I need some help if possible (ORBit)

[Jean-Yves Lignier]

Hello,

I encountered some problems while trying to compile the sources of 
"mozilla-firebird".
It seems that it comes from bus CORBA.
In this e-mail, I am enclosing the logs of compilation.
I thank you by advance for the assistance which you will want to bring 
to me well.

Jean-Yves
-------------- next part --------------
===>  Extracting for mozilla-firebird-0.6.1_1
>> Checksum OK for MozillaFirebird-source-0.6.1.tar.bz2.

Extracting source (this takes a while) ...

===>  Patching for mozilla-firebird-0.6.1_1
===>  Applying FreeBSD patches for mozilla-firebird-0.6.1_1
===>   mozilla-firebird-0.6.1_1 depends on executable: zip - found
===>   mozilla-firebird-0.6.1_1 depends on executable: freetype-config - found
===>   mozilla-firebird-0.6.1_1 depends on executable: gmake - found
===>   mozilla-firebird-0.6.1_1 depends on executable: pkg-config - found
===>   mozilla-firebird-0.6.1_1 depends on shared library: jpeg.9 - found
===>   mozilla-firebird-0.6.1_1 depends on shared library: png.5 - found
===>   mozilla-firebird-0.6.1_1 depends on shared library: mng.1 - found
===>   mozilla-firebird-0.6.1_1 depends on shared library: freetype.9 - found
===>   mozilla-firebird-0.6.1_1 depends on shared library: iconv.3 - found
===>   mozilla-firebird-0.6.1_1 depends on shared library: nspr4.1 - found
===>   mozilla-firebird-0.6.1_1 depends on shared library: Xft.2 - found
===>   mozilla-firebird-0.6.1_1 depends on shared library: X11.6 - found
===>   mozilla-firebird-0.6.1_1 depends on shared library: glib12.3 - found
===>   mozilla-firebird-0.6.1_1 depends on shared library: gtk12.2 - found
===>   mozilla-firebird-0.6.1_1 depends on shared library: ORBit.2 - not found
===>    Verifying install for ORBit.2 in /usr/ports/devel/ORBit
===>  Extracting for ORBit-0.5.17_1
>> Checksum OK for gnome/ORBit-0.5.17.tar.bz2.
===>  Patching for ORBit-0.5.17_1
===>  Applying FreeBSD patches for ORBit-0.5.17_1
===>   ORBit-0.5.17_1 depends on executable: gmake - found
===>   ORBit-0.5.17_1 depends on file: /usr/local/libexec/libtool13/libtool - found
===>   ORBit-0.5.17_1 depends on executable: pkg-config - found
===>   ORBit-0.5.17_1 depends on shared library: intl.5 - found
===>   ORBit-0.5.17_1 depends on shared library: glib12.3 - found
===>  Configuring for ORBit-0.5.17_1
checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
checking whether build environment is sane... yes
checking whether gmake sets ${MAKE}... yes
checking for working aclocal... missing
checking for working autoconf... missing
checking for working automake... missing
checking for working autoheader... missing
checking for working makeinfo... found
checking build system type... i386-portbld-freebsd4.9
checking host system type... i386-portbld-freebsd4.9
checking for gcc... cc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for executable suffix... 
checking for object suffix... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for ld used by GCC... /usr/libexec/elf/ld
checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
checking for /usr/libexec/elf/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependant libraries... pass_all
checking command to parse /usr/bin/nm -B output... ok
checking how to run the C preprocessor... cc -E
checking for dlfcn.h... yes
checking for ranlib... ranlib
checking for strip... strip
checking for objdir... .libs
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc static flag -static works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... yes
checking if cc supports -fno-rtti -fno-exceptions... yes
checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... freebsd4.9 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether -lc should be explicitly linked in... yes
creating libtool
checking host system type... i386-unknown-freebsd4.9
checking for ranlib... ranlib
checking whether we are using GNU C... yes
checking for object suffix... o
checking for executable suffix... no
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... yes
checking if cc supports -fno-rtti -fno-exceptions ... yes
checking if cc static flag -static works... -static
checking whether ln -s works... yes
checking for ld used by GCC... /usr/libexec/elf/ld
checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
checking for BSD-compatible nm... /usr/bin/nm -B
checking command to parse /usr/bin/nm -B output... ok
checking how to hardcode library paths into programs... immediate
checking for /usr/libexec/elf/ld option to reload object files... -r
checking dynamic linker characteristics... freebsd4.9 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for objdir... .libs
creating libtool
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) cc
checking whether we are using the GNU C compiler... (cached) yes
checking whether cc accepts -g... (cached) yes
checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
checking for indentation command to pipe generated c-files through... cat
checking for glib-config... /usr/local/bin/glib12-config
checking for GLIB - version >= 1.2.1... yes
checking for bison... no
checking for byacc... byacc
checking for flex... flex
checking for flex... (cached) flex
checking for yywrap in -lfl... yes
checking lex output file root... lex.yy
checking whether yytext is a pointer... yes
checking for mawk... no
checking for gawk... no
checking for nawk... nawk
checking for ANSI C header files... yes
checking for fcntl.h... yes
checking for unistd.h... yes
checking for sys/endian.h... yes
checking for endian.h... no
checking for machine/endian.h... yes
checking for sys/machine.h... no
checking for sys/isa_defs.h... no
checking for sys/poll.h... yes
checking for stddef.h... yes
checking for wchar.h... yes
checking for wcstr.h... no
checking for wctype.h... yes
checking for machine/types.h... yes
checking for tcpd.h... yes
checking for cc option to accept ANSI C... none needed
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... no
checking for unistd.h... (cached) yes
checking for size_t... yes
checking for vprintf... yes
checking for _doprnt... no
checking for poll... yes
checking for basename... yes
checking for socket... yes
checking for gethostbyname... yes
checking for socklen_t... yes
checking "whether to use TCP wrappers"... yes
checking for inet_aton... yes
checking whether byte ordering is bigendian... no
checking how many vectors writev is capable to handle... 
1024
checking alignment of CORBA_short... 2
checking alignment of CORBA_long... 4
checking alignment of CORBA_unsigned_short... 2
checking alignment of CORBA_unsigned_long... 4
checking alignment of CORBA_float... 4
checking alignment of CORBA_double... 4
checking alignment of CORBA_char... 1
checking alignment of CORBA_boolean... 1
checking alignment of CORBA_octet... 1
checking alignment of CORBA_long_double... 4
checking alignment of CORBA_wchar... 2
checking alignment of CORBA_long_long... 4
checking alignment of CORBA_unsigned_long_long... 4
checking alignment of CORBA_struct... 1
checking alignment of CORBA_pointer... 4
configure: creating ./config.status
config.status: creating Makefile
config.status: creating orbit-config
config.status: creating src/Makefile
config.status: creating src/ORBitutil/Makefile
config.status: creating src/ORBitutil/orbit-os-config.h
config.status: creating src/IIOP/Makefile
config.status: creating src/orb/orbit.h
config.status: creating src/orb/Makefile
config.status: creating src/orbit-idl-compiler/Makefile
config.status: creating src/orbit-idl-compiler/backends/Makefile
config.status: creating src/orbit-idl-compiler/backends/c/Makefile
config.status: creating src/services/Makefile
config.status: creating src/services/name/Makefile
config.status: creating src/services/event/Makefile
config.status: creating src/daemons/Makefile
config.status: creating src/daemons/interface_repository/Makefile
config.status: creating test/Makefile
config.status: creating test/idl/Makefile
config.status: creating test/test-poa/Makefile
config.status: creating test/everything/Makefile
config.status: creating ORBit.pc
config.status: creating ORBit.spec
config.status: creating config.h
configure: configuring in libIDL
configure: running /bin/sh './configure'  --disable-indent --prefix=/usr/local --build=i386-portbld-freebsd4.9 LDFLAGS=-L/usr/local/lib 'CFLAGS=-O -pipe ' CPPFLAGS=-I/usr/local/include build_alias=i386-portbld-freebsd4.9 CC=cc --cache-file=/dev/null --srcdir=.
checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
checking whether build environment is sane... yes
checking whether gmake sets ${MAKE}... yes
checking for working aclocal... missing
checking for working autoconf... missing
checking for working automake... missing
checking for working autoheader... missing
checking for working makeinfo... found
checking for gcc... cc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for executable suffix... 
checking for object suffix... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for strerror in -lcposix... no
checking for gcc... (cached) cc
checking whether we are using the GNU C compiler... (cached) yes
checking whether cc accepts -g... (cached) yes
checking how to run the C preprocessor... cc -E
checking if C preprocessor likes IDL... yes
checking if C preprocessor can read from stdin... yes
checking how to ignore standard include path... 
checking for flex... flex
checking for flex... (cached) flex
checking for yywrap in -lfl... yes
checking lex output file root... lex.yy
checking whether yytext is a pointer... yes
checking for bison... no
checking for byacc... byacc
checking build system type... i386-portbld-freebsd4.9
checking host system type... i386-portbld-freebsd4.9
checking for ld used by GCC... /usr/libexec/elf/ld
checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
checking for /usr/libexec/elf/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependant libraries... pass_all
checking command to parse /usr/bin/nm -B output... ok
checking for dlfcn.h... yes
checking for ranlib... ranlib
checking for strip... strip
checking for objdir... .libs
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc static flag -static works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... yes
checking if cc supports -fno-rtti -fno-exceptions... yes
checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... freebsd4.9 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether -lc should be explicitly linked in... yes
creating libtool
checking host system type... i386-unknown-freebsd4.9
checking for ranlib... ranlib
checking whether we are using GNU C... yes
checking for object suffix... o
checking for executable suffix... no
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... yes
checking if cc supports -fno-rtti -fno-exceptions ... yes
checking if cc static flag -static works... -static
checking whether ln -s works... yes
checking for ld used by GCC... /usr/libexec/elf/ld
checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
checking for BSD-compatible nm... /usr/bin/nm -B
checking command to parse /usr/bin/nm -B output... ok
checking how to hardcode library paths into programs... immediate
checking for /usr/libexec/elf/ld option to reload object files... -r
checking dynamic linker characteristics... freebsd4.9 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for objdir... .libs
creating libtool
checking whether to enable maintainer-specific portions of Makefiles... no
checking for glib-config... yes
checking for glib-config... /usr/local/bin/glib12-config
checking for GLIB - version >= 1.2.0... yes
checking for ANSI C header files... yes
checking for stddef.h... yes
checking for wchar.h... yes
checking for wcstr.h... no
configure: creating ./config.status
config.status: creating Makefile
config.status: creating Makefile.msc
config.status: creating libIDL-config
config.status: creating libIDL.m4
config.status: creating libIDL.spec
config.status: creating libIDL.pc
config.status: creating IDL.h.new
IDL.h is unchanged

libIDL 0.6.8 configuration complete

  Flex installed: yes
  C Preprocessor: "cc -E"
  Standard input supported.

configure: configuring in popt
configure: running /bin/sh './configure'  --disable-indent --prefix=/usr/local --build=i386-portbld-freebsd4.9 LDFLAGS=-L/usr/local/lib 'CFLAGS=-O -pipe ' CPPFLAGS=-I/usr/local/include build_alias=i386-portbld-freebsd4.9 CC=cc --cache-file=/dev/null --srcdir=.
checking build system type... i386-portbld-freebsd4.9
checking host system type... i386-portbld-freebsd4.9
checking target system type... i386-portbld-freebsd4.9
checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
checking whether build environment is sane... yes
checking whether gmake sets ${MAKE}... yes
checking for working aclocal... missing
checking for working autoconf... missing
checking for working automake... missing
checking for working autoheader... missing
checking for working makeinfo... found
checking for gcc... cc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for executable suffix... 
checking for object suffix... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for strerror in -lcposix... no
checking for gcc... (cached) cc
checking whether we are using the GNU C compiler... (cached) yes
checking whether cc accepts -g... (cached) yes
checking how to run the C preprocessor... cc -E
checking whether cc needs -traditional... no
checking for cc option to accept ANSI C... none needed
checking for function prototypes... yes
checking for ld used by GCC... /usr/libexec/elf/ld
checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
checking for /usr/libexec/elf/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependant libraries... pass_all
checking command to parse /usr/bin/nm -B output... ok
checking for dlfcn.h... yes
checking for ranlib... ranlib
checking for strip... strip
checking for objdir... .libs
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc static flag -static works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... yes
checking if cc supports -fno-rtti -fno-exceptions... yes
checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... freebsd4.9 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
creating libtool
checking host system type... i386-unknown-freebsd4.9
checking for ranlib... ranlib
checking whether we are using GNU C... yes
checking for object suffix... o
checking for executable suffix... no
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... yes
checking if cc supports -fno-rtti -fno-exceptions ... yes
checking if cc static flag -static works... -static
checking whether ln -s works... yes
checking for ld used by GCC... /usr/libexec/elf/ld
checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
checking for BSD-compatible nm... /usr/bin/nm -B
checking command to parse /usr/bin/nm -B output... ok
checking how to hardcode library paths into programs... immediate
checking for /usr/libexec/elf/ld option to reload object files... -r
checking dynamic linker characteristics... freebsd4.9 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for objdir... .libs
creating libtool
checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
checking for alloca.h... no
checking for libintl.h... yes
checking for mcheck.h... no
checking for unistd.h... yes
checking for /usr/ucblib in LIBS... no
checking for GNU xgettext... yes
checking for strerror... yes
checking for mtrace... no
checking for setreuid... yes
checking for ranlib... (cached) ranlib
checking for cc option to accept ANSI C... none needed
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... no
checking for unistd.h... (cached) yes
checking for off_t... yes
checking for size_t... yes
checking for working alloca.h... no
checking for alloca... yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for getpagesize... yes
checking for working mmap... yes
checking whether we are using the GNU C Library 2.1 or newer... no
checking for argz.h... no
checking for limits.h... yes
checking for locale.h... yes
checking for nl_types.h... yes
checking for malloc.h... yes
checking for stddef.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/param.h... yes
checking for feof_unlocked... no
checking for fgets_unlocked... no
checking for getcwd... yes
checking for getegid... yes
checking for geteuid... yes
checking for getgid... yes
checking for getuid... yes
checking for mempcpy... no
checking for munmap... yes
checking for putenv... yes
checking for setenv... yes
checking for setlocale... yes
checking for stpcpy... no
checking for strchr... yes
checking for strcasecmp... yes
checking for strdup... yes
checking for strtoul... yes
checking for tsearch... yes
checking for __argz_count... no
checking for __argz_stringify... no
checking for __argz_next... no
checking for iconv... yes
checking for iconv declaration... 
         extern size_t iconv (iconv_t cd, const char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking for nl_langinfo and CODESET... yes
checking for LC_MESSAGES... yes
checking whether NLS is requested... yes
checking whether included gettext is requested... no
checking for libintl.h... (cached) yes
checking for GNU gettext in libc... no
checking for GNU gettext in libintl... yes
checking for dcgettext... yes
checking for msgfmt... /usr/local/bin/msgfmt
checking for gmsgfmt... /usr/local/bin/msgfmt
checking for xgettext... /usr/local/bin/xgettext
checking for bison... no
checking for catalogs to be installed...  da cs el gl ro sk uk wa zh_CN.GB2312
configure: creating ./config.status
config.status: creating Makefile
config.status: creating intl/Makefile
config.status: creating po/Makefile.in
config.status: creating config.h
===>  Building for ORBit-0.5.17_1
gmake  all-recursive
gmake[1]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17'
Making all in popt
gmake[2]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
gmake  all-recursive
gmake[3]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
Making all in intl
gmake[4]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt/intl'
gmake[4]: Nothing to be done for `all'.
gmake[4]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt/intl'
Making all in po
gmake[4]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt/po'
( if test 'x.' != 'x.'; then \
    posrcprefix='../'; \
  else \
    posrcprefix="../"; \
  fi; \
  rm -f POTFILES-t POTFILES \
    && (sed -e '/^#/d' -e '/^[ 	]*$/d' \
	    -e "s at .*@	$posrcprefix& \\\\@" < ./POTFILES.in \
	| sed -e '$s/\\$//') > POTFILES-t \
    && chmod a-w POTFILES-t \
    && mv POTFILES-t POTFILES )
gmake[4]: Nothing to be done for `all'.
gmake[4]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt/po'
gmake[4]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
/bin/sh ./libtool --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I. -I.  -I/usr/local/include  -Wall -O -pipe  -c popt.c
gmake[4]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
gmake[3]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
gmake[2]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
gmake[1]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17'
*** Error code 2

Stop in /usr/ports/devel/ORBit.
*** Error code 1

Stop in /usr/ports/www/mozilla-firebird.
-------------- next part --------------
===>  Extracting for ORBit-0.5.17_1
>> Checksum OK for gnome/ORBit-0.5.17.tar.bz2.
===>  Patching for ORBit-0.5.17_1
===>  Applying FreeBSD patches for ORBit-0.5.17_1
===>   ORBit-0.5.17_1 depends on executable: gmake - found
===>   ORBit-0.5.17_1 depends on file: /usr/local/libexec/libtool13/libtool - found
===>   ORBit-0.5.17_1 depends on executable: pkg-config - found
===>   ORBit-0.5.17_1 depends on shared library: intl.5 - found
===>   ORBit-0.5.17_1 depends on shared library: glib12.3 - found
===>  Configuring for ORBit-0.5.17_1
checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
checking whether build environment is sane... yes
checking whether gmake sets ${MAKE}... yes
checking for working aclocal... missing
checking for working autoconf... missing
checking for working automake... missing
checking for working autoheader... missing
checking for working makeinfo... found
checking build system type... i386-portbld-freebsd4.9
checking host system type... i386-portbld-freebsd4.9
checking for gcc... cc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for executable suffix... 
checking for object suffix... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for ld used by GCC... /usr/libexec/elf/ld
checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
checking for /usr/libexec/elf/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependant libraries... pass_all
checking command to parse /usr/bin/nm -B output... ok
checking how to run the C preprocessor... cc -E
checking for dlfcn.h... yes
checking for ranlib... ranlib
checking for strip... strip
checking for objdir... .libs
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc static flag -static works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... yes
checking if cc supports -fno-rtti -fno-exceptions... yes
checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... freebsd4.9 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether -lc should be explicitly linked in... yes
creating libtool
checking host system type... i386-unknown-freebsd4.9
checking for ranlib... ranlib
checking whether we are using GNU C... yes
checking for object suffix... o
checking for executable suffix... no
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... yes
checking if cc supports -fno-rtti -fno-exceptions ... yes
checking if cc static flag -static works... -static
checking whether ln -s works... yes
checking for ld used by GCC... /usr/libexec/elf/ld
checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
checking for BSD-compatible nm... /usr/bin/nm -B
checking command to parse /usr/bin/nm -B output... ok
checking how to hardcode library paths into programs... immediate
checking for /usr/libexec/elf/ld option to reload object files... -r
checking dynamic linker characteristics... freebsd4.9 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for objdir... .libs
creating libtool
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) cc
checking whether we are using the GNU C compiler... (cached) yes
checking whether cc accepts -g... (cached) yes
checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
checking for indentation command to pipe generated c-files through... cat
checking for glib-config... /usr/local/bin/glib12-config
checking for GLIB - version >= 1.2.1... yes
checking for bison... no
checking for byacc... byacc
checking for flex... flex
checking for flex... (cached) flex
checking for yywrap in -lfl... yes
checking lex output file root... lex.yy
checking whether yytext is a pointer... yes
checking for mawk... no
checking for gawk... no
checking for nawk... nawk
checking for ANSI C header files... yes
checking for fcntl.h... yes
checking for unistd.h... yes
checking for sys/endian.h... yes
checking for endian.h... no
checking for machine/endian.h... yes
checking for sys/machine.h... no
checking for sys/isa_defs.h... no
checking for sys/poll.h... yes
checking for stddef.h... yes
checking for wchar.h... yes
checking for wcstr.h... no
checking for wctype.h... yes
checking for machine/types.h... yes
checking for tcpd.h... yes
checking for cc option to accept ANSI C... none needed
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... no
checking for unistd.h... (cached) yes
checking for size_t... yes
checking for vprintf... yes
checking for _doprnt... no
checking for poll... yes
checking for basename... yes
checking for socket... yes
checking for gethostbyname... yes
checking for socklen_t... yes
checking "whether to use TCP wrappers"... yes
checking for inet_aton... yes
checking whether byte ordering is bigendian... no
checking how many vectors writev is capable to handle... 
1024
checking alignment of CORBA_short... 2
checking alignment of CORBA_long... 4
checking alignment of CORBA_unsigned_short... 2
checking alignment of CORBA_unsigned_long... 4
checking alignment of CORBA_float... 4
checking alignment of CORBA_double... 4
checking alignment of CORBA_char... 1
checking alignment of CORBA_boolean... 1
checking alignment of CORBA_octet... 1
checking alignment of CORBA_long_double... 4
checking alignment of CORBA_wchar... 2
checking alignment of CORBA_long_long... 4
checking alignment of CORBA_unsigned_long_long... 4
checking alignment of CORBA_struct... 1
checking alignment of CORBA_pointer... 4
configure: creating ./config.status
config.status: creating Makefile
config.status: creating orbit-config
config.status: creating src/Makefile
config.status: creating src/ORBitutil/Makefile
config.status: creating src/ORBitutil/orbit-os-config.h
config.status: creating src/IIOP/Makefile
config.status: creating src/orb/orbit.h
config.status: creating src/orb/Makefile
config.status: creating src/orbit-idl-compiler/Makefile
config.status: creating src/orbit-idl-compiler/backends/Makefile
config.status: creating src/orbit-idl-compiler/backends/c/Makefile
config.status: creating src/services/Makefile
config.status: creating src/services/name/Makefile
config.status: creating src/services/event/Makefile
config.status: creating src/daemons/Makefile
config.status: creating src/daemons/interface_repository/Makefile
config.status: creating test/Makefile
config.status: creating test/idl/Makefile
config.status: creating test/test-poa/Makefile
config.status: creating test/everything/Makefile
config.status: creating ORBit.pc
config.status: creating ORBit.spec
config.status: creating config.h
configure: configuring in libIDL
configure: running /bin/sh './configure'  --disable-indent --prefix=/usr/local --build=i386-portbld-freebsd4.9 LDFLAGS=-L/usr/local/lib 'CFLAGS=-O -pipe ' CPPFLAGS=-I/usr/local/include build_alias=i386-portbld-freebsd4.9 CC=cc --cache-file=/dev/null --srcdir=.
checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
checking whether build environment is sane... yes
checking whether gmake sets ${MAKE}... yes
checking for working aclocal... missing
checking for working autoconf... missing
checking for working automake... missing
checking for working autoheader... missing
checking for working makeinfo... found
checking for gcc... cc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for executable suffix... 
checking for object suffix... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for strerror in -lcposix... no
checking for gcc... (cached) cc
checking whether we are using the GNU C compiler... (cached) yes
checking whether cc accepts -g... (cached) yes
checking how to run the C preprocessor... cc -E
checking if C preprocessor likes IDL... yes
checking if C preprocessor can read from stdin... yes
checking how to ignore standard include path... 
checking for flex... flex
checking for flex... (cached) flex
checking for yywrap in -lfl... yes
checking lex output file root... lex.yy
checking whether yytext is a pointer... yes
checking for bison... no
checking for byacc... byacc
checking build system type... i386-portbld-freebsd4.9
checking host system type... i386-portbld-freebsd4.9
checking for ld used by GCC... /usr/libexec/elf/ld
checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
checking for /usr/libexec/elf/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependant libraries... pass_all
checking command to parse /usr/bin/nm -B output... ok
checking for dlfcn.h... yes
checking for ranlib... ranlib
checking for strip... strip
checking for objdir... .libs
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc static flag -static works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... yes
checking if cc supports -fno-rtti -fno-exceptions... yes
checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... freebsd4.9 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether -lc should be explicitly linked in... yes
creating libtool
checking host system type... i386-unknown-freebsd4.9
checking for ranlib... ranlib
checking whether we are using GNU C... yes
checking for object suffix... o
checking for executable suffix... no
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... yes
checking if cc supports -fno-rtti -fno-exceptions ... yes
checking if cc static flag -static works... -static
checking whether ln -s works... yes
checking for ld used by GCC... /usr/libexec/elf/ld
checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
checking for BSD-compatible nm... /usr/bin/nm -B
checking command to parse /usr/bin/nm -B output... ok
checking how to hardcode library paths into programs... immediate
checking for /usr/libexec/elf/ld option to reload object files... -r
checking dynamic linker characteristics... freebsd4.9 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for objdir... .libs
creating libtool
checking whether to enable maintainer-specific portions of Makefiles... no
checking for glib-config... yes
checking for glib-config... /usr/local/bin/glib12-config
checking for GLIB - version >= 1.2.0... yes
checking for ANSI C header files... yes
checking for stddef.h... yes
checking for wchar.h... yes
checking for wcstr.h... no
configure: creating ./config.status
config.status: creating Makefile
config.status: creating Makefile.msc
config.status: creating libIDL-config
config.status: creating libIDL.m4
config.status: creating libIDL.spec
config.status: creating libIDL.pc
config.status: creating IDL.h.new
IDL.h is unchanged

libIDL 0.6.8 configuration complete

  Flex installed: yes
  C Preprocessor: "cc -E"
  Standard input supported.

configure: configuring in popt
configure: running /bin/sh './configure'  --disable-indent --prefix=/usr/local --build=i386-portbld-freebsd4.9 LDFLAGS=-L/usr/local/lib 'CFLAGS=-O -pipe ' CPPFLAGS=-I/usr/local/include build_alias=i386-portbld-freebsd4.9 CC=cc --cache-file=/dev/null --srcdir=.
checking build system type... i386-portbld-freebsd4.9
checking host system type... i386-portbld-freebsd4.9
checking target system type... i386-portbld-freebsd4.9
checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
checking whether build environment is sane... yes
checking whether gmake sets ${MAKE}... yes
checking for working aclocal... missing
checking for working autoconf... missing
checking for working automake... missing
checking for working autoheader... missing
checking for working makeinfo... found
checking for gcc... cc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for executable suffix... 
checking for object suffix... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for strerror in -lcposix... no
checking for gcc... (cached) cc
checking whether we are using the GNU C compiler... (cached) yes
checking whether cc accepts -g... (cached) yes
checking how to run the C preprocessor... cc -E
checking whether cc needs -traditional... no
checking for cc option to accept ANSI C... none needed
checking for function prototypes... yes
checking for ld used by GCC... /usr/libexec/elf/ld
checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
checking for /usr/libexec/elf/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependant libraries... pass_all
checking command to parse /usr/bin/nm -B output... ok
checking for dlfcn.h... yes
checking for ranlib... ranlib
checking for strip... strip
checking for objdir... .libs
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc static flag -static works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... yes
checking if cc supports -fno-rtti -fno-exceptions... yes
checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... freebsd4.9 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
creating libtool
checking host system type... i386-unknown-freebsd4.9
checking for ranlib... ranlib
checking whether we are using GNU C... yes
checking for object suffix... o
checking for executable suffix... no
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... yes
checking if cc supports -fno-rtti -fno-exceptions ... yes
checking if cc static flag -static works... -static
checking whether ln -s works... yes
checking for ld used by GCC... /usr/libexec/elf/ld
checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes
checking for BSD-compatible nm... /usr/bin/nm -B
checking command to parse /usr/bin/nm -B output... ok
checking how to hardcode library paths into programs... immediate
checking for /usr/libexec/elf/ld option to reload object files... -r
checking dynamic linker characteristics... freebsd4.9 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for objdir... .libs
creating libtool
checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
checking for alloca.h... no
checking for libintl.h... yes
checking for mcheck.h... no
checking for unistd.h... yes
checking for /usr/ucblib in LIBS... no
checking for GNU xgettext... yes
checking for strerror... yes
checking for mtrace... no
checking for setreuid... yes
checking for ranlib... (cached) ranlib
checking for cc option to accept ANSI C... none needed
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... no
checking for unistd.h... (cached) yes
checking for off_t... yes
checking for size_t... yes
checking for working alloca.h... no
checking for alloca... yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for getpagesize... yes
checking for working mmap... yes
checking whether we are using the GNU C Library 2.1 or newer... no
checking for argz.h... no
checking for limits.h... yes
checking for locale.h... yes
checking for nl_types.h... yes
checking for malloc.h... yes
checking for stddef.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/param.h... yes
checking for feof_unlocked... no
checking for fgets_unlocked... no
checking for getcwd... yes
checking for getegid... yes
checking for geteuid... yes
checking for getgid... yes
checking for getuid... yes
checking for mempcpy... no
checking for munmap... yes
checking for putenv... yes
checking for setenv... yes
checking for setlocale... yes
checking for stpcpy... no
checking for strchr... yes
checking for strcasecmp... yes
checking for strdup... yes
checking for strtoul... yes
checking for tsearch... yes
checking for __argz_count... no
checking for __argz_stringify... no
checking for __argz_next... no
checking for iconv... yes
checking for iconv declaration... 
         extern size_t iconv (iconv_t cd, const char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking for nl_langinfo and CODESET... yes
checking for LC_MESSAGES... yes
checking whether NLS is requested... yes
checking whether included gettext is requested... no
checking for libintl.h... (cached) yes
checking for GNU gettext in libc... no
checking for GNU gettext in libintl... yes
checking for dcgettext... yes
checking for msgfmt... /usr/local/bin/msgfmt
checking for gmsgfmt... /usr/local/bin/msgfmt
checking for xgettext... /usr/local/bin/xgettext
checking for bison... no
checking for catalogs to be installed...  da cs el gl ro sk uk wa zh_CN.GB2312
configure: creating ./config.status
config.status: creating Makefile
config.status: creating intl/Makefile
config.status: creating po/Makefile.in
config.status: creating config.h
===>  Building for ORBit-0.5.17_1
gmake  all-recursive
gmake[1]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17'
Making all in popt
gmake[2]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
gmake  all-recursive
gmake[3]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
Making all in intl
gmake[4]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt/intl'
gmake[4]: Nothing to be done for `all'.
gmake[4]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt/intl'
Making all in po
gmake[4]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt/po'
( if test 'x.' != 'x.'; then \
    posrcprefix='../'; \
  else \
    posrcprefix="../"; \
  fi; \
  rm -f POTFILES-t POTFILES \
    && (sed -e '/^#/d' -e '/^[ 	]*$/d' \
	    -e "s at .*@	$posrcprefix& \\\\@" < ./POTFILES.in \
	| sed -e '$s/\\$//') > POTFILES-t \
    && chmod a-w POTFILES-t \
    && mv POTFILES-t POTFILES )
gmake[4]: Nothing to be done for `all'.
gmake[4]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt/po'
gmake[4]: Entering directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
/bin/sh ./libtool --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I. -I.  -I/usr/local/include  -Wall -O -pipe  -c popt.c
gmake[4]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
gmake[3]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
gmake[2]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17/popt'
gmake[1]: Leaving directory `/usr/ports/devel/ORBit/work/ORBit-0.5.17'
*** Error code 2

Stop in /usr/ports/devel/ORBit.