFF_BIN_PATH=/usr/obj/usr/src/tmp/legacy/usr/bin
GROFF_FONT_PATH=/usr/obj/usr/src/tmp/legacy/usr/share/groff_font
GROFF_TMAC_PATH=/usr/obj/usr/src/tmp/legacy/usr/share/tmac
PATH=/usr/obj/usr/src/tmp/legacy/usr/sbin:/usr/obj/usr/src/tmp/legacy/usr/bin:/usr/obj/usr/src/tmp/legacy/usr/games:/usr/obj/usr/src/tmp/usr/sbin:/usr/obj/usr/src/tmp/usr/bin:/usr/obj/usr/src/tmp/usr/games:/sbin:/bin:/usr/sbin:/usr/bin
 make KERNEL=kernel install
thiskernel=`sysctl -n kern.bootfile` ;  if [ ! "`dirname
"$thiskernel"`" -ef /boot/kernel ] ; then  chflags -R noschg
/boot/kernel ;  rm -rf /boot/kernel ;  else  if [ -d /boot/kernel.old
] ; then  chflags -R noschg /boot/kernel.old ;  rm -rf
/boot/kernel.old ;  fi ;  mv /boot/kernel /boot/kernel.old ;  sysctl
kern.bootfile=/boot/kernel.old/"`basename "$thiskernel"`" ;  fi
mkdir -p /boot/kernel
install -p -m 555 -o root -g wheel kernel /boot/kernel

/: write failed, filesystem is full
install: /boot/kernel/kernel: No space left on device
*** Error code 71

Stop in /usr/obj/usr/src/sys/NECTRUS.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.
-----------------------------------------------------------------------------------------

Laptop spec:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c01302377&dlc=en

/var/run/dmesg.boot:

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE #0: Mon Jul 19 02:36:49 UTC 2010
    root at mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-60 (1994.64-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x60f82  Family = f  Model = 68  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
real memory  = 2147483648 (2048 MB)
avail memory = 1976483840 (1884 MB)
ACPI APIC Table: <HP          APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pci3: <network> at device 0.0 (no driver attached)
vgapci0: <VGA-compatible display> mem
0xc2000000-0xc2ffffff,0xd0000000-0xdfffffff,0xc1000000-0xc1ffffff irq
18 at device 5.0 on pci0
nvidia0: <GeForce Go 6150> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [ITHREAD]
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
pci0: <processor> at device 10.3 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xc0004000-0xc0004fff irq
20 at device 11.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc0005000-0xc00050ff
irq 22 at device 11.1 on pci0
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
atapci0: <nVidia nForce MCP51 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3080-0x308f at device 13.0 on
pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP51 SATA300 controller> port
0x30b0-0x30b7,0x30a4-0x30a7,0x30a8-0x30af,0x30a0-0x30a3,0x3090-0x309f
mem 0xc0006000-0xc0006fff irq 21 at device 14.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci7: <ACPI PCI bus> on pcib3
pci0: <multimedia, HDA> at device 16.1 (no driver attached)
nfe0: <NVIDIA nForce 430 MCP13 Networking Adapter> port 0x30b8-0x30bf
mem 0xc0007000-0xc0007fff irq 16 at device 20.0 on pci0
miibus0: <MII bus> on nfe0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
nfe0: Ethernet address: 00:1e:68:30:00:dd
nfe0: [FILTER]
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROM> at iomem 0xcf800-0xd0fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
powernow0: <PowerNow! K8> on cpu0
powernow1: <PowerNow! K8> on cpu1
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
acd0: DVDR <Slimtype DVD A DS8A1H/WH66> at ata0-master PIO4
ad4: 152627MB <Hitachi HTS542516K9SA00 BBCOC32P> at ata2-master
UDMA100 SATA 1.5Gb/s
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus1 usbus0
uhub0: 8 ports with 8 removable, self powered
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
uhub1: 8 ports with 8 removable, self powered
ugen1.2: <vendor 0x04b4> at usbus1
uhub2: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/90.15, addr
2> on usbus1
Root mount waiting for: usbus1
uhub2: 4 ports with 4 removable, self powered
Root mount waiting for: usbus1
ugen1.3: <SuYin> at usbus1
ugen1.4: <vendor 0x08ff> at usbus1
Root mount waiting for: usbus1
ugen1.5: <Tablet> at usbus1
ums0: <Tablet ISD-V4, class 0/0, rev 1.10/2.54, addr 5> on usbus1
ums0: 2 buttons and [XY] coordinates ID=1
uhid0: <Tablet ISD-V4, class 0/0, rev 1.10/2.54, addr 5> on usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
ugen0.2: <Broadcom Corp> at usbus0
ugen1.6: <Apple, Inc.> at usbus1
uhub3: <Apple, Inc. Keyboard Hub, class 9/0, rev 2.00/96.15, addr 6> on usbus1
uhub3: 3 ports with 2 removable, bus powered
Root mount waiting for: usbus1
ugen1.7: <Logitech> at usbus1
ums1: <Logitech USB Laser Mouse, class 0/0, rev 2.00/31.00, addr 7> on usbus1
ums1: 8 buttons and [XYZT] coordinates ID=0
ugen1.8: <Apple, Inc> at usbus1
ukbd0: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.69, addr 8> on usbus1
kbd2 at ukbd0
uhid1: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.69, addr 8> on usbus1
Trying to mount root from ufs:/dev/ad4s1a
------------------------------------------------------------------------------------------