[ports-i386@FreeBSD.org: babl-0.0.22_1 failed on i386 8]
Erwin Lansing
erwin at FreeBSD.org
Sun Mar 22 18:41:04 PDT 2009
FYI; can you please investigate and/or report to the developers? If
you are already aware of this problem but do not yet have a fix,
please mark the port BROKEN in the appropriate case, so that users do
not unexpectedly encounter it.
See http://pointyhat.freebsd.org for the full log.
Thanks,
-erwin
----- Forwarded message from User Ports-i386 <ports-i386 at FreeBSD.org> -----
Date: Mon, 23 Mar 2009 00:49:13 GMT
From: User Ports-i386 <ports-i386 at FreeBSD.org>
To: erwin at FreeBSD.org, linimon at FreeBSD.org
Subject: babl-0.0.22_1 failed on i386 8
You can also find this build log at
http://pointyhat.freebsd.org/errorlogs/i386-errorlogs/a.8.20090322220854/babl-0.0.22_1.log
building babl-0.0.22_1 on thunder1.isc.freebsd.org
in directory /usr2/pkgbuild/8/20090322220854/chroot/16
building for: 8.0-CURRENT i386
maintained by: gnome at FreeBSD.org
port directory: /usr/ports/x11/babl
Makefile ident: $FreeBSD: ports/x11/babl/Makefile,v 1.4 2008/10/28 04:13:30 mezz Exp $
build started at Mon Mar 23 00:48:10 UTC 2009
FETCH_DEPENDS=
PATCH_DEPENDS=libtool-1.5.26.tbz
EXTRACT_DEPENDS=
BUILD_DEPENDS=gettext-0.17_1.tbz gmake-3.81_3.tbz libiconv-1.11_1.tbz libtool-1.5.26.tbz pkg-config-0.23_1.tbz
RUN_DEPENDS=pkg-config-0.23_1.tbz
prefixes: LOCALBASE=usr/local X11BASE=usr/local
add_pkg
================================================================
====================<phase 1: make checksum>====================
=> babl-0.0.22.tar.bz2 doesn't seem to exist in /tmp/distfiles/.
=> Attempting to fetch from ftp://freebsd.isc.org/pub/FreeBSD/ports/distfiles/.
babl-0.0.22.tar.bz2 387 kB 2024 kBps
=> MD5 Checksum OK for babl-0.0.22.tar.bz2.
=> SHA256 Checksum OK for babl-0.0.22.tar.bz2.
================================================================
====================<phase 2: make extract>====================
add_pkg
===> Extracting for babl-0.0.22_1
=> MD5 Checksum OK for babl-0.0.22.tar.bz2.
=> SHA256 Checksum OK for babl-0.0.22.tar.bz2.
================================================================
====================<phase 3: make patch>====================
add_pkg libtool-1.5.26.tbz
adding dependencies
pkg_add libtool-1.5.26.tbz
===> Patching for babl-0.0.22_1
===> babl-0.0.22_1 depends on file: /usr/local/bin/libtool - found
Deleting libtool-1.5.26
================================================================
====================<phase 4: make build>====================
add_pkg gettext-0.17_1.tbz gmake-3.81_3.tbz libiconv-1.11_1.tbz libtool-1.5.26.tbz pkg-config-0.23_1.tbz
adding dependencies
pkg_add gettext-0.17_1.tbz
pkg_add gmake-3.81_3.tbz
pkg_add libiconv-1.11_1.tbz
skipping libiconv-1.11_1, already added
pkg_add libtool-1.5.26.tbz
pkg_add pkg-config-0.23_1.tbz
===> babl-0.0.22_1 depends on executable: gmake - found
===> babl-0.0.22_1 depends on file: /usr/local/bin/libtool - found
===> babl-0.0.22_1 depends on executable: pkg-config - found
===> Configuring for babl-0.0.22_1
checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... no
checking for nawk... nawk
checking whether gmake sets $(MAKE)... yes
checking for gcc... cc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for cc option to accept ISO C89... none needed
checking for style of include used by gmake... GNU
checking dependency style of cc... gcc3
checking build system type... i386-portbld-freebsd8.0
checking host system type... i386-portbld-freebsd8.0
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ld used by cc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognize dependent libraries... pass_all
checking how to run the C preprocessor... cc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking whether we are using the GNU C++ compiler... yes
checking whether c++ accepts -g... yes
checking dependency style of c++... gcc3
checking how to run the C++ preprocessor... c++ -E
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether accepts -g... no
checking the maximum length of command line arguments... (cached) 262144
checking command to parse /usr/bin/nm -B output from cc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if cc supports -fno-rtti -fno-exceptions... no
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc static flag -static works... yes
checking if cc supports -c -o file.o... yes
checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... freebsd8.0 ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by c++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the c++ linker (/usr/bin/ld) supports shared libraries... yes
checking for c++ option to produce PIC... -fPIC
checking if c++ PIC flag -fPIC works... yes
checking if c++ static flag -static works... yes
checking if c++ supports -c -o file.o... yes
checking whether the c++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... freebsd8.0 ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking whether to enable maintainer-specific portions of Makefiles... no
checking for ANSI C header files... (cached) yes
checking whether build environment is sane... yes
checking whether cc understands -Wdeclaration-after-statement... yes
checking whether cc understands -Wmissing-prototypes... yes
checking whether cc understands -Wmissing-declarations... yes
checking whether cc understands -Winit-self... yes
checking whether cc understands -Wpointer-arith... yes
checking whether cc understands -Wold-style-definition... yes
checking for inkscape... no
checking for w3m... no
checking for target architecture... i386-portbld-freebsd8.0
checking for some Win32 platform... checking for some Win32 platform... no
checking for native Win32... no
checking whether cc understands -mmmx... yes
checking whether we can compile MMX code... yes
checking whether cc understands -msse... yes
checking whether we can compile SSE code... yes
checking for library containing dlopen... none required
checking for library containing rint... -lm
checking for gettimeofday... yes
checking for rint... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating babl.pc
config.status: creating babl/Makefile
config.status: creating babl/babl-version.h
config.status: creating babl/base/Makefile
config.status: creating docs/Makefile
config.status: creating docs/index-static.html
config.status: creating docs/graphics/Makefile
config.status: creating tests/Makefile
config.status: creating extensions/Makefile
config.status: creating INSTALL
config.status: creating config.h
config.status: executing depfiles commands
===> Building for babl-0.0.22_1
gmake all-recursive
gmake[1]: Entering directory `/work/a/ports/x11/babl/work/babl-0.0.22'
Making all in babl
gmake[2]: Entering directory `/work/a/ports/x11/babl/work/babl-0.0.22/babl'
Making all in base
gmake[3]: Entering directory `/work/a/ports/x11/babl/work/babl-0.0.22/babl/base'
if /bin/sh /work/a/ports/x11/babl/work/gnome-libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../babl -O2 -pipe -fno-strict-aliasing -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT babl-base.lo -MD -MP -MF ".deps/babl-base.Tpo" -c -o babl-base.lo babl-base.c; \
then mv -f ".deps/babl-base.Tpo" ".deps/babl-base.Plo"; else rm -f ".deps/babl-base.Tpo"; exit 1; fi
mkdir .libs
cc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../babl -O2 -pipe -fno-strict-aliasing -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT babl-base.lo -MD -MP -MF .deps/babl-base.Tpo -c babl-base.c -fPIC -DPIC -o .libs/babl-base.o
cc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../babl -O2 -pipe -fno-strict-aliasing -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT babl-base.lo -MD -MP -MF .deps/babl-base.Tpo -c babl-base.c -o babl-base.o >/dev/null 2>&1
if /bin/sh /work/a/ports/x11/babl/work/gnome-libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../babl -O2 -pipe -fno-strict-aliasing -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT formats.lo -MD -MP -MF ".deps/formats.Tpo" -c -o formats.lo formats.c; \
then mv -f ".deps/formats.Tpo" ".deps/formats.Plo"; else rm -f ".deps/formats.Tpo"; exit 1; fi
cc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../babl -O2 -pipe -fno-strict-aliasing -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT formats.lo -MD -MP -MF .deps/formats.Tpo -c formats.c -fPIC -DPIC -o .libs/formats.o
cc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../babl -O2 -pipe -fno-strict-aliasing -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT formats.lo -MD -MP -MF .deps/formats.Tpo -c formats.c -o formats.o >/dev/null 2>&1
if /bin/sh /work/a/ports/x11/babl/work/gnome-libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../babl -O2 -pipe -fno-strict-aliasing -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT type-float.lo -MD -MP -MF ".deps/type-float.Tpo" -c -o type-float.lo type-float.c; \
then mv -f ".deps/type-float.Tpo" ".deps/type-float.Plo"; else rm -f ".deps/type-float.Tpo"; exit 1; fi
cc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../babl -O2 -pipe -fno-strict-aliasing -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT type-float.lo -MD -MP -MF .deps/type-float.Tpo -c type-float.c -fPIC -DPIC -o .libs/type-float.o
cc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../babl -O2 -pipe -fno-strict-aliasing -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT type-float.lo -MD -MP -MF .deps/type-float.Tpo -c type-float.c -o type-float.o >/dev/null 2>&1
if /bin/sh /work/a/ports/x11/babl/work/gnome-libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../babl -O2 -pipe -fno-strict-aliasing -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT type-u8.lo -MD -MP -MF ".deps/type-u8.Tpo" -c -o type-u8.lo type-u8.c; \
then mv -f ".deps/type-u8.Tpo" ".deps/type-u8.Plo"; else rm -f ".deps/type-u8.Tpo"; exit 1; fi
cc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../babl -O2 -pipe -fno-strict-aliasing -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT type-u8.lo -MD -MP -MF .deps/type-u8.Tpo -c type-u8.c -fPIC -DPIC -o .libs/type-u8.o
../../babl/babl-hash-table.h:56: error: nested function 'babl_hash_table_size' declared but never defined
../../babl/babl-hash-table.h:53: error: nested function 'babl_hash_by_int' declared but never defined
../../babl/babl-hash-table.h:49: error: nested function 'babl_hash_by_str' declared but never defined
../../babl/babl-list.h:65: error: nested function 'babl_list_copy' declared but never defined
../../babl/babl-list.h:61: error: nested function 'babl_list_get_last' declared but never defined
../../babl/babl-list.h:58: error: nested function 'babl_list_get_first' declared but never defined
../../babl/babl-list.h:55: error: nested function 'babl_list_remove_last' declared but never defined
../../babl/babl-list.h:52: error: nested function 'babl_list_insert_last' declared but never defined
gmake[3]: *** [type-u8.lo] Error 1
gmake[3]: Leaving directory `/work/a/ports/x11/babl/work/babl-0.0.22/babl/base'
gmake[2]: *** [all-recursive] Error 1
gmake[2]: Leaving directory `/work/a/ports/x11/babl/work/babl-0.0.22/babl'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory `/work/a/ports/x11/babl/work/babl-0.0.22'
gmake: *** [all] Error 2
================================================================
====================<phase 5: make test>====================
make: don't know how to make regression-test(continuing)
================================================================
====================<phase 6: make install>====================
add_pkg pkg-config-0.23_1.tbz
adding dependencies
pkg_add pkg-config-0.23_1.tbz
skipping pkg-config-0.23_1, already added
===> Installing for babl-0.0.22_1
===> babl-0.0.22_1 depends on executable: pkg-config - found
===> Generating temporary packing list
===> Checking if x11/babl already installed
Making install in babl
gmake[1]: Entering directory `/work/a/ports/x11/babl/work/babl-0.0.22/babl'
Making install in base
gmake[2]: Entering directory `/work/a/ports/x11/babl/work/babl-0.0.22/babl/base'
if /bin/sh /work/a/ports/x11/babl/work/gnome-libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../babl -O2 -pipe -fno-strict-aliasing -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT type-u8.lo -MD -MP -MF ".deps/type-u8.Tpo" -c -o type-u8.lo type-u8.c; \
then mv -f ".deps/type-u8.Tpo" ".deps/type-u8.Plo"; else rm -f ".deps/type-u8.Tpo"; exit 1; fi
cc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../babl -O2 -pipe -fno-strict-aliasing -Wall -Wdeclaration-after-statement -Wmissing-prototypes -Wmissing-declarations -Winit-self -Wpointer-arith -Wold-style-definition -MT type-u8.lo -MD -MP -MF .deps/type-u8.Tpo -c type-u8.c -fPIC -DPIC -o .libs/type-u8.o
../../babl/babl-hash-table.h:56: error: nested function 'babl_hash_table_size' declared but never defined
../../babl/babl-hash-table.h:53: error: nested function 'babl_hash_by_int' declared but never defined
../../babl/babl-hash-table.h:49: error: nested function 'babl_hash_by_str' declared but never defined
../../babl/babl-list.h:65: error: nested function 'babl_list_copy' declared but never defined
../../babl/babl-list.h:61: error: nested function 'babl_list_get_last' declared but never defined
../../babl/babl-list.h:58: error: nested function 'babl_list_get_first' declared but never defined
../../babl/babl-list.h:55: error: nested function 'babl_list_remove_last' declared but never defined
../../babl/babl-list.h:52: error: nested function 'babl_list_insert_last' declared but never defined
gmake[2]: *** [type-u8.lo] Error 1
gmake[2]: Leaving directory `/work/a/ports/x11/babl/work/babl-0.0.22/babl/base'
gmake[1]: *** [install-recursive] Error 1
gmake[1]: Leaving directory `/work/a/ports/x11/babl/work/babl-0.0.22/babl'
gmake: *** [install-recursive] Error 1
*** Error code 2
Stop in /a/ports/x11/babl.
================================================================
build of /usr/ports/x11/babl ended at Mon Mar 23 00:49:09 UTC 2009
----- End forwarded message -----
--
Erwin Lansing http://droso.org
Prediction is very difficult erwin at FreeBSD.org
especially about the future erwin at aauug.dk
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20090323/c953ab8c/attachment.pgp
More information about the freebsd-gnome
mailing list