boot loader

[Doug Barton]

FYI, for future reference this question is really more appropriate for 
freebsd-questions at freebsd.org.

On Fri, 26 Oct 2007, Thomas Ching wrote:

> Hi, I am trying to do the following with existing systems running 4.5.
> I'd really appreciate if anyone has any hints, pointers, opinions, or
> even just "you should talk to this other group" for me.
>
> 1.	Existing system: FreeBSD 4.5 based with FreeBSD boot loader
> (boot0) in MBR

You're not planning to dual-boot anything, right? Just boot and run one 
operating system?

> 2.	I am trying to install a new software based on either FreeBSD
> 6.2 or later, or LINUX with the following restrictions:
>
> 	a.	No console access
> 	b.	No media access other than serial port, Ethernet,
> existing HD with 4.5 installed (i.e. NO CD/DVD, floppy, USB....etc)
>
> 3.	The hard drive (1) has enough empty space (currently not
> partitioned/used) so I can create a new slice to put the new OS/software
> in and boot from the new OS, but I am not sure how I can achieve that.

You definitely can't use any of the standard installation methods without 
console access. You also can't dual boot without console access.

> 1.	Is it possible for me to boot of FreeBSD 4.5 and "run an
> installation over Ethernet/ftp"?

No.

> 2.	Is it possible for me to "tar up a FreeBSD 6.2" partition, put
> onto the 4.5 disk (new partition) then "sysinstall" (or something like
> that) to make the system boot from the new partition?

You could theoretically install onto a local system, tar it up, then 
unpack it in the unused partition on your remote machine, yes. However in 
order to set the new slice bootable you'd have to then use the disk 
editor, and if you get even one thing the tiniest bit wrong, you've 
bricked it.

If I were in your position I'd do this with make world, but that's going 
to take a looooooooong time because you'll first have to update to the 
latest RELENG_4, then 5-stable, then 6-stable (at least) and then if you 
don't want to have to do this again for a while I'd update to 7.0 when it 
is released.

The other alternative is to bribe someone who is local to do the 
installation for you, which all things considered would probably be easier 
all around.

hope this helps,

Doug

-- 

     This .signature sanitized for your protection