Fwd: py27-gobject-3.8.0 failed on amd64 8
Martin Wilke
miwi at freebsd.org
Fri May 10 06:53:37 UTC 2013
Begin forwarded message:
> From: Portbuild user <portbuild at FreeBSD.org>
> Subject: py27-gobject-3.8.0 failed on amd64 8
> Date: May 10, 2013 1:47:22 PM GMT+08:00
> To: miwi at freebsd.org, itetcu at FreeBSD.org
>
> You can also find this build log at
>
> http://pointyhat.freebsd.org/errorlogs/amd64-errorlogs/a.8.20130510010703.pointyhat/py27-gobject-3.8.0.log
>
> building py27-gobject-3.8.0 on beefy1.isc.freebsd.org
> in directory /a/pkgbuild/8/20130510010703.pointyhat/chroot/40433
> building for: 8.3-RELEASE-p8 amd64
> maintained by: gnome at FreeBSD.org
> port directory: /usr/ports/devel/py-gobject3
> Makefile ident: $FreeBSD: head/devel/py-gobject3/Makefile 316333 2013-04-23 10:13:19Z bapt $
> build started at Fri May 10 05:42:45 UTC 2013
> FETCH_DEPENDS=
> PATCH_DEPENDS=
> EXTRACT_DEPENDS=
> BUILD_DEPENDS=cairo-1.10.2_5,2.tbz expat-2.0.1_2.tbz fontconfig-2.9.0,1.tbz freetype2-2.4.11.tbz gamin-0.1.10_5.tbz gettext-0.18.1.1_1.tbz gio-fam-backend-2.34.3.tbz glib-2.34.3.tbz gmake-3.82_1.tbz gnomehier-3.0.tbz gobject-introspection-1.34.2.tbz kbproto-1.0.5.tbz libX11-1.4.4,1.tbz libXau-1.0.6.tbz libXdmcp-1.1.0.tbz libXrender-0.9.6.tbz libffi-3.0.13.tbz libiconv-1.14_1.tbz libpthread-stubs-0.3_3.tbz libxcb-1.7.tbz pcre-8.32.tbz perl-5.14.2_3.tbz pixman-0.24.2.tbz pkgconf-0.9.2_1.tbz png-1.5.15.tbz py27-cairo-1.8.10_1.tbz python27-2.7.3_6.tbz renderproto-0.11.1.tbz xcb-util-0.3.9_1,1.tbz xcb-util-renderutil-0.3.8.tbz xproto-7.0.22.tbz
> RUN_DEPENDS=cairo-1.10.2_5,2.tbz expat-2.0.1_2.tbz fontconfig-2.9.0,1.tbz freetype2-2.4.11.tbz gamin-0.1.10_5.tbz gettext-0.18.1.1_1.tbz gio-fam-backend-2.34.3.tbz glib-2.34.3.tbz gnomehier-3.0.tbz gobject-introspection-1.34.2.tbz kbproto-1.0.5.tbz libX11-1.4.4,1.tbz libXau-1.0.6.tbz libXdmcp-1.1.0.tbz libXrender-0.9.6.tbz libffi-3.0.13.tbz libiconv-1.14_1.tbz libpthread-stubs-0.3_3.tbz libxcb-1.7.tbz pcre-8.32.tbz perl-5.14.2_3.tbz pixman-0.24.2.tbz pkgconf-0.9.2_1.tbz png-1.5.15.tbz py27-cairo-1.8.10_1.tbz python27-2.7.3_6.tbz renderproto-0.11.1.tbz xcb-util-0.3.9_1,1.tbz xcb-util-renderutil-0.3.8.tbz xproto-7.0.22.tbz
> PKG_DEPENDS=
> prefixes: LOCALBASE=usr/local
> add_pkg
> add_pkg
> ================================================================
> ====================<phase 1: make checksum>====================
> ===> License LGPL21 accepted by the user
> => pygobject-3.8.0.tar.xz doesn't seem to exist in /tmp/distfiles/gnome3.
> => Attempting to fetch ftp://ftp-master.freebsd.org/pub/FreeBSD/ports/distfiles/gnome3/pygobject-3.8.0.tar.xz
> fetch: ftp://ftp-master.freebsd.org/pub/FreeBSD/ports/distfiles/gnome3/pygobject-3.8.0.tar.xz: File unavailable (e.g., file not found, no access)
> => Attempting to fetch ftp://pointyhat.FreeBSD.org/pub/FreeBSD/distfiles/gnome3/pygobject-3.8.0.tar.xz
> fetch: ftp://pointyhat.FreeBSD.org/pub/FreeBSD/distfiles/gnome3/pygobject-3.8.0.tar.xz: No route to host
> => Attempting to fetch ftp://ftp.belnet.be/mirror/ftp.gnome.org/sources/pygobject/3.8/pygobject-3.8.0.tar.xz
> pygobject-3.8.0.tar.xz 637 kB 251 kBps
> ===> Fetching all distfiles required by py27-gobject-3.8.0 for building
> => SHA256 Checksum OK for gnome3/pygobject-3.8.0.tar.xz.
> ================================================================
> ====================<phase 2: make extract>====================
> add_pkg
> ===> License LGPL21 accepted by the user
> ===> Fetching all distfiles required by py27-gobject-3.8.0 for building
> ===> Extracting for py27-gobject-3.8.0
> => SHA256 Checksum OK for gnome3/pygobject-3.8.0.tar.xz.
> ================================================================
> ====================<phase 3: make patch>====================
> add_pkg
> ===> Patching for py27-gobject-3.8.0
> ================================================================
> ====================<phase 4: make build>====================
> add_pkg cairo-1.10.2_5,2.tbz expat-2.0.1_2.tbz fontconfig-2.9.0,1.tbz freetype2-2.4.11.tbz gamin-0.1.10_5.tbz gettext-0.18.1.1_1.tbz gio-fam-backend-2.34.3.tbz glib-2.34.3.tbz gmake-3.82_1.tbz gnomehier-3.0.tbz gobject-introspection-1.34.2.tbz kbproto-1.0.5.tbz libX11-1.4.4,1.tbz libXau-1.0.6.tbz libXdmcp-1.1.0.tbz libXrender-0.9.6.tbz libffi-3.0.13.tbz libiconv-1.14_1.tbz libpthread-stubs-0.3_3.tbz libxcb-1.7.tbz pcre-8.32.tbz perl-5.14.2_3.tbz pixman-0.24.2.tbz pkgconf-0.9.2_1.tbz png-1.5.15.tbz py27-cairo-1.8.10_1.tbz python27-2.7.3_6.tbz renderproto-0.11.1.tbz xcb-util-0.3.9_1,1.tbz xcb-util-renderutil-0.3.8.tbz xproto-7.0.22.tbz
> adding dependencies
> adding package cairo-1.10.2_5,2.tbz
> Running fc-cache to build fontconfig cache...
> /usr/local/share/fonts: skipping, no such directory
> /usr/local/lib/X11/fonts: caching, new cache contents: 0 fonts, 1 dirs
> /usr/local/lib/X11/fonts/local: caching, new cache contents: 0 fonts, 0 dirs
> /root/.fonts: skipping, no such directory
> /var/db/fontconfig: cleaning cache directory
> /root/.fontconfig: not cleaning non-existent cache directory
> fc-cache: succeeded
> Removing stale symlinks from /usr/bin...
> Skipping /usr/bin/perl
> Skipping /usr/bin/perl5
> Done.
> Creating various symlinks in /usr/bin...
> Symlinking /usr/local/bin/perl5.14.2 to /usr/bin/perl
> Symlinking /usr/local/bin/perl5.14.2 to /usr/bin/perl5
> Done.
> Cleaning up /etc/make.conf... Done.
> Spamming /etc/make.conf... Done.
> Cleaning up /etc/manpath.config... Done.
> Spamming /etc/manpath.config... Done.
>
> ====
> Note that some of the standard modules are provided as separate
> ports since they require extra dependencies:
>
> bsddb databases/py-bsddb
> gdbm databases/py-gdbm
> sqlite3 databases/py-sqlite3
> tkinter x11-toolkits/py-tkinter
>
> Install them as needed.
> ====
>
> No schema files found: doing nothing.
>
> ===============================================================================
>
> Gamin will only provide realtime notification of changes for at most n files,
> where n is the minimum value between (kern.maxfiles * 0.7) and
> (kern.maxfilesperproc - 200). Beyond that limit, files will be polled.
>
> If you often open several large folders with Nautilus, you might want to
> increase the kern.maxfiles tunable (you do not need to set
> kern.maxfilesperproc, since it is computed at boot time from kern.maxfiles).
>
> For a typical desktop, add the following line to /boot/loader.conf, then
> reboot the system:
>
> kern.maxfiles="25000"
>
> The behavior of gamin can be controlled via the various gaminrc files.
> See http://www.gnome.org/~veillard/gamin/config.html on how to create
> these files. In particular, if you find gam_server is taking up too much
> CPU time polling for changes, something like the following may help
> in one of the gaminrc files:
>
> # reduce polling frequency to once per 10 seconds
> # for UFS file systems in order to lower CPU load
> fsset ufs poll 10
>
> ===============================================================================
>
> adding package expat-2.0.1_2.tbz
> skipping expat-2.0.1_2, already added
> adding package fontconfig-2.9.0,1.tbz
> skipping fontconfig-2.9.0,1, already added
> adding package freetype2-2.4.11.tbz
> skipping freetype2-2.4.11, already added
> adding package gamin-0.1.10_5.tbz
> skipping gamin-0.1.10_5, already added
> adding package gettext-0.18.1.1_1.tbz
> skipping gettext-0.18.1.1_1, already added
> adding package gio-fam-backend-2.34.3.tbz
> skipping gio-fam-backend-2.34.3, already added
> adding package glib-2.34.3.tbz
> skipping glib-2.34.3, already added
> adding package gmake-3.82_1.tbz
> adding package gnomehier-3.0.tbz
> ./etc/CORBA missing (created)
> ./etc/CORBA/servers missing (created)
> ./etc/X11 missing (created)
> ./etc/X11/serverconfig missing (created)
> ./etc/X11/starthere missing (created)
> ./etc/X11/sysconfig missing (created)
> ./etc/dconf missing (created)
> ./etc/dconf/db missing (created)
> ./etc/dconf/profile missing (created)
> ./etc/gconf missing (created)
> ./etc/gconf/gconf.xml.defaults missing (created)
> ./etc/gconf/gconf.xml.mandatory missing (created)
> ./etc/gconf/gconf.xml.system missing (created)
> ./etc/gconf/schemas missing (created)
> ./etc/gnome missing (created)
> ./etc/gnome/config missing (created)
> ./etc/gnome-vfs-2.0 missing (created)
> ./etc/gnome-vfs-2.0/modules missing (created)
> ./etc/mateconf missing (created)
> ./etc/mateconf/mateconf.xml.defaults missing (created)
> ./etc/mateconf/mateconf.xml.mandatory missing (created)
> ./etc/mateconf/mateconf.xml.system missing (created)
> ./etc/mateconf/schemas missing (created)
> ./etc/sound missing (created)
> ./etc/sound/events missing (created)
> ./etc/vfs missing (created)
> ./etc/vfs/modules missing (created)
> ./etc/xdg missing (created)
> ./etc/xdg/autostart missing (created)
> ./include/gconf missing (created)
> ./include/gdkcardimage missing (created)
> ./include/gnome-1.0 missing (created)
> ./lib/GConf missing (created)
> ./lib/bonobo missing (created)
> ./lib/bonobo/monikers missing (created)
> ./lib/bonobo/plugin missing (created)
> ./lib/girepository-1.0 missing (created)
> ./lib/gnome-vfs-2.0 missing (created)
> ./lib/gnome-vfs-2.0/modules missing (created)
> ./lib/mate-vfs-2.0 missing (created)
> ./lib/mate-vfs-2.0/modules missing (created)
> ./lib/matecomponent missing (created)
> ./lib/matecomponent/monikers missing (created)
> ./lib/matecomponent-2.0 missing (created)
> ./lib/matecomponent-2.0/samples missing (created)
> ./lib/vfs missing (created)
> ./lib/vfs/modules missing (created)
> ./libdata/bonobo missing (created)
> ./libdata/bonobo/servers missing (created)
> ./libdata/matecomponent missing (created)
> ./libdata/matecomponent/servers missing (created)
> ./share/MateConf missing (created)
> ./share/MateConf/gsettings missing (created)
> ./share/applets missing (created)
> ./share/applets/Amusements missing (created)
> ./share/applets/Clocks missing (created)
> ./share/applets/Monitors missing (created)
> ./share/applets/Multimedia missing (created)
> ./share/applets/Network missing (created)
> ./share/applets/Utility missing (created)
> ./share/application-registry missing (created)
> ./share/capplets missing (created)
> ./share/control-center missing (created)
> ./share/control-center/Desktop missing (created)
> ./share/control-center/Documents missing (created)
> ./share/control-center/Peripherals missing (created)
> ./share/control-center/Session missing (created)
> ./share/control-center/capplets missing (created)
> ./share/control-center/keybindings missing (created)
> ./share/control-center/keybindings/gtk-modules missing (created)
> ./share/control-center-2.0 missing (created)
> ./share/control-center-2.0/capplets missing (created)
> ./share/doc/libgda missing (created)
> ./share/gir-1.0 missing (created)
> ./share/gnome missing (created)
> ./share/gnome/apps missing (created)
> ./share/gnome/apps/Applications missing (created)
> ./share/gnome/apps/Audio missing (created)
> ./share/gnome/apps/Development missing (created)
> ./share/gnome/apps/Games missing (created)
> ./share/gnome/apps/Graphics missing (created)
> ./share/gnome/apps/Internet missing (created)
> ./share/gnome/apps/Multimedia missing (created)
> ./share/gnome/apps/Settings missing (created)
> ./share/gnome/apps/Settings/Desktop missing (created)
> ./share/gnome/apps/Settings/Documents missing (created)
> ./share/gnome/apps/Settings/Peripherals missing (created)
> ./share/gnome/apps/Settings/Session missing (created)
> ./share/gnome/apps/System missing (created)
> ./share/gnome/apps/Utilities missing (created)
> ./share/gnome/autostart missing (created)
> ./share/gnome/help missing (created)
> ./share/gnome/help/fdl missing (created)
> ./share/gnome/help/fdl/C missing (created)
> ./share/gnome/help/gpl missing (created)
> ./share/gnome/help/gpl/C missing (created)
> ./share/gnome/help/lgpl missing (created)
> ./share/gnome/help/lgpl/C missing (created)
> ./share/gnome/panel missing (created)
> ./share/gnome/ui missing (created)
> ./share/gnome/wm-properties missing (created)
> ./share/gnome-2.0 missing (created)
> ./share/gnome-2.0/ui missing (created)
> ./share/gnome-about missing (created)
> ./share/gnome-control-center missing (created)
> ./share/gnome-control-center/keybindings missing (created)
> ./share/gnome-settings-daemon-3.0 missing (created)
> ./share/images missing (created)
> ./share/mate missing (created)
> ./share/mate/help missing (created)
> ./share/mate-2.0 missing (created)
> ./share/mate-2.0/ui missing (created)
> ./share/mate-control-center missing (created)
> ./share/mate-control-center/keybindings missing (created)
> ./share/mc missing (created)
> ./share/mc/templates missing (created)
> ./share/mime-info missing (created)
> ./share/oaf missing (created)
> ./share/omf missing (created)
> ./share/pixmaps/document-icons missing (created)
> ./share/pixmaps/splash missing (created)
> ./share/sgml/docbook missing (created)
> ./share/sgml/docbook/gnome-customization-0.1 missing (created)
> ./share/sounds missing (created)
> ./share/vala missing (created)
> ./share/vala/vapi missing (created)
> ./share/vfolders missing (created)
> ./share/xmodmap missing (created)
> adding package gobject-introspection-1.34.2.tbz
> adding package kbproto-1.0.5.tbz
> skipping kbproto-1.0.5, already added
> adding package libX11-1.4.4,1.tbz
> skipping libX11-1.4.4,1, already added
> adding package libXau-1.0.6.tbz
> skipping libXau-1.0.6, already added
> adding package libXdmcp-1.1.0.tbz
> skipping libXdmcp-1.1.0, already added
> adding package libXrender-0.9.6.tbz
> skipping libXrender-0.9.6, already added
> adding package libffi-3.0.13.tbz
> skipping libffi-3.0.13, already added
> adding package libiconv-1.14_1.tbz
> skipping libiconv-1.14_1, already added
> adding package libpthread-stubs-0.3_3.tbz
> skipping libpthread-stubs-0.3_3, already added
> adding package libxcb-1.7.tbz
> skipping libxcb-1.7, already added
> adding package pcre-8.32.tbz
> skipping pcre-8.32, already added
> adding package perl-5.14.2_3.tbz
> skipping perl-5.14.2_3, already added
> adding package pixman-0.24.2.tbz
> skipping pixman-0.24.2, already added
> adding package pkgconf-0.9.2_1.tbz
> skipping pkgconf-0.9.2_1, already added
> adding package png-1.5.15.tbz
> skipping png-1.5.15, already added
> adding package py27-cairo-1.8.10_1.tbz
> adding package python27-2.7.3_6.tbz
> skipping python27-2.7.3_6, already added
> adding package renderproto-0.11.1.tbz
> skipping renderproto-0.11.1, already added
> adding package xcb-util-0.3.9_1,1.tbz
> skipping xcb-util-0.3.9_1,1, already added
> adding package xcb-util-renderutil-0.3.8.tbz
> skipping xcb-util-renderutil-0.3.8, already added
> adding package xproto-7.0.22.tbz
> skipping xproto-7.0.22, already added
> ===> py27-gobject-3.8.0 depends on executable: g-ir-scanner - found
> ===> py27-gobject-3.8.0 depends on file: /usr/local/libdata/pkgconfig/pycairo.pc - found
> ===> py27-gobject-3.8.0 depends on file: /usr/local/bin/python2.7 - found
> ===> py27-gobject-3.8.0 depends on executable: pkgconf - found
> ===> py27-gobject-3.8.0 depends on executable: gmake - found
> ===> py27-gobject-3.8.0 depends on shared library: ffi - found
> ===> py27-gobject-3.8.0 depends on shared library: glib-2.0 - found
> ===> py27-gobject-3.8.0 depends on shared library: pcre - found
> ===> Configuring for py27-gobject-3.8.0
> configure: loading site script /usr/ports/Templates/config.site
> checking whether gmake supports nested variables... yes
> checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
> checking whether build environment is sane... yes
> checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p
> checking for gawk... (cached) /usr/bin/awk
> checking whether gmake sets $(MAKE)... yes
> checking build system type... amd64-portbld-freebsd8.3
> checking host system type... amd64-portbld-freebsd8.3
> checking for some Win32 platform... no
> checking for native Win32... no
> checking how to print strings... printf
> checking for style of include used by gmake... GNU
> checking for gcc... cc
> checking whether the C compiler works... yes
> checking for C compiler default output file name... a.out
> checking for suffix of executables...
> checking whether we are cross compiling... no
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether cc accepts -g... yes
> checking for cc option to accept ISO C89... none needed
> checking dependency style of cc... gcc3
> checking for a sed that does not truncate output... (cached) /usr/bin/sed
> checking for grep that handles long lines and -e... (cached) /usr/bin/grep
> checking for egrep... (cached) /usr/bin/egrep
> checking for fgrep... (cached) /usr/bin/fgrep
> checking for ld used by cc... /usr/bin/ld
> checking if the linker (/usr/bin/ld) is GNU ld... yes
> checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
> checking the name lister (/usr/bin/nm -B) interface... BSD nm
> checking whether ln -s works... yes
> checking the maximum length of command line arguments... (cached) 262144
> checking whether the shell understands some XSI constructs... yes
> checking whether the shell understands "+="... no
> checking how to convert amd64-portbld-freebsd8.3 file names to amd64-portbld-freebsd8.3 format... func_convert_file_noop
> checking how to convert amd64-portbld-freebsd8.3 file names to toolchain format... func_convert_file_noop
> checking for /usr/bin/ld option to reload object files... -r
> checking for objdump... objdump
> checking how to recognize dependent libraries... pass_all
> checking for dlltool... no
> checking how to associate runtime and link libraries... printf %s\n
> checking for ar... ar
> checking for archiver @FILE support... no
> checking for strip... strip
> checking for ranlib... ranlib
> checking command to parse /usr/bin/nm -B output from cc object... ok
> checking for sysroot... no
> checking for mt... mt
> checking if mt is a manifest tool... no
> checking how to run the C preprocessor... cpp
> checking for ANSI C header files... yes
> checking for sys/types.h... (cached) yes
> checking for sys/stat.h... (cached) yes
> checking for stdlib.h... (cached) yes
> checking for string.h... (cached) yes
> checking for memory.h... (cached) yes
> checking for strings.h... (cached) yes
> checking for inttypes.h... (cached) yes
> checking for stdint.h... (cached) yes
> checking for unistd.h... (cached) yes
> checking for dlfcn.h... (cached) yes
> checking for objdir... .libs
> checking if cc supports -fno-rtti -fno-exceptions... no
> checking for cc option to produce PIC... -fPIC -DPIC
> checking if cc PIC flag -fPIC -DPIC works... yes
> checking if cc static flag -static works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.o... (cached) yes
> checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes
> checking whether -lc should be explicitly linked in... no
> checking dynamic linker characteristics... freebsd8.3 ld.so
> checking how to hardcode library paths into programs... immediate
> checking for shl_load... no
> checking for shl_load in -ldld... no
> checking for dlopen... yes
> checking whether a program can dlopen itself... yes
> checking whether a statically linked program can dlopen itself... no
> checking whether stripping libraries is possible... yes
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... no
> checking for library containing strerror... none required
> checking for gcc... (cached) cc
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether cc accepts -g... (cached) yes
> checking for cc option to accept ISO C89... (cached) none needed
> checking dependency style of cc... (cached) gcc3
> checking whether cc understands -c and -o together... yes
> /usr/local/bin/python2.7
> checking whether /usr/local/bin/python2.7 version >= 2.6... yes
> checking for /usr/local/bin/python2.7 version... 2.7
> checking for /usr/local/bin/python2.7 platform... freebsd8
> checking for /usr/local/bin/python2.7 script directory... ${prefix}/lib/python2.7/site-packages
> checking for /usr/local/bin/python2.7 extension module directory... ${exec_prefix}/lib/python2.7/site-packages
> checking for python version... (cached) 2.7
> checking for python platform... (cached) freebsd8
> checking for python script directory... (cached) ${prefix}/lib/python2.7/site-packages
> checking for python extension module directory... (cached) ${exec_prefix}/lib/python2.7/site-packages
> checking for headers required to compile python extensions... found
> checking for PySignal_SetWakeupFd in Python.h... yes
> checking for python module thread... yes
> checking whether to enable threading in pygobject... yes
> ./configure: ./libtool: not found
> checking pkg-config is at least version 0.16... yes
> checking for GLIB - version >= 2.34.2... yes (version 2.34.3)
> checking for ffi... checking for FFI... yes
> checking for GIO... yes
> checking for GI... yes
> checking for CAIRO... yes
> checking for PYCAIRO... yes
> checking whether gcc understands -Wall... yes
> checking whether gcc understands -Wstrict-prototypes... yes
> checking whether gcc understands -Wnested-externs... yes
> checking whether gcc understands -Werror=missing-prototypes... yes
> checking whether gcc understands -Werror=implicit-function-declaration... yes
> checking whether gcc understands -Werror=pointer-arith... yes
> checking whether gcc understands -Werror=init-self... yes
> checking whether gcc understands -Werror=format-security... no
> checking whether gcc understands -Werror=format=2... yes
> checking whether gcc understands -Werror=missing-include-dirs... yes
> checking what warning flags to pass to the C compiler... -Wall -Wstrict-prototypes -Wnested-externs -Werror=missing-prototypes -Werror=implicit-function-declaration -Werror=pointer-arith -Werror=init-self -Werror=format=2 -Werror=missing-include-dirs
> checking what language compliance flags to pass to the C compiler...
> checking for Gnome code coverage support... yes
> checking whether to build with code coverage support... no
> checking whether cc understands -Wall... yes
> checking whether cc understands -Werror=unused-variable... yes
> checking whether cc understands -std=c9x... yes
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating pygobject-3.0.pc
> config.status: creating pygobject-3.0-uninstalled.pc
> config.status: creating gi/Makefile
> config.status: creating gi/repository/Makefile
> config.status: creating gi/overrides/Makefile
> config.status: creating gi/_glib/Makefile
> config.status: creating gi/_gobject/Makefile
> config.status: creating examples/Makefile
> config.status: creating tests/Makefile
> config.status: creating pygtkcompat/Makefile
> config.status: creating PKG-INFO
> config.status: creating config.h
> config.status: executing depfiles commands
> config.status: executing libtool commands
>
> pygobject 3.8.0
>
> Using python interpreter: /usr/local/bin/python2.7
> libffi support: yes
> cairo support: yes
> thread support: yes
> code coverage support: no
>
> ===> Building for py27-gobject-3.8.0
> gmake all-recursive
> gmake[1]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0'
> Making all in examples
> gmake[2]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/examples'
> gmake[2]: Nothing to be done for `all'.
> gmake[2]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/examples'
> Making all in gi
> gmake[2]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi'
> Making all in repository
> gmake[3]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/repository'
> for f in __init__.py; do \
> [ -e ./$f ] || ln -s ./$f ./$f; \
> done
> gmake[3]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/repository'
> Making all in overrides
> gmake[3]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/overrides'
> for f in GLib.py Gtk.py Gdk.py GObject.py Gio.py GIMarshallingTests.py Pango.py keysyms.py __init__.py; do \
> [ -e ./$f ] || ln -s ./$f ./$f; \
> done
> gmake[3]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/overrides'
> Making all in _glib
> gmake[3]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/_glib'
> CC libpyglib_gi_2_0_python2.7_la-pyglib.lo
> CCLD libpyglib-gi-2.0-python2.7.la
> CC _glib_la-glibmodule.lo
> CC _glib_la-pygoptioncontext.lo
> CC _glib_la-pygoptiongroup.lo
> CC _glib_la-pygsource.lo
> CC _glib_la-pygspawn.lo
> CCLD _glib.la
> ln -s -f .libs/_glib.so _glib.so
> for f in __init__.py option.py; do \
> [ -e ./$f ] || ln -s ./$f ./$f; \
> done
> gmake[3]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/_glib'
> Making all in _gobject
> gmake[3]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/_gobject'
> CC _gobject_la-gobjectmodule.lo
> CC _gobject_la-pygboxed.lo
> CC _gobject_la-pygenum.lo
> CC _gobject_la-pygflags.lo
> CC _gobject_la-pyginterface.lo
> CC _gobject_la-pygobject.lo
> pygobject.c: In function 'pygobject_data_free':
> pygobject.c:82: warning: 'state' may be used uninitialized in this function
> CC _gobject_la-pygparamspec.lo
> CC _gobject_la-pygpointer.lo
> CC _gobject_la-pygtype.lo
> pygtype.c: In function 'pyg_value_array_from_pyobject':
> pygtype.c:682: warning: 'g_value_array_new' is deprecated (declared at /usr/local/include/glib-2.0/gobject/gvaluearray.h:69)
> pygtype.c:692: warning: 'g_value_array_free' is deprecated (declared at /usr/local/include/glib-2.0/gobject/gvaluearray.h:72)
> pygtype.c:704: warning: 'g_value_array_free' is deprecated (declared at /usr/local/include/glib-2.0/gobject/gvaluearray.h:72)
> pygtype.c:717: warning: 'g_value_array_free' is deprecated (declared at /usr/local/include/glib-2.0/gobject/gvaluearray.h:72)
> pygtype.c:722: warning: 'g_value_array_append' is deprecated (declared at /usr/local/include/glib-2.0/gobject/gvaluearray.h:83)
> pygtype.c: In function 'pyg_value_from_pyobject':
> pygtype.c:1025: warning: 'g_value_array_get_type' is deprecated (declared at /usr/local/include/glib-2.0/gobject/gvaluearray.h:62)
> pygtype.c: In function 'pyg_value_as_pyobject':
> pygtype.c:1207: warning: 'g_value_array_get_type' is deprecated (declared at /usr/local/include/glib-2.0/gobject/gvaluearray.h:62)
> CCLD _gobject.la
> ln -s -f .libs/_gobject.so _gobject.so
> for f in __init__.py constants.py propertyhelper.py signalhelper.py; do \
> [ -e ./$f ] || ln -s ./$f ./$f; \
> done
> gmake[3]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/_gobject'
> gmake[3]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi'
> CC _gi_la-pygi-repository.lo
> CC _gi_la-pygi-info.lo
> CC _gi_la-pygi-foreign.lo
> CC _gi_la-pygi-struct.lo
> CC _gi_la-pygi-source.lo
> CC _gi_la-pygi-argument.lo
> CC _gi_la-pygi-type.lo
> CC _gi_la-pygi-boxed.lo
> CC _gi_la-pygi-closure.lo
> CC _gi_la-pygi-ccallback.lo
> CC _gi_la-pygi-property.lo
> CC _gi_la-pygi-signal-closure.lo
> CC _gi_la-gimodule.lo
> CC _gi_la-pygi-invoke.lo
> CC _gi_la-pygi-cache.lo
> CC _gi_la-pygi-marshal-from-py.lo
> CC _gi_la-pygi-marshal-to-py.lo
> CC _gi_la-pygi-marshal-cleanup.lo
> CCLD _gi.la
> CC _gi_cairo_la-pygi-foreign-cairo.lo
> CCLD _gi_cairo.la
> ln -s -f .libs/_gi.so _gi.so
> ln -s -f .libs/_gi_cairo.so _gi_cairo.so
> for f in __init__.py types.py module.py importer.py pygtkcompat.py; do \
> [ -e ./$f ] || ln -s ./$f ./$f; \
> done
> gmake[3]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi'
> gmake[2]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi'
> Making all in tests
> gmake[2]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/tests'
> CC libgimarshallingtests_la-gimarshallingtests.lo
> In file included from /usr/local/share/gobject-introspection-1.0/tests/gimarshallingtests.c:5:
> /usr/local/share/gobject-introspection-1.0/tests/gimarshallingtests.h:565: warning: function declaration isn't a prototype
> /usr/local/share/gobject-introspection-1.0/tests/gimarshallingtests.h:964: warning: function declaration isn't a prototype
> /usr/local/share/gobject-introspection-1.0/tests/gimarshallingtests.c:4567: warning: function declaration isn't a prototype
> GEN libgimarshallingtests.la
> CC libregress_la-regress.lo
> /usr/local/share/gobject-introspection-1.0/tests/regress.c:911: warning: function declaration isn't a prototype
> /usr/local/share/gobject-introspection-1.0/tests/regress.c:1032: warning: function declaration isn't a prototype
> /usr/local/share/gobject-introspection-1.0/tests/regress.c:1156: warning: function declaration isn't a prototype
> /usr/local/share/gobject-introspection-1.0/tests/regress.c:1167: warning: function declaration isn't a prototype
> /usr/local/share/gobject-introspection-1.0/tests/regress.c:1180: warning: function declaration isn't a prototype
> GEN libregress.la
> CC testhelper_la-testhelpermodule.lo
> testhelpermodule.c: In function '_wrap_test_value_array':
> testhelpermodule.c:516: warning: 'g_value_array_get_type' is deprecated (declared at /usr/local/include/glib-2.0/gobject/gvaluearray.h:62)
> CC testhelper_la-test-floating.lo
> CC testhelper_la-test-thread.lo
> CC testhelper_la-test-unknown.lo
> GEN testhelper.la
> test -L libgimarshallingtests.so || ln -s .libs/libgimarshallingtests.so libgimarshallingtests.so
> test -L libregress.so || ln -s .libs/libregress.so libregress.so
> test -L testhelper.so || ln -s .libs/testhelper.so testhelper.so
> gmake[2]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/tests'
> Making all in pygtkcompat
> gmake[2]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/pygtkcompat'
> for f in __init__.py generictreemodel.py pygtkcompat.py; do \
> [ -e ./$f ] || ln -s ./$f ./$f; \
> done
> gmake[2]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/pygtkcompat'
> gmake[2]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0'
> gmake[2]: Nothing to be done for `all-am'.
> gmake[2]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0'
> gmake[1]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0'
> ================================================================
> ====================<phase 5: make test>====================
> make: don't know how to make regression-test(continuing)
> ================================================================
> ====================<phase 6: make install>====================
> add_pkg cairo-1.10.2_5,2.tbz expat-2.0.1_2.tbz fontconfig-2.9.0,1.tbz freetype2-2.4.11.tbz gamin-0.1.10_5.tbz gettext-0.18.1.1_1.tbz gio-fam-backend-2.34.3.tbz glib-2.34.3.tbz gnomehier-3.0.tbz gobject-introspection-1.34.2.tbz kbproto-1.0.5.tbz libX11-1.4.4,1.tbz libXau-1.0.6.tbz libXdmcp-1.1.0.tbz libXrender-0.9.6.tbz libffi-3.0.13.tbz libiconv-1.14_1.tbz libpthread-stubs-0.3_3.tbz libxcb-1.7.tbz pcre-8.32.tbz perl-5.14.2_3.tbz pixman-0.24.2.tbz pkgconf-0.9.2_1.tbz png-1.5.15.tbz py27-cairo-1.8.10_1.tbz python27-2.7.3_6.tbz renderproto-0.11.1.tbz xcb-util-0.3.9_1,1.tbz xcb-util-renderutil-0.3.8.tbz xproto-7.0.22.tbz
> adding dependencies
> adding package cairo-1.10.2_5,2.tbz
> skipping cairo-1.10.2_5,2, already added
> adding package expat-2.0.1_2.tbz
> skipping expat-2.0.1_2, already added
> adding package fontconfig-2.9.0,1.tbz
> skipping fontconfig-2.9.0,1, already added
> adding package freetype2-2.4.11.tbz
> skipping freetype2-2.4.11, already added
> adding package gamin-0.1.10_5.tbz
> skipping gamin-0.1.10_5, already added
> adding package gettext-0.18.1.1_1.tbz
> skipping gettext-0.18.1.1_1, already added
> adding package gio-fam-backend-2.34.3.tbz
> skipping gio-fam-backend-2.34.3, already added
> adding package glib-2.34.3.tbz
> skipping glib-2.34.3, already added
> adding package gnomehier-3.0.tbz
> skipping gnomehier-3.0, already added
> adding package gobject-introspection-1.34.2.tbz
> skipping gobject-introspection-1.34.2, already added
> adding package kbproto-1.0.5.tbz
> skipping kbproto-1.0.5, already added
> adding package libX11-1.4.4,1.tbz
> skipping libX11-1.4.4,1, already added
> adding package libXau-1.0.6.tbz
> skipping libXau-1.0.6, already added
> adding package libXdmcp-1.1.0.tbz
> skipping libXdmcp-1.1.0, already added
> adding package libXrender-0.9.6.tbz
> skipping libXrender-0.9.6, already added
> adding package libffi-3.0.13.tbz
> skipping libffi-3.0.13, already added
> adding package libiconv-1.14_1.tbz
> skipping libiconv-1.14_1, already added
> adding package libpthread-stubs-0.3_3.tbz
> skipping libpthread-stubs-0.3_3, already added
> adding package libxcb-1.7.tbz
> skipping libxcb-1.7, already added
> adding package pcre-8.32.tbz
> skipping pcre-8.32, already added
> adding package perl-5.14.2_3.tbz
> skipping perl-5.14.2_3, already added
> adding package pixman-0.24.2.tbz
> skipping pixman-0.24.2, already added
> adding package pkgconf-0.9.2_1.tbz
> skipping pkgconf-0.9.2_1, already added
> adding package png-1.5.15.tbz
> skipping png-1.5.15, already added
> adding package py27-cairo-1.8.10_1.tbz
> skipping py27-cairo-1.8.10_1, already added
> adding package python27-2.7.3_6.tbz
> skipping python27-2.7.3_6, already added
> adding package renderproto-0.11.1.tbz
> skipping renderproto-0.11.1, already added
> adding package xcb-util-0.3.9_1,1.tbz
> skipping xcb-util-0.3.9_1,1, already added
> adding package xcb-util-renderutil-0.3.8.tbz
> skipping xcb-util-renderutil-0.3.8, already added
> adding package xproto-7.0.22.tbz
> skipping xproto-7.0.22, already added
> ===> Installing for py27-gobject-3.8.0
> ===> py27-gobject-3.8.0 depends on executable: g-ir-scanner - found
> ===> py27-gobject-3.8.0 depends on file: /usr/local/libdata/pkgconfig/pycairo.pc - found
> ===> py27-gobject-3.8.0 depends on file: /usr/local/bin/python2.7 - found
> ===> py27-gobject-3.8.0 depends on file: /usr/local/lib/gio/modules/libgiofam.so - found
> ===> py27-gobject-3.8.0 depends on shared library: ffi - found
> ===> py27-gobject-3.8.0 depends on shared library: glib-2.0 - found
> ===> py27-gobject-3.8.0 depends on shared library: pcre - found
> ===> Generating temporary packing list
> ===> Checking if devel/py-gobject3 already installed
> Making install in examples
> gmake[1]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/examples'
> gmake[2]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/examples'
> gmake[2]: Nothing to be done for `install-exec-am'.
> gmake[2]: Nothing to be done for `install-data-am'.
> gmake[2]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/examples'
> gmake[1]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/examples'
> Making install in gi
> gmake[1]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi'
> Making install in repository
> gmake[2]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/repository'
> for f in __init__.py; do \
> [ -e ./$f ] || ln -s ./$f ./$f; \
> done
> gmake[3]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/repository'
> gmake[3]: Nothing to be done for `install-exec-am'.
> /bin/mkdir -p '/usr/local/lib/python2.7/site-packages/gi/repository'
> install -o root -g wheel -m 444 __init__.py '/usr/local/lib/python2.7/site-packages/gi/repository'
> Byte-compiling python modules...
> __init__.py
> Byte-compiling python modules (optimized versions) ...
> __init__.py
> gmake[3]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/repository'
> gmake[2]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/repository'
> Making install in overrides
> gmake[2]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/overrides'
> for f in GLib.py Gtk.py Gdk.py GObject.py Gio.py GIMarshallingTests.py Pango.py keysyms.py __init__.py; do \
> [ -e ./$f ] || ln -s ./$f ./$f; \
> done
> gmake[3]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/overrides'
> gmake[3]: Nothing to be done for `install-exec-am'.
> /bin/mkdir -p '/usr/local/lib/python2.7/site-packages/gi/overrides'
> install -o root -g wheel -m 444 GLib.py Gtk.py Gdk.py GObject.py Gio.py GIMarshallingTests.py Pango.py keysyms.py __init__.py '/usr/local/lib/python2.7/site-packages/gi/overrides'
> Byte-compiling python modules...
> GLib.pyGtk.pyGdk.pyGObject.pyGio.pyGIMarshallingTests.pyPango.pykeysyms.py__init__.py
> Byte-compiling python modules (optimized versions) ...
> GLib.pyGtk.pyGdk.pyGObject.pyGio.pyGIMarshallingTests.pyPango.pykeysyms.py__init__.py
> gmake[3]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/overrides'
> gmake[2]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/overrides'
> Making install in _glib
> gmake[2]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/_glib'
> gmake[3]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/_glib'
> /bin/mkdir -p '/usr/local/lib'
> /bin/sh ../../libtool --mode=install /usr/bin/install -c -o root -g wheel libpyglib-gi-2.0-python2.7.la '/usr/local/lib'
> libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpyglib-gi-2.0-python2.7.so.0 /usr/local/lib/libpyglib-gi-2.0-python2.7.so.0
> libtool: install: (cd /usr/local/lib && { ln -s -f libpyglib-gi-2.0-python2.7.so.0 libpyglib-gi-2.0-python2.7.so || { rm -f libpyglib-gi-2.0-python2.7.so && ln -s libpyglib-gi-2.0-python2.7.so.0 libpyglib-gi-2.0-python2.7.so; }; })
> libtool: install: (cd /usr/local/lib && { ln -s -f libpyglib-gi-2.0-python2.7.so.0 libpyglib-gi-2.0-python2.7.so || { rm -f libpyglib-gi-2.0-python2.7.so && ln -s libpyglib-gi-2.0-python2.7.so.0 libpyglib-gi-2.0-python2.7.so; }; })
> libtool: install: /usr/bin/install -c -o root -g wheel .libs/libpyglib-gi-2.0-python2.7.lai /usr/local/lib/libpyglib-gi-2.0-python2.7.la
> /bin/mkdir -p '/usr/local/lib/python2.7/site-packages/gi/_glib'
> /bin/sh ../../libtool --mode=install /usr/bin/install -c -o root -g wheel _glib.la '/usr/local/lib/python2.7/site-packages/gi/_glib'
> libtool: install: warning: relinking `_glib.la'
> libtool: install: (cd /work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/_glib; /bin/sh /work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/libtool --silent --tag CC --mode=relink cc -pthread -I/usr/local/include/glib-2.0 -I/usr/local/include -O2 -pipe -fno-strict-aliasing -Wall -Werror=unused-variable -std=c9x -Wall -Wstrict-prototypes -Wnested-externs -Werror=missing-prototypes -Werror=implicit-function-declaration -Werror=pointer-arith -Werror=init-self -Werror=format=2 -Werror=missing-include-dirs -module -avoid-version -export-symbols-regex "_glib|PyInit__glib" -o _glib.la -rpath /usr/local/lib/python2.7/site-packages/gi/_glib _glib_la-glibmodule.lo _glib_la-pygoptioncontext.lo _glib_la-pygoptiongroup.lo _glib_la-pygsource.lo _glib_la-pygspawn.lo -lgobject-2.0 -lgthread-2.0 -pthread -L/usr/local/lib -lglib-2.0 libpyglib-gi-2.0-python2.7.la )
> libtool: install: /usr/bin/install -c -o root -g wheel .libs/_glib.soT /usr/local/lib/python2.7/site-packages/gi/_glib/_glib.so
> libtool: install: /usr/bin/install -c -o root -g wheel .libs/_glib.lai /usr/local/lib/python2.7/site-packages/gi/_glib/_glib.la
> /bin/mkdir -p '/usr/local/lib/python2.7/site-packages/gi/_glib'
> install -o root -g wheel -m 444 __init__.py option.py '/usr/local/lib/python2.7/site-packages/gi/_glib'
> Byte-compiling python modules...
> __init__.pyoption.py
> Byte-compiling python modules (optimized versions) ...
> __init__.pyoption.py
> gmake[3]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/_glib'
> gmake[2]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/_glib'
> Making install in _gobject
> gmake[2]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/_gobject'
> gmake[3]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/_gobject'
> gmake[3]: Nothing to be done for `install-exec-am'.
> /bin/mkdir -p '/usr/local/include/pygobject-3.0'
> install -o root -g wheel -m 444 pygobject.h '/usr/local/include/pygobject-3.0'
> /bin/mkdir -p '/usr/local/lib/python2.7/site-packages/gi/_gobject'
> /bin/sh ../../libtool --mode=install /usr/bin/install -c -o root -g wheel _gobject.la '/usr/local/lib/python2.7/site-packages/gi/_gobject'
> libtool: install: warning: relinking `_gobject.la'
> libtool: install: (cd /work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/_gobject; /bin/sh /work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/libtool --silent --tag CC --mode=relink cc -I/usr/local/include/python2.7 -I/usr/local/include/python2.7 -DPY_SSIZE_T_CLEAN -I../../gi/_glib -I../../gi -pthread -I/usr/local/include/glib-2.0 -I/usr/local/include -I/usr/local/include/gobject-introspection-1.0 -pthread -I/usr/local/include/glib-2.0 -I/usr/local/include -I/usr/local/lib/libffi-3.0.13/include -O2 -pipe -fno-strict-aliasing -Wall -Werror=unused-variable -std=c9x -Wall -Wstrict-prototypes -Wnested-externs -Werror=missing-prototypes -Werror=implicit-function-declaration -Werror=pointer-arith -Werror=init-self -Werror=format=2 -Werror=missing-include-dirs -module -avoid-version -export-symbols-regex "_gobject|PyInit__gobject" -o _gobject.la -rpath /usr/local/lib/python2.7/site-packages/gi/_gobject _gobject_la-gobjectmodule.lo _gobject_la-pygboxed.lo _gobject_la-pygenum.
> lo _gobj
> ect_la-pygflags.lo _gobject_la-pyginterface.lo _gobject_la-pygobject.lo _gobject_la-pygparamspec.lo _gobject_la-pygpointer.lo _gobject_la-pygtype.lo -lgobject-2.0 -lgthread-2.0 -pthread -L/usr/local/lib -lglib-2.0 -lgirepository-1.0 -lgobject-2.0 -L/usr/local/lib -lglib-2.0 ../../gi/_glib/libpyglib-gi-2.0-python2.7.la )
> libtool: install: /usr/bin/install -c -o root -g wheel .libs/_gobject.soT /usr/local/lib/python2.7/site-packages/gi/_gobject/_gobject.so
> libtool: install: /usr/bin/install -c -o root -g wheel .libs/_gobject.lai /usr/local/lib/python2.7/site-packages/gi/_gobject/_gobject.la
> /bin/mkdir -p '/usr/local/lib/python2.7/site-packages/gi/_gobject'
> install -o root -g wheel -m 444 __init__.py constants.py propertyhelper.py signalhelper.py '/usr/local/lib/python2.7/site-packages/gi/_gobject'
> Byte-compiling python modules...
> __init__.pyconstants.pypropertyhelper.pysignalhelper.py
> Byte-compiling python modules (optimized versions) ...
> __init__.pyconstants.pypropertyhelper.pysignalhelper.py
> gmake[3]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/_gobject'
> gmake[2]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi/_gobject'
> gmake[2]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi'
> for f in __init__.py types.py module.py importer.py pygtkcompat.py; do \
> [ -e ./$f ] || ln -s ./$f ./$f; \
> done
> gmake[3]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi'
> gmake[3]: Nothing to be done for `install-exec-am'.
> /bin/mkdir -p '/usr/local/lib/python2.7/site-packages/gi'
> /bin/sh ../libtool --mode=install /usr/bin/install -c -o root -g wheel _gi.la _gi_cairo.la '/usr/local/lib/python2.7/site-packages/gi'
> libtool: install: warning: relinking `_gi.la'
> libtool: install: (cd /work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi; /bin/sh /work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/libtool --silent --tag CC --mode=relink cc -I/usr/local/include/gobject-introspection-1.0 -pthread -I/usr/local/include/glib-2.0 -I/usr/local/include -I/usr/local/lib/libffi-3.0.13/include -O2 -pipe -fno-strict-aliasing -Wall -Werror=unused-variable -std=c9x -Wall -Wstrict-prototypes -Wnested-externs -Werror=missing-prototypes -Werror=implicit-function-declaration -Werror=pointer-arith -Werror=init-self -Werror=format=2 -Werror=missing-include-dirs -module -avoid-version -export-symbols-regex "init_gi|PyInit__gi" -o _gi.la -rpath /usr/local/lib/python2.7/site-packages/gi _gi_la-pygi-repository.lo _gi_la-pygi-info.lo _gi_la-pygi-foreign.lo _gi_la-pygi-struct.lo _gi_la-pygi-source.lo _gi_la-pygi-argument.lo _gi_la-pygi-type.lo _gi_la-pygi-boxed.lo _gi_la-pygi-closure.lo _gi_la-pygi-ccallback.lo _gi_la-pygi-property.lo _gi_la-pygi-signal-cl
> osure.lo
> _gi_la-gimodule.lo _gi_la-pygi-invoke.lo _gi_la-pygi-cache.lo _gi_la-pygi-marshal-from-py.lo _gi_la-pygi-marshal-to-py.lo _gi_la-pygi-marshal-cleanup.lo -lgirepository-1.0 -lgobject-2.0 -L/usr/local/lib -lglib-2.0 ../gi/_glib/libpyglib-gi-2.0-python2.7.la )
> libtool: install: /usr/bin/install -c -o root -g wheel .libs/_gi.soT /usr/local/lib/python2.7/site-packages/gi/_gi.so
> libtool: install: /usr/bin/install -c -o root -g wheel .libs/_gi.lai /usr/local/lib/python2.7/site-packages/gi/_gi.la
> libtool: install: /usr/bin/install -c -o root -g wheel .libs/_gi_cairo.so /usr/local/lib/python2.7/site-packages/gi/_gi_cairo.so
> libtool: install: /usr/bin/install -c -o root -g wheel .libs/_gi_cairo.lai /usr/local/lib/python2.7/site-packages/gi/_gi_cairo.la
> /bin/mkdir -p '/usr/local/lib/python2.7/site-packages/gi'
> install -o root -g wheel -m 444 __init__.py types.py module.py importer.py pygtkcompat.py '/usr/local/lib/python2.7/site-packages/gi'
> Byte-compiling python modules...
> __init__.pytypes.pymodule.pyimporter.pypygtkcompat.py
> Byte-compiling python modules (optimized versions) ...
> __init__.pytypes.pymodule.pyimporter.pypygtkcompat.py
> gmake[3]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi'
> gmake[2]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi'
> gmake[1]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/gi'
> Making install in tests
> gmake[1]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/tests'
> gmake[2]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/tests'
> gmake[2]: Nothing to be done for `install-exec-am'.
> gmake[2]: Nothing to be done for `install-data-am'.
> gmake[2]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/tests'
> gmake[1]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/tests'
> Making install in pygtkcompat
> gmake[1]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/pygtkcompat'
> for f in __init__.py generictreemodel.py pygtkcompat.py; do \
> [ -e ./$f ] || ln -s ./$f ./$f; \
> done
> gmake[2]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/pygtkcompat'
> gmake[2]: Nothing to be done for `install-exec-am'.
> /bin/mkdir -p '/usr/local/lib/python2.7/site-packages/pygtkcompat'
> install -o root -g wheel -m 444 __init__.py generictreemodel.py pygtkcompat.py '/usr/local/lib/python2.7/site-packages/pygtkcompat'
> Byte-compiling python modules...
> __init__.pygenerictreemodel.pypygtkcompat.py
> Byte-compiling python modules (optimized versions) ...
> __init__.pygenerictreemodel.pypygtkcompat.py
> gmake[2]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/pygtkcompat'
> gmake[1]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/pygtkcompat'
> gmake[1]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0'
> gmake[2]: Entering directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0'
> /bin/sh /work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/install-sh -d /usr/local/lib/python2.7/site-packages
> /bin/sh /work/a/ports/devel/py-gobject3/work/pygobject-3.8.0/install-sh -d /usr/local/lib/python2.7/site-packages
> cp ./PKG-INFO /usr/local/lib/python2.7/site-packages/pygobject-3.8.0-pypython2.7-freebsd-8.3-RELEASE-p8-amd64.egg-info
> /bin/mkdir -p '/usr/local/libdata/pkgconfig'
> install -o root -g wheel -m 444 pygobject-3.0.pc '/usr/local/libdata/pkgconfig'
> gmake[2]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0'
> gmake[1]: Leaving directory `/work/a/ports/devel/py-gobject3/work/pygobject-3.8.0'
> ===> Running ldconfig
> /sbin/ldconfig -m /usr/local/lib
> ===> Registering installation for py27-gobject-3.8.0
> ================================================================
> ====================<phase 7: make package>====================
> ===> Building package for py27-gobject-3.8.0
> Deleting py27-gobject-3.8.0
> pkg_delete: unable to completely remove directory '/usr/local/lib/python2.7/site-packages/gi/overrides'
> pkg_delete: unable to completely remove directory '/usr/local/lib/python2.7/site-packages/gi/_gobject'
> pkg_delete: unable to completely remove directory '/usr/local/lib/python2.7/site-packages/gi'
> pkg_delete: couldn't entirely delete package (perhaps the packing list is
> incorrectly specified?)
> ================================================================
>
> === Checking filesystem state
> list of extra files and directories in / (not present before this port was installed but present after it was deinstalled)
> 827404 3 drwxr-xr-x 4 root wheel 4 May 10 05:47 usr/local/lib/python2.7/site-packages/gi
> 1144211 3 drwxr-xr-x 2 root wheel 5 May 10 05:47 usr/local/lib/python2.7/site-packages/gi/_gobject
> 1140347 20 -rw-r--r-- 1 root wheel 9557 May 10 05:46 usr/local/lib/python2.7/site-packages/gi/_gobject/signalhelper.pyo
> 1142436 20 -r--r--r-- 1 root wheel 9321 May 10 05:46 usr/local/lib/python2.7/site-packages/gi/_gobject/signalhelper.py
> 1142540 20 -rw-r--r-- 1 root wheel 9557 May 10 05:46 usr/local/lib/python2.7/site-packages/gi/_gobject/signalhelper.pyc
> 829602 3 drwxr-xr-x 2 root wheel 5 May 10 05:47 usr/local/lib/python2.7/site-packages/gi/overrides
> 1172386 43 -rw-r--r-- 1 root wheel 21453 May 10 05:46 usr/local/lib/python2.7/site-packages/gi/overrides/GObject.pyo
> 830953 50 -r--r--r-- 1 root wheel 24721 May 10 05:46 usr/local/lib/python2.7/site-packages/gi/overrides/GObject.py
> 1171666 43 -rw-r--r-- 1 root wheel 21453 May 10 05:46 usr/local/lib/python2.7/site-packages/gi/overrides/GObject.pyc
> 103296 3 -rw-r--r-- 1 root wheel 1002 May 10 05:46 usr/local/lib/python2.7/site-packages/pygobject-3.8.0-pypython2.7-freebsd-8.3-RELEASE-p8-amd64.egg-info
> 677850 3 drwxr-xr-x 2 root wheel 11 May 10 05:46 usr/local/lib/python2.7/site-packages/pygtkcompat
> 678868 47 -rw-r--r-- 1 root wheel 23211 May 10 05:46 usr/local/lib/python2.7/site-packages/pygtkcompat/pygtkcompat.pyo
> 678819 35 -rw-r--r-- 1 root wheel 17400 May 10 05:46 usr/local/lib/python2.7/site-packages/pygtkcompat/generictreemodel.pyo
> 677855 38 -r--r--r-- 1 root wheel 18745 May 10 05:46 usr/local/lib/python2.7/site-packages/pygtkcompat/pygtkcompat.py
> 677857 2 -rw-r--r-- 1 root wheel 502 May 10 05:46 usr/local/lib/python2.7/site-packages/pygtkcompat/__init__.pyc
> 677854 29 -r--r--r-- 1 root wheel 14083 May 10 05:46 usr/local/lib/python2.7/site-packages/pygtkcompat/generictreemodel.py
> 677859 35 -rw-r--r-- 1 root wheel 17400 May 10 05:46 usr/local/lib/python2.7/site-packages/pygtkcompat/generictreemodel.pyc
> 677864 47 -rw-r--r-- 1 root wheel 23211 May 10 05:46 usr/local/lib/python2.7/site-packages/pygtkcompat/pygtkcompat.pyc
> 678790 2 -rw-r--r-- 1 root wheel 502 May 10 05:46 usr/local/lib/python2.7/site-packages/pygtkcompat/__init__.pyo
> 677852 3 -r--r--r-- 1 root wheel 547 May 10 05:46 usr/local/lib/python2.7/site-packages/pygtkcompat/__init__.py
> ================================================================
> build of /usr/ports/devel/py-gobject3 ended at Fri May 10 05:47:10 UTC 2013
>
+-----------------oOO--(_)--OOo-------------------------+
With best Regards,
Martin Wilke (miwi_(at)_FreeBSD.org)
Mess with the Best, Die like the Rest
More information about the freebsd-gnome
mailing list