another galeon2 spinner problem

[Glenn Johnson]

On Tue, Apr 01, 2003 at 08:15:32PM -0500, Joe Marcus Clarke wrote:

> On Tue, 2003-04-01 at 18:52, Glenn Johnson wrote:
>
> > On Tue, Apr 01, 2003 at 03:06:38PM -0500, Joe Marcus Clarke wrote:
> >
> > > On Tue, 2003-04-01 at 14:47, Glenn Johnson wrote:
> > >
> > > > I just set up a system at work that had a fresh hard drive.  I
> > > > installed FreeBSD-5.0 RELEASE and then immediately updated to
> > > > -current.  It is current as of today.  I installed Gnome2 fresh.
> > > > This was done about 2 weeks ago.  I have kept the ports up to
> > > > date via cvsup/portupgrade.  The galeon2 program does not show
> > > > the spinner; it never has on this system.
> > > >
> > > > I had this problem on my home system.  In that case the spinner
> > > > disappeared after an update of bonobo.  Subsequent updates fixed
> > > > this and my system at home has the spinner in galeon2.  The
> > > > system at home was not a fresh install of Gnome-2.2 as it had
> > > > gone through Gnome-2.1 first, via marcuscom.  What might be
> > > > missing on this freshly installed system?
> > >
> > > The galeon2-1.3.3 update from
> > > http://www.marcuscom.com/downloads/freeze/.  Note, you'll also
> > > need the mozilla diffs.
> >
> > Thanks.  I am curious though, why do I have the spinner on my home
> > system but not on this fresh install?  Other than the fact that my
> > home system is older, the two machines have the same ports tree
> > and the same versions of all software.  Could it perhaps be an old
> > library on my home system that portupgrade left behind?
>
> The problem was introduced with the latest libbonoboui.  If you have
> 2.2.0 the spinner will show up just fine.

I have libbonoboui-2.2.0.1 on both the system at work and the system at
home. Home system has spinner, work (freshly installed) does not.

-- 
Glenn Johnson
glennpj at charter.net