FileRoller Install stops
Joe Marcus Clarke
marcus at marcuscom.com
Sat Apr 5 18:38:15 PST 2003
On Sat, 2003-04-05 at 21:36, Joe Mom wrote:
> Doesn't look like that did anything.
Then you didn't do it right. That command should run for a pretty long
time.
Joe
>
> It appears all is almost lost, even Joe has run out of ideas :)
>
>
> -----------------------
> Joe Mom
> "Drain us of life and cleanse the mess"
> MuDvAyNe
> -----------------------
>
> -----Original Message-----
> From: Joe Marcus Clarke [mailto:marcus at marcuscom.com]
> Sent: Saturday, April 05, 2003 9:02 PM
> To: Joe Mom
> Cc: freebsd-gnome at freebsd.org
> Subject: RE: FileRoller Install stops
>
> On Sat, 2003-04-05 at 20:13, Joe Mom wrote:
> > Here is what I get while trying to install from the ports tree.
>
> You should run portupgrade -rf pkgconfig. This will force a rebuild of
> all GNOME bits. That should clear up these errors.
>
> Joe
>
> >
> >
> > /usr/libexec/elf/ld: warning: libgnomecanvas-2.so.0, needed by
> > /usr/X11R6/lib/libgnomeui-2.so, may conflict with
> > libgnomecanvas-2.so.200
> > /usr/libexec/elf/ld: warning: libpangoft2-1.0.so.0, needed by
> > /usr/X11R6/lib/libbonoboui-2.so, may conflict with
> > libpangoft2-1.0.so.200
> > /usr/libexec/elf/ld: warning: libgthread-2.0.so.0, needed by
> > /usr/X11R6/lib/libbonoboui-2.so, may conflict with
> libgthread-2.0.so.200
> > /usr/libexec/elf/ld: warning: libgtk-x11-2.0.so.0, needed by
> > /usr/X11R6/lib/libbonoboui-2.so, may conflict with
> libgtk-x11-2.0.so.200
> > /usr/libexec/elf/ld: warning: libgdk-x11-2.0.so.0, needed by
> > /usr/X11R6/lib/libbonoboui-2.so, may conflict with
> libgdk-x11-2.0.so.200
> > /usr/libexec/elf/ld: warning: libatk-1.0.so.0, needed by
> > /usr/X11R6/lib/libbonoboui-2.so, may conflict with libatk-1.0.so.200
> > /usr/libexec/elf/ld: warning: libgdk_pixbuf-2.0.so.0, needed by
> > /usr/X11R6/lib/libbonoboui-2.so, may conflict with
> > libgdk_pixbuf-2.0.so.200
> > /usr/libexec/elf/ld: warning: libpangoxft-1.0.so.0, needed by
> > /usr/X11R6/lib/libbonoboui-2.so, may conflict with
> > libpangoxft-1.0.so.200
> > /usr/libexec/elf/ld: warning: libXft.so.1, needed by
> > /usr/X11R6/lib/libbonoboui-2.so, may conflict with libXft.so.2
> > /usr/libexec/elf/ld: warning: libpangox-1.0.so.0, needed by
> > /usr/X11R6/lib/libbonoboui-2.so, may conflict with
> libpangox-1.0.so.200
> > /usr/libexec/elf/ld: warning: libpango-1.0.so.0, needed by
> > /usr/X11R6/lib/libbonoboui-2.so, may conflict with libpango-1.0.so.200
> > /usr/libexec/elf/ld: warning: libgobject-2.0.so.0, needed by
> > /usr/X11R6/lib/libbonoboui-2.so, may conflict with
> libgobject-2.0.so.200
> > /usr/libexec/elf/ld: warning: libgmodule-2.0.so.0, needed by
> > /usr/X11R6/lib/libbonoboui-2.so, may conflict with
> libgmodule-2.0.so.200
> > /usr/libexec/elf/ld: warning: libglib-2.0.so.0, needed by
> > /usr/X11R6/lib/libbonoboui-2.so, may conflict with libglib-2.0.so.200
> > ../src/recent-files/librecent.a(egg-recent-model.o): In function
> > `egg_recent_model_update_item':
> > egg-recent-model.o(.text+0x1fc): undefined reference to
> > `gnome_vfs_uris_match'
> > ../src/recent-files/librecent.a(egg-recent-model.o): In function
> > `egg_recent_model_filter':
> > egg-recent-model.o(.text+0x7e1): undefined reference to
> > `gnome_vfs_get_uri_scheme'
> > ../src/recent-files/librecent.a(egg-recent-item.o): In function
> > `egg_recent_item_set_uri':
> > egg-recent-item.o(.text+0x17f): undefined reference to
> > `gnome_vfs_make_uri_from_input'
> > egg-recent-item.o(.text+0x1e1): undefined reference to
> > `gnome_vfs_make_uri_from_input'
> > ../src/recent-files/librecent.a(egg-recent-item.o): In function
> > `egg_recent_item_get_uri_for_display':
> > egg-recent-item.o(.text+0x253): undefined reference to
> > `gnome_vfs_format_uri_for_display'
> > gmake[4]: *** [file-roller] Error 1
> > gmake[4]: Leaving directory
> > `/usr/ports/archivers/fileroller/work/file-roller-2.2.3/src'
> > gmake[3]: *** [all-recursive] Error 1
> > gmake[3]: Leaving directory
> > `/usr/ports/archivers/fileroller/work/file-roller-2.2.3/src'
> > gmake[2]: *** [all] Error 2
> > gmake[2]: Leaving directory
> > `/usr/ports/archivers/fileroller/work/file-roller-2.2.3/src'
> > gmake[1]: *** [all-recursive] Error 1
> > gmake[1]: Leaving directory
> > `/usr/ports/archivers/fileroller/work/file-roller-2.2.3'
> > gmake: *** [all] Error 2
> > *** Error code 2
> >
> > Stop in /usr/ports/archivers/fileroller.
> >
> >
> > -----------------------
> > Joe Mom
> > "Drain us of life and cleanse the mess"
> > MuDvAyNe
> > -----------------------
> >
> > -----Original Message-----
> > From: Joe Marcus Clarke [mailto:marcus at marcuscom.com]
> > Sent: Saturday, April 05, 2003 8:03 PM
> > To: Joe Mom
> > Cc: 'Mezz bsdforums.org'; freebsd-gnome at freebsd.org
> > Subject: RE: FileRoller Install stops
> >
> > On Sat, 2003-04-05 at 20:01, Joe Mom wrote:
> > > First off :
> > >
> > > Why don't you use the ports tree? To compile/install on your own
> hand
> > > without use ports tree, you need to use 'gmake' instead 'make'.
> > >
> > > I tried compiling from ports tree with worse errors. This is why I
> > > turned to manual compiling.
> >
> > What errors did you get when doing the port install?
> >
> > Joe
> >
> > >
> > > During the install it switches to gmake automagically. :)
> > >
> > > I need this program for gnome 2.2 to finish its install.
> > >
> > > -----------------------
> > > Joe Mom
> > > "Drain us of life and cleanse the mess"
> > > MuDvAyNe
> > > -----------------------
> > >
> > > -----Original Message-----
> > > From: Mezz bsdforums.org [mailto:reigncracks at hotmail.com]
> > > Sent: Saturday, April 05, 2003 7:48 PM
> > > To: compuman00 at hotmail.com
> > > Cc: freebsd-gnome at freebsd.org
> > > Subject: Re: FileRoller Install stops
> > >
> > > >Hi,
> > > >
> > > >I am wondering if anyone has heard of this before or if you might
> > have
> > > >any ideas for me.
> > > >
> > > >I am trying to install file roller 2.2.3 (for gnome 2.2) and after
> I
> > > do:
> > > >
> > > ># ./configure
> > > ># make install clean
> > >
> > > Why don't you use the ports tree? To compile/install on your own
> hand
> > > without use ports tree, you need to use 'gmake' instead 'make'.
> > >
> > > >The install seems to hang for ever about 1 minute into the install.
> > > >
> > > >Here is the last line I see ...
> > > >
> > > >"echo "#include \"fr-marshal.h\"" > fr-marshal.c &&
> > > >/usr/local/bin/glib-genmarshal --body --prefix=fr_marshal >>
> > > >fr-marshal.c"
> > >
> > > --prefix=fr_marshal ??? Is it such of directory in your system?
> > >
> > > Cheers,
> > > Mezz
> > >
> > > >and it never goes any further.
> > > >
> > > >I have attempted to install 2.1.5 as well with the same results.
> > > >
> > > >I can't seem to find any documentation online, otherwise I wouldn't
> > bug
> > > >you guys.
> > > >
> > > >
> > > >-----------------------
> > > >Joe Mom
> > > > "Drain us of life and cleanse the mess"
> > > > MuDvAyNe
> > > >-----------------------
> > >
> > > _______________________________________________
> > > freebsd-gnome at freebsd.org mailing list
> > > http://lists.freebsd.org/mailman/listinfo/freebsd-gnome
> > > To unsubscribe, send any mail to
> > "freebsd-gnome-unsubscribe at freebsd.org"
--
PGP Key : http://www.marcuscom.com/pgp.asc
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-gnome/attachments/20030405/3376b1e4/attachment.bin
More information about the freebsd-gnome
mailing list