FreeBSD-10 microdrive seagate ST1AT 4GB (VIA mbo) problem

[Berislav Purgar]

On Thu, Nov 21, 2013 at 12:16 PM, Berislav Purgar <bpurgar at gmail.com> wrote:

>
>
>
> On Wed, Nov 20, 2013 at 10:40 PM, Berislav Purgar <bpurgar at gmail.com>wrote:
>
>> Hello ..
>>
>> I have problem with microdrive and some CF cards on IGEL 3/4 compact thin
>> client ( http://www.parkytowers.me.uk/thin/Igel/3210/index.shtml<http://www.parkytowers.me.uk/thin/Igel/3210/index.shtml> ).
>> Problem is that FreeBSD cannot find microdrive or CF card to mount sytem /
>> on (but kernel is found and loaded from microdrive or CF card). I have one
>> CF card (sandisk ultra II) which boots but with some timeouts before.
>> FreeBSD identifies ide controller as :
>> atapci0: <VIA 8237 UDMA133 controller> port
>> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe800-0xe80f at device 15.0 on pci0
>> ata0: <ATA channel> at channel 0 on atapci0
>> ata1: <ATA channel> at channel 1 on atapci0
>>
>> Here are links to pictures of this problem.
>>
>> (aprobe:ata0:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00
>> 00
>>
>>
>> http://s24.postimg.org/al2k6qfzp/WP_20131120_003_1.jpg
>> http://s17.postimg.org/wm0s58kzz/WP_20131120_007_1.jpg
>> http://s23.postimg.org/5sp2k4trf/WP_20131120_006_1.jpg
>>
>> i tried same configuration on openbsd5.3 and everething si Ok ..same
>> controler on openbsd :
>> http://s12.postimg.org/bztc7w1zx/WP_20131120_001_1.jpg
>>
>>  Any suggestions ?
>>
>> Tnx
>> sorry for my English ..
>>
>
>
> for better debuging i use gateworks GW2345 board and found
> some interestingly ... if i destroy all partitions and partitions schemes
> on microdrive freebsd founds microdrive at boot and display info for it..
>
> Timecounters tick every 10.000 msec
> ada0 at ata0 bus 0 scbus0 target 0 lun 0
> ada0: <ST640211CF 3.07> CFA-0 device
> ada0: 16.700MB/s transfers (PIO4, PIO 8192bytes)
> ada0: 3906MB (7999488 512 byte sectors: 16H 63S/T 7936C)
> ada0: Previously was known as ad0
>
> full dmesg is here :
> http://pastebin.com/eWJ4XGyN
>
> but if i create MBR (or GPT) on microdrive and check as before on avila
> board i got timeouts and microdrive not found ?!
>
> ata_avila0: <Gateworks Avila IDE/CF Controller> on ixp0
> ata0: <ATA channel 0> on ata_avila0
> led_avila0: <Gateworks Avila Front Panel LED> on ixp0
> gpio_avila0: <Gateworks Avila GPIO driver> on ixp0
> gpioc0: <GPIO controller> on gpio_avila0
> gpiobus0: <GPIO bus> on gpio_avila0
> Timecounter "IXP4XX Timer" frequency 66666600 Hz quality 1000
> Timecounters tick every 10.000 msec
> (aprobe0:ata0:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00
> 00
> (aprobe0:ata0:0:0:0): CAM status: Command timeout
> (aprobe0:ata0:0:0:0): Error 5, Retry was blocked
>
> full dmesg is here :
> http://pastebin.com/wPEexXKz
>
>
> http://pastebin.com/x5MinNQz
>
> why FreeBSD doesn't find microdrive when it has partitions or partition
> schemas ?
>
> Beri
>


nobody ?