gmirror cannot update metadata on disk da0s1
Daniel P. Zepeda
daniel at zepeda.ws
Tue Mar 15 14:03:37 PST 2005
What worked for me was the whole disk approach, not on-a-slice, ensured
that 'swapoff="YES" was in /etc/rc.conf, changed the reboot and halt
commands to shell scripts to ensure I always use 'shutdown -<h|r> when
rebooting, and the final nugget was to add:
kern.geom.mirror.timeout=0
to /boot/loader.conf
I think that was all, if I remember anything else, I'll let you know.
Hope it helps.
DZ
Octavian Hornoiu wrote:
>I have followed the instructions as per the document at
>http://people.freebsd.org/~rse/mirror/ to setup my geom mirror using
>FreeBSD 5.3-p5 and two 70 gig SCSI maxtor drives of identical size. I
>have tried both the whole partition gm0 and single slice gm0s1
>alternatives to mirroring the drives and I have tried both hardcoding
>and without hardcoding and I still get cannot update metadata or cannot
>read metadata or cannot write metadata. The drive with metadata
>problems will change depending with the setup so sometimes da0 works
>fine and da1 is broken or vice versa. There does not seem to be a
>pattern to this. I have worked with vinum many times before and I'm not
>inexperience but I have reached the end of the road with gmirror. I've
>tried 8 times to mirror these disks now with different configurations
>and I've failed every time. I have even alternated the sizes of the
>slices and left room at the end of the drive, at the beginning of the
>drive, etc. Here are the appropriate informational dumps:
>
>Copyright (c) 1992-2004 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
>FreeBSD 5.3-RELEASE-p5 #0: Wed Feb 23 16:19:57 PST 2005
> root at capone.bellevuechristian.org:/usr/obj/usr/src/sys/CAPONE
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.19-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
>
>Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Hyperthreading: 2 logical CPUs
>real memory = 2147221504 (2047 MB)
>avail memory = 2095755264 (1998 MB)
>ACPI APIC Table: <DELL PE BKC >
>FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> cpu2 (AP): APIC ID: 6
> cpu3 (AP): APIC ID: 7
>ioapic0: Changing APIC ID to 8
>ioapic1: Changing APIC ID to 9
>ioapic1: WARNING: intbase 32 != expected base 24
>ioapic2: Changing APIC ID to 10
>ioapic2: WARNING: intbase 64 != expected base 56
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>ioapic1 <Version 2.0> irqs 32-55 on motherboard
>ioapic2 <Version 2.0> irqs 64-87 on motherboard
>netsmb_dev: loaded
>npx0: [FAST]
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>acpi0: <DELL PE BKC> on motherboard
>acpi0: Power Button (fixed)
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>cpu0: <ACPI CPU> on acpi0
>cpu1: <ACPI CPU> on acpi0
>cpu2: <ACPI CPU> on acpi0
>cpu3: <ACPI CPU> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
>pci2: <ACPI PCI bus> on pcib2
>pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
>pci3: <ACPI PCI bus> on pcib3
>mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xec00-0xecff mem
>0xdfde0000-0xdfdeffff,0xdfdf0000-0xdfdfffff irq 34 at device 5.0 on pci3
>mpt0: [GIANT-LOCKED]
>em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
>0xe8c0-0xe8ff mem 0xdfdc0000-0xdfddffff irq 39 at device 12.0 on pci3
>em0: Ethernet address: 00:0e:0c:69:3a:44
>em0: Speed:N/A Duplex:N/A
>pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
>pci4: <ACPI PCI bus> on pcib4
>pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
>pci5: <ACPI PCI bus> on pcib5
>pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
>pci6: <ACPI PCI bus> on pcib6
>em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
>0xdcc0-0xdcff mem 0xdfae0000-0xdfafffff irq 64 at device 7.0 on pci6
>em1: Ethernet address: 00:11:43:d7:64:2e
>em1: Speed:N/A Duplex:N/A
>pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5
>pci7: <ACPI PCI bus> on pcib7
>em2: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
>0xccc0-0xccff mem 0xdf8e0000-0xdf8fffff irq 65 at device 8.0 on pci7
>em2: Ethernet address: 00:11:43:d7:64:2f
>em2: Speed:N/A Duplex:N/A
>pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0
>pci8: <ACPI PCI bus> on pcib8
>uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xace0-0xacff
>irq 16 at device 29.0 on pci0
>uhci0: [GIANT-LOCKED]
>usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
>usb0: USB revision 1.0
>uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 2 ports with 2 removable, self powered
>uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xacc0-0xacdf
>irq 19 at device 29.1 on pci0
>uhci1: [GIANT-LOCKED]
>usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
>usb1: USB revision 1.0
>uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub1: 2 ports with 2 removable, self powered
>uhub2: Dell product 0xa001, class 9/0, rev 2.00/0.00, addr 2
>uhub2: 2 ports with 2 removable, self powered
>uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xaca0-0xacbf
>irq 18 at device 29.2 on pci0
>uhci2: [GIANT-LOCKED]
>usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
>usb2: USB revision 1.0
>uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub3: 2 ports with 2 removable, self powered
>ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev
>1.10/3.00, addr 2, iclass 3/1
>ums0: 5 buttons and Z dir.
>pci0: <serial bus, USB> at device 29.7 (no driver attached)
>pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pci9: <ACPI PCI bus> on pcib9
>pci9: <display, VGA> at device 13.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH5 UDMA100 controller> port
>0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
>ata0: channel #0 on atapci0
>ata1: channel #1 on atapci0
>fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
>fdc0: [FAST]
>fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
>acpi0
>sio0: type 16550A
>orm0: <ISA Option ROMs> at iomem
>0xec000-0xeffff,0xcb000-0xcefff,0xc0000-0xcafff on isa0
>pmtimer0 on isa0
>ppc0: parallel port not found.
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>Timecounters tick every 10.000 msec
>acd0: CDROM <TEAC CD-ROM CD-224E/K.9A> at ata0-master UDMA33
>Waiting 15 seconds for SCSI devices to settle
>ses0 at mpt0 bus 0 target 6 lun 0
>ses0: <PE/PV 1x2 SCSI BP 1.0> Fixed Processor SCSI-2 device
>ses0: 3.300MB/s transfers
>ses0: SAF-TE Compliant Device
>da0 at mpt0 bus 0 target 0 lun 0
>da0: <MAXTOR ATLAS10K5_73SCA JNZ6> Fixed Direct Access SCSI-3 device
>da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged
>Queueing Enabled
>da0: 70007MB (143374650 512 byte sectors: 255H 63S/T 8924C)
>da1 at mpt0 bus 0 target 1 lun 0
>da1: <MAXTOR ATLAS10K5_73SCA JNZ6> Fixed Direct Access SCSI-3 device
>da1: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged
>Queueing Enabled
>da1: 70007MB (143374650 512 byte sectors: 255H 63S/T 8924C)
>GEOM_MIRROR: Device gm0s1 created (id=1445021139).
>GEOM_MIRROR: Device gm0s1: provider da0s1 detected.
>GEOM_MIRROR: Device gm0s1: provider da1s1 detected.
>GEOM_MIRROR: Device gm0s1: provider da1s1 activated.
>GEOM_MIRROR: Cannot update metadata on disk da0s1 (error=1).
>GEOM_MIRROR: Device gm0s1: provider da0s1 activated.
>GEOM_MIRROR: Device gm0s1: provider mirror/gm0s1 launched.
>GEOM_MIRROR: Cannot update metadata on disk da0s1 (error=1).
>GEOM_MIRROR: Device gm0s1: provider da0s1 disconnected.
>SMP: AP CPU #3 Launched!
>SMP: AP CPU #1 Launched!
>SMP: AP CPU #2 Launched!
>Mounting root from ufs:/dev/mirror/gm0s1a
>em0: Link is up 100 Mbps Full Duplex
>
>
>Metadata on /dev/da1s1:
> magic: GEOM::MIRROR
> version: 1
> name: gm0s1
> mid: 1445021139
> did: 4266048836
> all: 2
> syncid: 3
> priority: 0
> slice: 4096
> balance: round-robin
> mediasize: 73402365952
>sectorsize: 512
>syncoffset: 0
> mflags: NONE
> dflags: DIRTY
>hcprovider: da1s1
> MD5 hash: c082817f594eb795a95ebb547bb20f71
>
>
>Metadata on /dev/da0s1:
> magic: GEOM::MIRROR
> version: 1
> name: gm0s1
> mid: 1445021139
> did: 1764218562
> all: 2
> syncid: 3
> priority: 0
> slice: 4096
> balance: round-robin
> mediasize: 73402365952
>sectorsize: 512
>syncoffset: 22164275200
> mflags: NONE
> dflags: DIRTY SYNCHRONIZING
>hcprovider: da0s1
> MD5 hash: 74f4f6b2cc14a5624539431c455cab81
>
>
>Geom name: gm0s1
>State: DEGRADED
>Components: 2
>Balance: round-robin
>Slice: 4096
>Flags: NONE
>SyncID: 5
>ID: 1445021139
>Providers:
>1. Name: mirror/gm0s1
> Mediasize: 73402365952 (68G)
> Sectorsize: 512
> Mode: r6w6e1
>Consumers:
>1. Name: da1s1
> Mediasize: 73402366464 (68G)
> Sectorsize: 512
> Mode: r6w6e2
> State: ACTIVE
> Priority: 0
> Flags: DIRTY, HARDCODED
> SyncID: 5
> ID: 4266048836
>
>Geom name: gm0s1.sync
>
>
>
>******* Working on device /dev/da1 *******
>parameters extracted from in-core disklabel are:
>cylinders=8924 heads=255 sectors/track=63 (16065 blks/cyl)
>
>Figures below won't work with BIOS for partitions not in cyl 1
>parameters to be used for BIOS calculations are:
>cylinders=8924 heads=255 sectors/track=63 (16065 blks/cyl)
>
>Media sector size is 512
>Warning: BIOS sector numbering starts with sector 1
>Information from DOS bootblock is:
>The data for partition 1 is:
>sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
> start 63, size 143363997 (70001 Meg), flag 80 (active)
> beg: cyl 0/ head 1/ sector 1;
> end: cyl 1023/ head 254/ sector 63
>The data for partition 2 is:
><UNUSED>
>The data for partition 3 is:
><UNUSED>
>The data for partition 4 is:
><UNUSED>
>
>
>
>
># /dev/mirror/gm0s1:
>8 partitions:
># size offset fstype [fsize bsize bps/cpg]
> a: 1024000 0 4.2BSD 2048 16384 64008
> b: 8388608 1024000 swap
> c: 143363996 0 unused 0 0 # "raw" part,
>don't ed$
> d: 8388608 9412608 4.2BSD 2048 16384 28552
> e: 4194304 17801216 4.2BSD 2048 16384 28552
> f: 10240000 21995520 4.2BSD 2048 16384 28552
> g: 110182400 32235520 4.2BSD 2048 16384 28552
>
>
>Any help would be greatly appreciated! I am ready to pull my hair out
>and I'm already going bald so that would be bad!
>
>Octavian Hornoiu
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>freebsd-geom at freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-geom
>To unsubscribe, send any mail to "freebsd-geom-unsubscribe at freebsd.org"
>
>
More information about the freebsd-geom
mailing list