[SVN-Commit] r517 - branches/experimental/Mk trunk/Mk
svn-freebsd-gecko at chruetertee.ch
svn-freebsd-gecko at chruetertee.ch
Wed Mar 16 23:10:13 UTC 2011
Author: beat
Date: Wed Mar 16 23:10:05 2011
New Revision: 517
Log:
- Sync with ports
Modified:
branches/experimental/Mk/bsd.gecko.mk
branches/experimental/Mk/bsd.port.mk
trunk/Mk/bsd.gecko.mk
Modified: branches/experimental/Mk/bsd.gecko.mk
==============================================================================
--- branches/experimental/Mk/bsd.gecko.mk Tue Mar 15 14:16:11 2011 (r516)
+++ branches/experimental/Mk/bsd.gecko.mk Wed Mar 16 23:10:05 2011 (r517)
@@ -4,7 +4,7 @@
# Date created: 12 Nov 2005
# Whom: Michael Johnson <ahze at FreeBSD.org>
#
-# $FreeBSD: ports/Mk/bsd.gecko.mk,v 1.25 2010/11/30 13:03:10 beat Exp $
+# $FreeBSD: ports/Mk/bsd.gecko.mk,v 1.26 2010/12/18 11:15:33 beat Exp $
#
# 4 column tabs prevent hair loss and tooth decay!
@@ -184,16 +184,6 @@
# USE_FIREFOX_BUILD Add buildtime dependency on Firefox.
# Available values: see USE_FIREFOX
#
-# INVALID_FIREFOX_VER This variable contains a list of Firefox versions
-# not supported by the port. This setting is effective
-# only when USE_FIREFOX is set to a range (e.g. 35+)
-#
-# WITH_FIREFOX_VER User defined global variable to set Firefox version
-# This variable is effective only if USE_FIREFOX is
-# set to a range (e.g. 35+) and WITH_FIREFOX_VER
-# points inside that range.
-# NOTE: INVALID_FIREFOX_VER takes precedence
-#
# USE_SEAMONKEY Add runtime dependency on SeaMonkey. If no
# version is given by the maintainer via the port
# or by the user via defined variable try to find
@@ -205,16 +195,6 @@
# USE_SEAMONKEY_BUILD Add buildtime dependency on SeaMonkey.
# Available values: see USE_SEAMONKEY
#
-# INVALID_SEAMONKEY_VER This variable contains a list of SeaMonkey versions
-# not supported by the port. This setting is effective
-# only when USE_SEAMONKEY is set to a range (e.g. 11+)
-#
-# WITH_SEAMONKEY_VER User defined global variable to set SeaMonkey version
-# This variable is effective only if USE_SEAMONKEY is
-# set to a range (e.g. 11+) and WITH_SEAMONKEY_VER
-# points inside that range.
-# NOTE: INVALID_SEAMONKEY_VER takes precedence
-#
# USE_THUNDERBIRD Add runtime dependency on Thunderbird. If no
# version is given by the maintainer via the port
# or by the user via defined variable try to find
@@ -226,15 +206,6 @@
# USE_THUNDERBIRD_BUILD Add buildtime dependency on Thunderbird.
# Available values: see USE_THUNDERBIRD
#
-# INVALID_THUNDERBIRD_VER This variable contains a list of Thunderbird versions
-# not supported by the port. This setting is effective
-# only when USE_THUNDERBIRD is set to a range (e.g. 30+)
-#
-# WITH_THUNDERBIRD_VER User defined global variable to set Thunderbird version
-# This variable is effective only if USE_THUNDERBIRD is
-# set to a range (e.g. 30+) and WITH_THUNDERBIRD_VER
-# points inside that range.
-# NOTE: INVALID_THUNDERBIRD_VER takes precedence
#
# Firefox part
@@ -260,32 +231,6 @@
USE_FIREFOX= ${_FIREFOX_DEFAULT_VERSION}
.endif
-# Check if we have user-defined WITH_FIREFOX_VER and if it matches
-# the range specified in port's USE_FIREFOX
-.if defined(WITH_FIREFOX_VER)
-.for ver in ${_FIREFOX_RANGE_VERSIONS}
-.if ${USE_FIREFOX} == "${ver}"
-_MATCHED_FIREFOX_VER:= ${USE_FIREFOX:S/+//}
-.for firefox in ${_FIREFOX_${_MATCHED_FIREFOX_VER}P}
-.if ${WITH_FIREFOX_VER} == ${firefox}
-# Check if user supplied WITH_FIREFOX is in the INVALID_FIREFOX_VER list
-_BRKFIREFOX= no
-.for iver in ${INVALID_FIREFOX_VER}
-.if ${WITH_FIREFOX_VER} == ${iver}
-_BRKFIREFOX= yes
-.endif
-.endfor
-# If WITH_FIREFOX is not in the INVALID_FIREFOX_VER list, use it
-# otherwise take default from port
-.if ${_BRKFIREFOX} == "no"
-USE_FIREFOX= ${WITH_FIREFOX_VER}
-.endif
-.endif
-.endfor
-.endif
-.endfor
-.endif
-
# Setting/finding Firefox version we want.
.if exists(${LOCALBASE}/bin/firefox3)
_FIREFOX_VER!= ${LOCALBASE}/bin/firefox3 --version | ${SED} -e 's/Mozilla Firefox \([0-9]\)\.\([0-9]*\).*/\1\2/'
@@ -359,32 +304,6 @@
USE_SEAMONKEY= ${_SEAMONKEY_DEFAULT_VERSION}
.endif
-# Check if we have user-defined WITH_SEAMONKEY_VER and if it matches
-# the range specified in port's USE_SEAMONKEY
-.if defined(WITH_SEAMONKEY_VER)
-.for ver in ${_SEAMONKEY_RANGE_VERSIONS}
-.if ${USE_SEAMONKEY} == "${ver}"
-_MATCHED_SEAMONKEY_VER:= ${USE_SEAMONKEY:S/+//}
-.for seamonkey in ${_SEAMONKEY_${_MATCHED_SEAMONKEY_VER}P}
-.if ${WITH_SEAMONKEY_VER} == ${seamonkey}
-# Check if user supplied WITH_SEAMONKEY is in the INVALID_SEAMONKEY_VER list
-_BRKSEAMONKEY= no
-.for iver in ${INVALID_SEAMONKEY_VER}
-.if ${WITH_SEAMONKEY_VER} == ${iver}
-_BRKSEAMONKEY= yes
-.endif
-.endfor
-# If WITH_SEAMONKEY is not in the INVALID_SEAMONKEY_VER list, use it
-# otherwise take default from port
-.if ${_BRKSEAMONKEY} == "no"
-USE_SEAMONKEY= ${WITH_SEAMONKEY_VER}
-.endif
-.endif
-.endfor
-.endif
-.endfor
-.endif
-
# Setting/finding SeaMonkey version we want.
.if exists(${LOCALBASE}/bin/seamonkey)
_SEAMONKEY_VER!= ${LOCALBASE}/bin/seamonkey --version | ${SED} -e 's/Mozilla SeaMonkey \([0-9]\)\.\([0-9]*\).*/\1\2/'
@@ -456,32 +375,6 @@
USE_THUNDERBIRD= ${_THUNDERBIRD_DEFAULT_VERSION}
.endif
-# Check if we have user-defined WITH_THUNDERBIRD_VER and if it matches
-# the range specified in port's USE_THUNDERBIRD
-.if defined(WITH_THUNDERBIRD_VER)
-.for ver in ${_THUNDERBIRD_RANGE_VERSIONS}
-.if ${USE_THUNDERBIRD} == "${ver}"
-_MATCHED_THUNDERBIRD_VER:= ${USE_THUNDERBIRD:S/+//}
-.for thunderbird in ${_THUNDERBIRD_${_MATCHED_THUNDERBIRD_VER}P}
-.if ${WITH_THUNDERBIRD_VER} == ${thunderbird}
-# Check if user supplied WITH_THUNDERBIRD is in the INVALID_THUNDERBIRD_VER list
-_BRKTHUNDERBIRD= no
-.for iver in ${INVALID_THUNDERBIRD_VER}
-.if ${WITH_THUNDERBIRD_VER} == ${iver}
-_BRKTHUNDERBIRD= yes
-.endif
-.endfor
-# If WITH_THUNDERBIRD is not in the INVALID_THUNDERBIRD_VER list, use it
-# otherwise take default from port
-.if ${_BRKTHUNDERBIRD} == "no"
-USE_THUNDERBIRD= ${WITH_THUNDERBIRD_VER}
-.endif
-.endif
-.endfor
-.endif
-.endfor
-.endif
-
# Setting/finding Thunderbird version we want.
.if exists(${LOCALBASE}/bin/thunderbird)
_THUNDERBIRD_VER!= ${LOCALBASE}/bin/thunderbird --version | ${SED} -e 's/ Thunderbird \([0-9]\)\.\([0-9]*\).*/\1\2/'
Modified: branches/experimental/Mk/bsd.port.mk
==============================================================================
--- branches/experimental/Mk/bsd.port.mk Tue Mar 15 14:16:11 2011 (r516)
+++ branches/experimental/Mk/bsd.port.mk Wed Mar 16 23:10:05 2011 (r517)
@@ -1,7 +1,7 @@
#-*- mode: makefile; tab-width: 4; -*-
# ex:ts=4
#
-# $FreeBSD: ports/Mk/bsd.port.mk,v 1.635 2010/02/05 21:18:15 skv Exp $
+# $FreeBSD: ports/Mk/bsd.port.mk,v 1.674 2011/03/07 07:32:05 erwin Exp $
# $NetBSD: $
#
# bsd.port.mk - 940820 Jordan K. Hubbard.
@@ -94,7 +94,8 @@
# EXTRACT_SUFX - Suffix for archive names
# You never have to set both DISTFILES and EXTRACT_SUFX.
# Default: .tar.bz2 if USE_BZIP2 is set, .zip if USE_ZIP is
-# set, .run if USE_MAKESELF is set, .tar.gz otherwise).
+# set, .tar.xz if USE_XZ is set, .run if USE_MAKESELF is set,
+# .tar.gz otherwise).
# MASTER_SITES - Primary location(s) for distribution files if not found
# locally. See bsd.sites.mk for common choices for
# MASTER_SITES.
@@ -287,15 +288,17 @@
# settable options. (Setting USE_* in /etc/make.conf is always wrong).
#
# WITH_DEBUG - If set, debugging flags are added to CFLAGS and the
-# binaries don't get stripped by INSTALL_PROGRAM.
-# Besides, individual ports might add their specific
-# to produce binaries for debugging purposes.
-# You can override the debug flags that are passed to
-# the compiler by setting DEBUG_FLAGS. It is set to
-# "-g" at default.
+# binaries don't get stripped by INSTALL_PROGRAM or
+# INSTALL_LIB. Besides, individual ports might
+# add their specific to produce binaries for debugging
+# purposes. You can override the debug flags that are
+# passed to the compiler by setting DEBUG_FLAGS. It is
+# set to "-g" at default.
#
# USE_BZIP2 - If set, this port tarballs use bzip2, not gzip, for
# compression.
+# USE_XZ - If set, this port tarballs use xz (or lzma)
+# for compression
# USE_ZIP - If set, this port distfile uses zip, not tar w/[bg]zip
# for compression.
# USE_MAKESELF - If set, this port distfile uses makeself, not tar w/[bg]zip
@@ -309,12 +312,16 @@
# USE_GCC - If set, this port requires this version of gcc, either in
# the system or installed from a port.
# USE_CSTD - Override the default C language standard (gnu89, gnu99)
+# USE_BINUTILS - Use binutils suite from port instead of the version in base.
# USE_GMAKE - If set, this port uses gmake.
# GMAKE - Set to path of GNU make if not in $PATH.
# Default: gmake
##
# USE_ICONV - If set, this port uses libiconv.
-# USE_GETTEXT - If set, this port uses GNU gettext (libintl).
+# USE_GETTEXT - The port uses GNU gettext (libintl).
+# 'build' as a build-time dependency
+# 'yes' as a library dependency
+# 'run' as a run-time dependency
##
# USE_PERL5 - If set, this port uses perl5 in one or more of the extract,
# patch, build, install or run phases.
@@ -364,8 +371,7 @@
# should not be used in Makefile.
##
# USE_BISON - Implies that the port uses bison in one way or another:
-# 'yes' (backwards compatibility) - use bison for building
-# new features: 'build', 'run', 'both', implying build,
+# 'build', 'run', 'both', implying build,
# runtime, and both build/run dependencies
##
# USE_IMAKE - If set, this port uses imake.
@@ -383,7 +389,7 @@
# USE_GL - A list of Mesa or GL related dependencies needed by the port.
# Supported components are: glut, glu, glw, gl and linux.
# If set to "yes", this is equivalent to "glu". Note that
-# glut depends on glu, glw and glu depend on gl.
+# glew and glut depend on glu, glw and glu depend on gl.
# USE_MOTIF - If set, this port uses a Motif toolkit. Implies USE_XORG+= xpm
# NO_OPENMOTIF - If set, this port uses a custom Motif toolkit
# instead of Openmotif.
@@ -441,6 +447,8 @@
# Implies inclusion of bsd.python.mk. (Also see
# that file for more information on USE_PYTHON_*
# and USE_PYDISTUTILS).
+# USE_R_MOD - If set, this port uses the Comprehensive R Archive Network.
+# See bsd.cran.mk for more details.
# USE_RUBY - If set, this port relies on the Ruby language.
# Implies inclusion of bsd.ruby.mk. (Also see
# that file for more information on USE_RUBY_*).
@@ -489,7 +497,7 @@
# or a sound server which supports the FreeBSD native one),
# use the default or the X11 prefix if it's a leaf port
# (e.g. a game or program).
-# Implies NO_MTREE=yes, and, if INSTALLS_SHLIB is defined:
+# Implies NO_MTREE=yes, and, if USE_LDCONFIG is defined:
# - USE_LINUX=yes
# - appropriate invocation of the Linux ldconfig
# USE_LINUX_RPM - Set to yes to pull in variables and targets useful to Linux
@@ -519,8 +527,7 @@
# Implies inclusion of bsd.xorg.mk.
##
# USE_RC_SUBR - If set, the ports startup/shutdown script uses the common
-# routines found in etc/rc.subr and may need to
-# depend on the sysutils/rc_subr port.
+# routines found in /etc/rc.subr.
# If this is set to a list of files, these files will be
# automatically added to ${SUB_FILES}, some %%VAR%%'s will
# automatically be expanded, they will be installed in
@@ -528,16 +535,12 @@
# USE_RCORDER - List of rc.d startup scripts to be called early in the boot
# process. This acts exactly like USE_RC_SUBR except that
# scripts are installed in /etc/rc.d.
-# RC_SUBR - Set to path of rc.subr.
-# Default: ${LOCALBASE}/etc/rc.subr.
-# RC_SUBR_SUFFIX
-# - Contains the suffix of installed rc.subr scripts.
+# Because local rc.d scripts are included in the base rcorder
+# this option is not needed unless the port installs in the base.
##
# USE_APACHE - If set, this port relies on an apache webserver.
#
-# USE_CDRTOOLS - If set, this port depends on sysutils/cdrtools, unless
-# cdrtools-cjk is present or USE_CDRTOOLS=cjk is set, then
-# it depends on sysutils/cdrtools-cjk.
+# USE_CDRTOOLS - If set, this port depends on sysutils/cdrtools.
#
# Conflict checking. Use if your port cannot be installed at the same time as
# another package.
@@ -547,6 +550,12 @@
# pattern meta-characters "*", "?", "[", "]", and "!".
# Example: apache*-1.2* apache*-1.3.[012345] apache-*+ssl_*
#
+# CONFLICTS_BUILD
+# - Check conflict prior to the build.
+#
+# CONFLICTS_INSTALL
+# - Check conflict prior to the installation stage.
+#
# Various directory definitions and variables to control them.
# You rarely need to redefine any of these except WRKSRC and NO_WRKSUBDIR.
#
@@ -599,6 +608,8 @@
# Default: ${MASTERDIR}/files
# PKGDIR - A directory containing any package creation files.
# Default: ${MASTERDIR}
+# SRC_BASE - The root of the src tree. (Some ports require this to get
+# kernel sources). Default: /usr/src
# UID_FILES - A list of files containing information about registered UIDs.
# Note that files have decreasing priority.
# GID_FILES - A list of files containing information about registered GIDs.
@@ -612,6 +623,7 @@
# default, also strips them, unless ${STRIP} is
# overridden to be the empty string).
# INSTALL_KLD - As INSTALL_PROGRAM, but without the STRIP.
+# INSTALL_LIB - As INSTALL_DATA, but also strips the file.
# INSTALL_SCRIPT
# - A command to install executable scripts.
# INSTALL_DATA - A command to install sharable data.
@@ -680,7 +692,7 @@
# Shell glob patterns can be used, directories include
# the entire subtree of contained files and directories.
# Should not be set when no documentation files are
-# installed (for example because NOPORTDOCS is defined).
+# installed.
# Useful for dynamically generated documentation.
#
# Set the following to specify all documentation your port installs into
@@ -690,7 +702,7 @@
# Shell glob patterns can be used, directories include
# the entire subtree of contained files and directories.
# Should not be set when no examples files are
-# installed (for example because NOPORTEXAMPLES is defined).
+# installed.
# Useful for dynamically generated examples.
#
# Set the following to specify all documentation your port installs into
@@ -700,7 +712,7 @@
# Shell glob patterns can be used, directories include
# the entire subtree of contained files and directories.
# Should not be set when no data files are
-# installed (for example because NOPORTDATA is defined).
+# installed.
# Useful for dynamically generated data files.
#
# Default targets and their behaviors:
@@ -761,7 +773,7 @@
# deinstall-all - Remove all installations with the same PKGORIGIN.
# package - Create a package from an _installed_ port.
# package-recursive
-# - Create a package for a port and _all_ of its dependancies.
+# - Create a package for a port and _all_ of its dependencies.
# describe - Try to generate a one-line description for each port for
# use in INDEX files and the like.
# checkpatch - Do a "patch -C" instead of a "patch". Note that it may
@@ -777,14 +789,16 @@
# Automatically run prior to extract, patch, configure, build,
# install, and package.
# config-recursive
-# - Configure options for this port for this port and all
+# - Configure options for this port for a port and all its
# dependencies.
# showconfig - Display options config for this port.
# showconfig-recursive
-# - Display options config for this port and all dependencies.
+# - Display options config for this port and all its
+# dependencies.
# rmconfig - Remove the options config for this port.
# rmconfig-recursive
-# - Remove the options config for this port and all dependencies.
+# - Remove the options config for this port and all its
+# dependencies.
#
# Default sequence for "all" is:
#
@@ -827,7 +841,7 @@
# FETCH_BINARY - Path to ftp/http fetch command if not in $PATH.
# Default: "/usr/bin/fetch"
# FETCH_ARGS - Arguments to ftp/http fetch command.
-# Default: "-ApRr"
+# Default: "-AFpr"
# FETCH_CMD - ftp/http fetch command.
# Default: ${FETCH_BINARY} ${FETCH_ARGS}
# FETCH_BEFORE_ARGS
@@ -857,14 +871,6 @@
# change the owner and group of all files under ${WRKDIR}
# to 0:0. Set this variable if you want to turn off this
# feature.
-#
-# For makesum:
-#
-# NO_SIZE - Don't record size data in distinfo, needed
-# when the master site does not report file
-# sizes, or when multiple valid versions of
-# a distfile, having different sizes, exist.
-#
# For patch:
#
# EXTRA_PATCHES - Define this variable if you have patches not in
@@ -964,6 +970,7 @@
# Default: ${PORTSDIR}/Templates/BSD.local.dist or
# /etc/mtree/BSD.usr.dist if ${PREFIX} == "/usr".
# PLIST_DIRS - Directories to be added to packing list
+# PLIST_DIRSTRY - Directories to be added to packing list and try to remove them.
# PLIST_FILES - Files and symbolic links to be added to packing list
#
# PLIST - Name of the `packing list' file.
@@ -990,25 +997,10 @@
# SUB_LIST - List of "variable=value" pair for substitution in ${SUB_FILES}
# Some pairs are added by default: eg. PREFIX=${PREFIX}
#
-# INSTALLS_SHLIB
-# - If set, bsd.port.mk will automatically run ldconfig commands
-# from post-install and also add appropriate @exec/@unexec
-# directives to directories listed in LDCONFIG_DIRS. (deprecated)
-# If USE_LINUX_PREFIX is defined, the Linux version of
-# ldconfig will be used instead of the native FreeBSD
-# version, and LDCONFIG_DIRS will be ignored.
-# LDCONFIG_DIRS - List of directories to run ldconfig if INSTALLS_SHLIB is set.
-# Note that this is passed through sed just like the
-# rest of PLIST, so ${PLIST_SUB} substitutions also
-# apply here. It is recommended that you use
-# %%PREFIX%% for ${PREFIX}, %%LOCALBASE%% for
-# ${LOCALBASE} and %%X11BASE%% for ${X11BASE}.
-# Default: %%PREFIX%%/lib
-# USE_LDCONFIG - If set to "yes", this subsumes the function of the
-# deprecated variable INSTALLS_SHLIB and adds ${PREFIX}/lib
-# to the list of directories to be searched for shared
-# libraries. Otherwise, this is a list of directories to
-# be added to that list. The directory names are written to
+# USE_LDCONFIG - If set to "yes", this adds ${PREFIX}/lib to the list of
+# directories to be searched for shared libraries.
+# Otherwise, this is a list of directories to be added to that
+# list. The directory names are written to
# ${PREFIX}/libdata/ldconfig/${UNIQUENAME} which is then
# used by the ldconfig startup script.
# This mechanism replaces ldconfig scripts installed by some
@@ -1130,7 +1122,7 @@
# - Different checksum algorithms to check for verifying the
# integrity of the distfiles. The absence of the algorithm
# in distinfo doesn't make it fail.
-# Default: md5 sha256
+# Default: sha256 (md5 is deprecated, allowed but unused)
# NO_CHECKSUM - Don't verify the checksum. Typically used when
# when you noticed the distfile you just fetched has
# a different checksum and you intend to verify if
@@ -1159,6 +1151,7 @@
DISTDIR?= ${PORTSDIR}/distfiles
_DISTDIR?= ${DISTDIR}/${DIST_SUBDIR}
INDEXDIR?= ${PORTSDIR}
+SRC_BASE?= /usr/src
.include "${PORTSDIR}/Mk/bsd.commands.mk"
@@ -1228,7 +1221,7 @@
.if exists(/usr/include/sys/param.h)
OSVERSION!= ${AWK} '/^\#define[[:blank:]]__FreeBSD_version/ {print $$3}' < /usr/include/sys/param.h
.elif exists(/usr/src/sys/sys/param.h)
-OSVERSION!= ${AWK} '/^\#define[[:blank::]]__FreeBSD_version/ {print $$3}' < /usr/src/sys/sys/param.h
+OSVERSION!= ${AWK} '/^\#define[[:blank:]]__FreeBSD_version/ {print $$3}' < /usr/src/sys/sys/param.h
.else
OSVERSION!= ${SYSCTL} -n kern.osreldate
.endif
@@ -1347,6 +1340,11 @@
CONFIGURE_ENV+= TMPDIR="${TMPDIR}"
.endif # defined(TMPDIR)
+# Reset value from bsd.own.mk.
+.if defined(WITH_DEBUG) && !defined(WITHOUT_DEBUG)
+STRIP= #none
+.endif
+
# Start of pre-makefile section.
.if !defined(AFTERPORTMK) && !defined(INOPTIONSMK)
@@ -1416,6 +1414,8 @@
EXTRACT_SUFX?= .tar.bz2
.elif defined(USE_ZIP)
EXTRACT_SUFX?= .zip
+.elif defined(USE_XZ)
+EXTRACT_SUFX?= .tar.xz
.elif defined(USE_MAKESELF)
EXTRACT_SUFX?= .run
.else
@@ -1438,12 +1438,6 @@
.if defined(USE_LINUX_PREFIX)
LDCONFIG_CMD?= ${LINUXBASE}/sbin/ldconfig -r ${LINUXBASE}
-LDCONFIG_PLIST_EXEC_CMD?= ${LDCONFIG_CMD}
-LDCONFIG_PLIST_UNEXEC_CMD?= ${LDCONFIG_CMD}
-.else
-LDCONFIG_CMD?= ${LDCONFIG} -m ${LDCONFIG_RUNLIST}
-LDCONFIG_PLIST_EXEC_CMD?= ${LDCONFIG} -m ${LDCONFIG_PLIST}
-LDCONFIG_PLIST_UNEXEC_CMD?= ${LDCONFIG} -R
.endif
PKGCOMPATDIR?= ${LOCALBASE}/lib/compat/pkg
@@ -1472,7 +1466,9 @@
PERL_ARCH?= mach
-.if ${PERL_LEVEL} >= 501000
+.if ${PERL_LEVEL} >= 501200
+PERL_PORT?= perl5.12
+.elif ${PERL_LEVEL} >= 501000
PERL_PORT?= perl5.10
.else
PERL_PORT?= perl5.8
@@ -1526,6 +1522,10 @@
.include "${PORTSDIR}/Mk/bsd.java.mk"
.endif
+.if defined(USE_R_MOD)
+.include "${PORTSDIR}/Mk/bsd.cran.mk"
+.endif
+
.if defined(USE_RUBY) || defined(USE_LIBRUBY)
.include "${PORTSDIR}/Mk/bsd.ruby.mk"
.endif
@@ -1538,7 +1538,7 @@
.include "${PORTSDIR}/Mk/bsd.tcl.mk"
.endif
-.if defined(USE_APACHE) || defined(APACHE_COMPAT)
+.if defined(USE_APACHE)
.include "${PORTSDIR}/Mk/bsd.apache.mk"
.endif
@@ -1554,7 +1554,7 @@
.include "${PORTSDIR}/Mk/bsd.gecko.mk"
.endif
-.if defined(WANT_GNOME) || defined(USE_GNOME)
+.if defined(WANT_GNOME) || defined(USE_GNOME) || defined(INSTALLS_ICONS)
.include "${PORTSDIR}/Mk/bsd.gnome.mk"
.endif
@@ -1635,9 +1635,9 @@
WWWDIR=${WWWDIR} ETCDIR=${ETCDIR}
PLIST_REINPLACE+= dirrmtry stopdaemon rmtry
-PLIST_REINPLACE_DIRRMTRY=s!^@dirrmtry \(.*\)!@unexec rmdir %D/\1 2>/dev/null || true!
+PLIST_REINPLACE_DIRRMTRY=s!^@dirrmtry \(.*\)!@unexec rmdir "%D/\1" 2>/dev/null || true!
PLIST_REINPLACE_RMTRY=s!^@rmtry \(.*\)!@unexec rm -f %D/\1 2>/dev/null || true!
-PLIST_REINPLACE_STOPDAEMON=s!^@stopdaemon \(.*\)!@unexec %D/etc/rc.d/\1${RC_SUBR_SUFFIX} forcestop 2>/dev/null || true!
+PLIST_REINPLACE_STOPDAEMON=s!^@stopdaemon \(.*\)!@unexec %D/etc/rc.d/\1 forcestop 2>/dev/null || true!
# kludge to strip trailing whitespace from CFLAGS;
# sub-configure will not # survive double space
@@ -1652,7 +1652,6 @@
.endif
.if defined(WITH_DEBUG) && !defined(WITHOUT_DEBUG)
-STRIP= #none
STRIP_CMD= ${TRUE}
DEBUG_FLAGS?= -g
CFLAGS:= ${CFLAGS:N-O*:N-fno-strict*} ${DEBUG_FLAGS}
@@ -1734,6 +1733,9 @@
.if defined(USE_ZIP)
EXTRACT_DEPENDS+= ${LOCALBASE}/bin/unzip:${PORTSDIR}/archivers/unzip
.endif
+.if defined(USE_XZ) && ( (${OSVERSION} >= 900000 && ${OSVERSION} < 900012) || ${OSVERSION} < 800505 )
+EXTRACT_DEPENDS+= ${LOCALBASE}/bin/xz:${PORTSDIR}/archivers/xz
+.endif
.if defined(USE_MAKESELF)
EXTRACT_DEPENDS+= unmakeself:${PORTSDIR}/archivers/unmakeself
.endif
@@ -1746,6 +1748,22 @@
.include "${PORTSDIR}/Mk/bsd.gcc.mk"
.endif
+.if defined(USE_BINUTILS) && !defined(DISABLE_BINUTILS)
+BUILD_DEPENDS+= ${LOCALBASE}/bin/as:${PORTSDIR}/devel/binutils
+BINUTILS?= ADDR2LINE AR AS CPPFILT GPROF LD NM OBJCOPY OBJDUMP RANLIB \
+ READELF SIZE STRINGS
+BINUTILS_NO_MAKE_ENV?=
+. for b in ${BINUTILS}
+${b}= ${LOCALBASE}/bin/${b:C/PP/++/:L}
+. if defined(GNU_CONFIGURE) || defined(BINUTILS_CONFIGURE)
+CONFIGURE_ENV+= ${b}="${${b}}"
+. endif
+. if ${BINUTILS_NO_MAKE_ENV:M${b}} == ""
+MAKE_ENV+= ${b}="${${b}}"
+. endif
+. endfor
+.endif
+
.if defined(USE_OPENLDAP) || defined(WANT_OPENLDAP_VER)
.include "${PORTSDIR}/Mk/bsd.ldap.mk"
.endif
@@ -1753,7 +1771,7 @@
.if defined(USE_OPENAL)
_OPENAL_ALL= al si soft alut
_OPENAL_LIBS= si soft
-# Default choie.
+# Default choice.
_DEFAULT_OPENAL= soft
_OPENAL_SOFT= openal.1:${PORTSDIR}/audio/openal-soft
@@ -1867,21 +1885,13 @@
.endif
.endif # USE_FAM
-.if defined(USE_RC_SUBR) || defined(USE_RCORDER)
-RC_SUBR= /etc/rc.subr
-SUB_LIST+= RC_SUBR=${RC_SUBR}
.if defined(USE_RC_SUBR) && ${USE_RC_SUBR:U} != "YES"
SUB_FILES+= ${USE_RC_SUBR}
.endif
+
.if defined(USE_RCORDER)
SUB_FILES+= ${USE_RCORDER}
.endif
-.if (${OSVERSION} >= 700007 || ${OSVERSION} < 700000)
-RC_SUBR_SUFFIX?=
-.else
-RC_SUBR_SUFFIX?= .sh
-.endif
-.endif
.if defined(USE_LDCONFIG) && ${USE_LDCONFIG:L} == "yes"
USE_LDCONFIG= ${PREFIX}/lib
@@ -1895,14 +1905,18 @@
.endif
.if defined(USE_GETTEXT)
-. if ${USE_GETTEXT:L} == "yes"
+. if ${USE_GETTEXT:L} == "build"
+BUILD_DEPENDS+= xgettext:${PORTSDIR}/devel/gettext
+. elif ${USE_GETTEXT:L} == "run"
+RUN_DEPENDS+= xgettext:${PORTSDIR}/devel/gettext
+. elif ${USE_GETTEXT:L} == "yes"
LIB_DEPENDS+= intl:${PORTSDIR}/devel/gettext
. else
-LIB_DEPENDS+= intl.${USE_GETTEXT}:${PORTSDIR}/devel/gettext
+IGNORE= USE_GETTEXT can be only one of build, run, or yes
. endif
.endif
-.if defined(USE_LINUX_PREFIX) && (defined(INSTALLS_SHLIB) || defined(USE_LDCONFIG))
+.if defined(USE_LINUX_PREFIX) && defined(USE_LDCONFIG)
# we need ${LINUXBASE}/sbin/ldconfig
USE_LINUX?= yes
.endif
@@ -1935,7 +1949,7 @@
LINUX_BASE_PORT= ${LINUXBASE}/bin/sh:${PORTSDIR}/emulators/linux_base-${USE_LINUX}
. else
. if ${USE_LINUX:L} == "yes"
-. if ${OSVERSION} < 800076
+. if ${OSVERSION} < 800076 || ${LINUX_OSRELEASE} == "2.4.2"
LINUX_BASE_PORT= ${LINUXBASE}/etc/fedora-release:${PORTSDIR}/emulators/linux_base-fc4
. else
LINUX_BASE_PORT= ${LINUXBASE}/etc/fedora-release:${PORTSDIR}/emulators/linux_base-f10
@@ -1981,13 +1995,18 @@
X_FONTS_ALIAS_PORT= ${PORTSDIR}/x11-fonts/font-alias
.if defined(USE_IMAKE)
-BUILD_DEPENDS+= imake:${X_IMAKE_PORT}
+CONFIGURE_ENV+= IMAKECPP="${CPP}"
+MAKE_ENV+= IMAKECPP="${CPP}"
+MAKE_FLAGS?= CC="${CC}" CXX="${CXX}"
+BUILD_DEPENDS+= imake:${X_IMAKE_PORT}
.endif
.if defined(USE_DISPLAY) && !defined(DISPLAY)
BUILD_DEPENDS+= Xvfb:${X_VFBSERVER_PORT} \
${X11BASE}/lib/X11/fonts/misc/8x13O.pcf.gz:${X_FONTS_MISC_PORT} \
- ${X11BASE}/lib/X11/fonts/misc/fonts.alias:${X_FONTS_ALIAS_PORT}
+ ${X11BASE}/lib/X11/fonts/misc/fonts.alias:${X_FONTS_ALIAS_PORT} \
+ ${X11BASE}/share/X11/xkb/rules/base:${PORTSDIR}/x11/xkeyboard-config \
+ xkbcomp:${PORTSDIR}/x11/xkbcomp
.if !defined(PACKAGE_BUILDING)
CONFIGURE_ENV+= DISPLAY="localhost:1001"
MAKE_ENV+= DISPLAY="localhost:1001"
@@ -2004,6 +2023,7 @@
PLIST_SUB+= XAWVER=${XAWVER}
_GL_gl_LIB_DEPENDS= GL.1:${PORTSDIR}/graphics/libGL
+_GL_glew_LIB_DEPENDS= GLEW.1:${PORTSDIR}/graphics/glew
_GL_glu_LIB_DEPENDS= GLU.1:${PORTSDIR}/graphics/libGLU
_GL_glw_LIB_DEPENDS= GLw.1:${PORTSDIR}/graphics/libGLw
_GL_glut_LIB_DEPENDS= glut.3:${PORTSDIR}/graphics/libglut
@@ -2027,13 +2047,6 @@
.if defined(USE_BISON)
_BISON_DEPENDS= bison:${PORTSDIR}/devel/bison
-# XXX: backwards compatibility
-. if ${USE_BISON:L} == "yes"
-USE_BISON= build
-pre-everything::
- @${ECHO_MSG} "WARNING: USE_BISON=yes deprecated, use build/run/both"
-. endif
-
. if ${USE_BISON:L} == "build"
BUILD_DEPENDS+= ${_BISON_DEPENDS}
. elif ${USE_BISON:L} == "run"
@@ -2231,14 +2244,9 @@
# Set up the cdrtools.
.if defined(USE_CDRTOOLS)
-.if exists(${DOCSDIR}/cdrtools-cjk/README) || defined(WITH_CJK) || ${USE_CDRTOOLS:L} == "cjk"
-BUILD_DEPENDS+= cdrecord:${PORTSDIR}/sysutils/cdrtools-cjk
-RUN_DEPENDS+= cdrecord:${PORTSDIR}/sysutils/cdrtools-cjk
-.else
BUILD_DEPENDS+= cdrecord:${PORTSDIR}/sysutils/cdrtools
RUN_DEPENDS+= cdrecord:${PORTSDIR}/sysutils/cdrtools
.endif
-.endif
# Macro for doing in-place file editing using regexps
REINPLACE_ARGS?= -i.bak
@@ -2259,16 +2267,18 @@
# Use this as the first operand to always build dependency.
NONEXISTENT?= /nonexistent
-CHECKSUM_ALGORITHMS?= md5 sha256
+CHECKSUM_ALGORITHMS?= sha256
-MD5_FILE?= ${MASTERDIR}/distinfo
+DISTINFO_FILE?= ${MASTERDIR}/distinfo
MAKE_FLAGS?= -f
MAKEFILE?= Makefile
MAKE_ENV+= PREFIX=${PREFIX} \
LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} \
MOTIFLIB="${MOTIFLIB}" LIBDIR="${LIBDIR}" \
- CC="${CC}" CFLAGS="${CFLAGS}" CXX="${CXX}" CXXFLAGS="${CXXFLAGS}" \
+ CC="${CC}" CFLAGS="${CFLAGS}" \
+ CPP="${CPP}" CPPFLAGS="${CPPFLAGS}" \
+ CXX="${CXX}" CXXFLAGS="${CXXFLAGS}" \
MANPREFIX="${MANPREFIX}"
# Add -fno-strict-aliasing to CFLAGS with optimization level -O2 or higher.
@@ -2292,7 +2302,7 @@
.else
.if defined(MAKE_JOBS_SAFE) || defined(FORCE_MAKE_JOBS)
MAKE_JOBS_NUMBER?= `${SYSCTL} -n kern.smp.cpus`
-_MAKE_JOBS= -j${MAKE_JOBS_NUMBER}
+_MAKE_JOBS?= -j${MAKE_JOBS_NUMBER}
.if defined(FORCE_MAKE_JOBS) && !defined(MAKE_JOBS_SAFE)
BUILD_FAIL_MESSAGE+= "You have chosen to use multiple make jobs (parallelization) for all ports. This port was not tested for this setting. Please remove FORCE_MAKE_JOBS and retry the build before reporting the failure to the maintainer."
.endif
@@ -2304,7 +2314,7 @@
.if exists(/usr/bin/fetch)
FETCH_BINARY?= /usr/bin/fetch
-FETCH_ARGS?= -ApRr
+FETCH_ARGS?= -AFpr
FETCH_REGET?= 1
.if !defined(DISABLE_SIZE)
FETCH_BEFORE_ARGS+= $${CKSIZE:+-S $$CKSIZE}
@@ -2378,6 +2388,8 @@
.endif
.if defined(USE_BZIP2)
EXTRACT_CMD?= ${BZIP2_CMD}
+.elif defined(USE_XZ)
+EXTRACT_CMD?= ${XZ_CMD}
.else
EXTRACT_CMD?= ${GZIP_CMD}
.endif
@@ -2416,6 +2428,8 @@
${INSTALL} ${COPY} ${STRIP} ${_BINOWNGRP} -m ${BINMODE}
INSTALL_KLD= \
${INSTALL} ${COPY} ${_BINOWNGRP} -m ${BINMODE}
+INSTALL_LIB= \
+ ${INSTALL} ${COPY} ${STRIP} ${_SHROWNGRP} -m ${SHAREMODE}
INSTALL_SCRIPT= \
${INSTALL} ${COPY} ${_BINOWNGRP} -m ${BINMODE}
INSTALL_DATA= \
@@ -2424,6 +2438,7 @@
${INSTALL} ${COPY} ${_MANOWNGRP} -m ${MANMODE}
INSTALL_MACROS= BSD_INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
+ BSD_INSTALL_LIB="${INSTALL_LIB}" \
BSD_INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
BSD_INSTALL_DATA="${INSTALL_DATA}" \
BSD_INSTALL_MAN="${INSTALL_MAN}"
@@ -2487,6 +2502,9 @@
.if defined(CONFLICTS) && !defined(DISABLE_CONFLICTS)
PKG_ARGS+= -C "${CONFLICTS}"
.endif
+.if defined(CONFLICTS_INSTALL) && !defined(DISABLE_CONFLICTS)
+PKG_ARGS+= -C "${CONFLICTS_INSTALL}"
+.endif
.endif
.if defined(PKG_NOCOMPRESS)
PKG_SUFX?= .tar
@@ -2501,6 +2519,9 @@
ALL_TARGET?= all
INSTALL_TARGET?= install
+# Integrate with the license auditing framework
+.include "${PORTSDIR}/Mk/bsd.licenses.mk"
+
# Popular master sites
.include "${PORTSDIR}/Mk/bsd.sites.mk"
@@ -2933,7 +2954,7 @@
VALID_CATEGORIES+= accessibility afterstep arabic archivers astro audio \
benchmarks biology cad chinese comms converters databases \
- deskutils devel docs dns editors elisp emulators finance french ftp \
+ deskutils devel docs dns editors elisp emulators enlightenment finance french ftp \
games geography german gnome gnustep graphics hamradio haskell hebrew hungarian \
ipv6 irc japanese java kde kld korean lang linux lisp \
mail math mbone misc multimedia net net-im net-mgmt net-p2p news \
@@ -3060,12 +3081,8 @@
@${FALSE}
.endif
_MLINKS= ${_MLINKS_PREPEND}
-# XXX 20040119 This next line should read:
-# .for lang in ${MANLANG:S%^%man/%:S%^man/""$%man%}
-# but there is currently a bug in make(1) that prevents the double-quote
-# substitution from working correctly. Once that problem is addressed,
-# and has had a enough time to mature, this hack should be removed.
-.for lang in ${MANLANG:S%^%man/%:S%^man/""$%man%:S%^man/"$%man%}
+
+.for lang in ${MANLANG:S%^%man/%:S%^man/""$%man%}
.for ___pmlinks in ${__pmlinks}
.for __lang in ${lang}
_MLINKS+= ${___pmlinks:S// /g}
@@ -3083,12 +3100,7 @@
.endif
.endfor
-# XXX 20040119 This next line should read:
-# .for manlang in ${MANLANG:S%^%man/%:S%^man/""$%man%}
-# but there is currently a bug in make(1) that prevents the double-quote
-# substitution from working correctly. Once that problem is addressed,
-# and has had a enough time to mature, this hack should be removed.
-.for manlang in ${MANLANG:S%^%man/%:S%^man/""$%man%:S%^man/"$%man%}
+.for manlang in ${MANLANG:S%^%man/%:S%^man/""$%man%}
.for sect in 1 2 3 4 5 6 7 8 9 L N
# MAN${sect} is for man pages installed for all languages in MANLANG for a given
@@ -3174,14 +3186,6 @@
_DESKTOPDIR_REL=
.endif
-# Put this as far down as possible so it will catch all PLIST_SUB definitions.
-
-.if defined(INSTALLS_SHLIB)
-LDCONFIG_DIRS?= %%PREFIX%%/lib
-LDCONFIG_PLIST!= ${ECHO_CMD} ${LDCONFIG_DIRS} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/}
-LDCONFIG_RUNLIST!= ${ECHO_CMD} ${LDCONFIG_PLIST} | ${SED} -e "s!%D!${PREFIX}!g"
-.endif
-
.MAIN: all
################################################################
@@ -3316,6 +3320,8 @@
# Clean directories for ftp or CDROM.
################################################################
+.if !defined(LICENSE)
+
.if defined(RESTRICTED)
clean-restricted: delete-distfiles delete-package
clean-restricted-list: delete-distfiles-list delete-package-list
@@ -3334,6 +3340,8 @@
clean-for-cdrom-list:
.endif
+.endif # !defined(LICENSE)
+
.if defined(ALL_HOOK)
all:
@cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTNAME=${DISTNAME} \
@@ -3398,9 +3406,9 @@
.endif
# Disable install
-.if defined(NO_INSTALL) && !target(install)
-install: build
- @${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
+.if defined(NO_INSTALL) && !target(do-install)
+do-install:
+ @${DO_NADA}
.endif
# Disable package
@@ -3429,8 +3437,6 @@
# Pre-everything
-# XXX MCL suggests deprecating this in favor of something
-# less likely to be abused by overloading
pre-everything::
@${DO_NADA}
@@ -3451,9 +3457,6 @@
.endif
.if defined(_OPTIONS_READ)
@${ECHO_MSG} "===> Found saved configuration for ${_OPTIONS_READ}"
-.if ${OPTIONSFILE} != ${OPTIONSFILE}
- @${ECHO_MSG} "===> *** CAUTION *** Using wrong configuration file ${OPTIONSFILE}"
-.endif
.endif
@@ -3492,7 +3495,7 @@
vlist=`${_EXTRACT_AUDITFILE} | ${GREP} "${PORTNAME}" | \
${AWK} -F\| ' /^[^#]/ { \
if (!system("${PKG_VERSION} -T \"${PKGNAME}\" \"" $$1 "\"")) \
- print "=> " $$3 ".\n Reference: <" $$2 ">" \
+ print "=> " $$3 ".\n Reference: " $$2 \
} \
'`; \
if [ -n "$$vlist" ]; then \
@@ -3506,10 +3509,10 @@
fi
.endif
-# set alg to any of SIZE, MD5, SHA256 (or any other checksum algorithm):
-DISTINFO_DATA?= if [ \( -n "${DISABLE_SIZE}" -a -n "${NO_CHECKSUM}" \) -o ! -f "${MD5_FILE}" ]; then exit; fi; \
+# set alg to any of SIZE, SHA256 (or any other checksum algorithm):
+DISTINFO_DATA?= if [ \( -n "${DISABLE_SIZE}" -a -n "${NO_CHECKSUM}" \) -o ! -f "${DISTINFO_FILE}" ]; then exit; fi; \
DIR=${DIST_SUBDIR}; ${AWK} -v alg=$$alg -v file=$${DIR:+$$DIR/}$${file} \
- '$$1 == alg && $$2 == "(" file ")" {print $$4}' ${MD5_FILE}
+ '$$1 == alg && $$2 == "(" file ")" {print $$4}' ${DISTINFO_FILE}
# Fetch
@@ -3540,11 +3543,11 @@
${ECHO_MSG} "=> Please correct this problem and try again."; \
exit 1; \
fi; \
- if [ -f ${MD5_FILE} -a "x${NO_CHECKSUM}" = "x" ]; then \
- _md5sum=`alg=MD5; ${DISTINFO_DATA}`; \
- if [ -z "$$_md5sum" ]; then \
- ${ECHO_MSG} "=> $${DIR:+$$DIR/}$$file is not in ${MD5_FILE}."; \
- ${ECHO_MSG} "=> Either ${MD5_FILE} is out of date, or"; \
+ if [ -f ${DISTINFO_FILE} -a "x${NO_CHECKSUM}" = "x" ]; then \
+ _sha256sum=`alg=SHA256; ${DISTINFO_DATA}`; \
+ if [ -z "$$_sha256sum" ]; then \
+ ${ECHO_MSG} "=> $${DIR:+$$DIR/}$$file is not in ${DISTINFO_FILE}."; \
+ ${ECHO_MSG} "=> Either ${DISTINFO_FILE} is out of date, or"; \
${ECHO_MSG} "=> $${DIR:+$$DIR/}$$file is spelled incorrectly."; \
exit 1; \
fi; \
@@ -3568,7 +3571,7 @@
SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \
fi; \
for site in `eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
- ${ECHO_MSG} "=> Attempting to fetch from $${site}."; \
+ ${ECHO_MSG} "=> Attempting to fetch $${site}$${file}"; \
CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \
case $${file} in \
*/*) ${MKDIR} $${file%/*}; \
@@ -3620,7 +3623,7 @@
SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \
fi; \
for site in `eval $$SORTED_PATCH_SITES_CMD_TMP`; do \
- ${ECHO_MSG} "=> Attempting to fetch from $${site}."; \
+ ${ECHO_MSG} "=> Attempting to fetch $${site}$${file}"; \
CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \
case $${file} in \
*/*) ${MKDIR} $${file%/*}; \
@@ -3743,6 +3746,11 @@
fi
.endif
+.if !target(configure-autotools)
+configure-autotools:
+ @${DO_NADA}
+.endif
+
.if !target(run-autotools)
run-autotools:
@${DO_NADA}
@@ -3769,10 +3777,11 @@
.if defined(HAS_CONFIGURE)
@(cd ${CONFIGURE_WRKSRC} && \
${SET_LATE_CONFIGURE_ARGS} \
- if ! ${SETENV} CC="${CC}" CXX="${CXX}" \
- CFLAGS="${CFLAGS}" CXXFLAGS="${CXXFLAGS}" \
+ if ! ${SETENV} CC="${CC}" CPP="${CPP}" CXX="${CXX}" \
+ CFLAGS="${CFLAGS}" CPPFLAGS="${CPPFLAGS}" CXXFLAGS="${CXXFLAGS}" \
INSTALL="/usr/bin/install -c ${_BINOWNGRP}" \
INSTALL_DATA="${INSTALL_DATA}" \
+ INSTALL_LIB="${INSTALL_LIB}" \
INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
${CONFIGURE_ENV} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}; then \
@@ -3812,9 +3821,92 @@
# Check conflicts
.if !target(check-conflicts)
-check-conflicts:
-.if defined(CONFLICTS) && !defined(DISABLE_CONFLICTS)
- @found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \
+check-conflicts: check-build-conflicts check-install-conflicts
+.endif
+
+.if !target(check-build-conflicts)
+check-build-conflicts:
+.if ( defined(CONFLICTS) || defined(CONFLICTS_BUILD) ) && !defined(DISABLE_CONFLICTS) && !defined(DEFER_CONFLICTS_CHECK)
+ @found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_BUILD:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \
+ conflicts_with=; \
+ for entry in $${found}; do \
+ if ${PKG_INFO} -e $${entry} ; then \
+ prfx=`${PKG_INFO} -q -p "$${entry}" 2> /dev/null | ${SED} -ne '1s/^@cwd //p'`; \
+ orgn=`${PKG_INFO} -q -o "$${entry}" 2> /dev/null`; \
+ if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \
+ conflicts_with="$${conflicts_with} $${entry}"; \
+ fi; \
+ fi; \
+ done; \
+ if [ -n "$${conflicts_with}" ]; then \
+ ${ECHO_MSG}; \
+ ${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): "; \
+ for entry in $${conflicts_with}; do \
+ ${ECHO_MSG} " $${entry}"; \
+ done; \
+ ${ECHO_MSG}; \
+ ${ECHO_MSG} " They will not build together."; \
+ ${ECHO_MSG} " Please remove them first with pkg_delete(1)."; \
+ exit 1; \
+ fi
+.endif
+.endif
+
+.if !target(identify-install-conflicts)
+identify-install-conflicts:
+.if ( defined(CONFLICTS) || defined(CONFLICTS_INSTALL) ) && !defined(DISABLE_CONFLICTS)
+ @found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_INSTALL:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \
+ conflicts_with=; \
+ for entry in $${found}; do \
+ if ${PKG_INFO} -e $${entry} ; then \
+ prfx=`${PKG_INFO} -q -p "$${entry}" 2> /dev/null | ${SED} -ne '1s/^@cwd //p'`; \
+ orgn=`${PKG_INFO} -q -o "$${entry}" 2> /dev/null`; \
+ if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \
+ conflicts_with="$${conflicts_with} $${entry}"; \
+ fi; \
+ fi; \
+ done; \
+ if [ -n "$${conflicts_with}" ]; then \
+ ${ECHO_MSG}; \
+ ${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): "; \
+ for entry in $${conflicts_with}; do \
+ ${ECHO_MSG} " $${entry}"; \
+ done; \
+ ${ECHO_MSG}; \
+ ${ECHO_MSG} " They install files into the same place."; \
+ ${ECHO_MSG} " You may want to stop build with Ctrl + C."; \
+ sleep 10; \
+ fi
+.endif
+.endif
+
+.if !target(check-install-conflicts)
+check-install-conflicts:
+.if ( defined(CONFLICTS) || defined(CONFLICTS_INSTALL) || ( defined(CONFLICTS_BUILD) && defined(DEFER_CONFLICTS_CHECK) ) ) && !defined(DISABLE_CONFLICTS)
+.if defined(DEFER_CONFLICTS_CHECK)
+ @found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_BUILD:C/.+/'&'/} ${CONFLICTS_INSTALL:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \
+ conflicts_with=; \
+ for entry in $${found}; do \
+ if ${PKG_INFO} -e $${entry} ; then \
+ prfx=`${PKG_INFO} -q -p "$${entry}" 2> /dev/null | ${SED} -ne '1s/^@cwd //p'`; \
+ orgn=`${PKG_INFO} -q -o "$${entry}" 2> /dev/null`; \
+ if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \
+ conflicts_with="$${conflicts_with} $${entry}"; \
+ fi; \
+ fi; \
+ done; \
+ if [ -n "$${conflicts_with}" ]; then \
+ ${ECHO_MSG}; \
+ ${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): "; \
+ for entry in $${conflicts_with}; do \
+ ${ECHO_MSG} " $${entry}"; \
+ done; \
+ ${ECHO_MSG}; \
+ ${ECHO_MSG} " Please remove them first with pkg_delete(1)."; \
+ exit 1; \
+ fi
+.else
+ @found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_INSTALL:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \
conflicts_with=; \
for entry in $${found}; do \
if ${PKG_INFO} -e $${entry} ; then \
@@ -3836,7 +3928,8 @@
${ECHO_MSG} " Please remove them first with pkg_delete(1)."; \
exit 1; \
fi
-.endif # CONFLICTS
+.endif # defined(DEFER_CONFLICTS_CHECK)
+.endif
.endif
# Install
@@ -3869,20 +3962,7 @@
fi; \
fi
@__softMAKEFLAGS='${__softMAKEFLAGS:S/'/'\''/g}'; \
- _LATE_PKG_ARGS=""; \
- if [ -f ${PKGINSTALL} ]; then \
- _LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -i ${PKGINSTALL}"; \
- fi; \
- if [ -f ${PKGDEINSTALL} ]; then \
- _LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -k ${PKGDEINSTALL}"; \
- fi; \
- if [ -f ${PKGREQ} ]; then \
- _LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -r ${PKGREQ}"; \
- fi; \
- if [ -f ${PKGMESSAGE} ]; then \
- _LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -D ${PKGMESSAGE}"; \
- fi; \
- if ${PKG_CMD} ${PKG_ARGS} ${PKGFILE}; then \
+ if ${PKG_CMD} -b ${PKGNAME} ${PKGFILE}; then \
if [ -d ${PACKAGES} ]; then \
cd ${.CURDIR} && eval ${MAKE} $${__softMAKEFLAGS} package-links; \
fi; \
@@ -4032,7 +4112,7 @@
.if !target(install-ldconfig-file)
install-ldconfig-file:
-.if defined(USE_LDCONFIG) || defined(USE_LDCONFIG32) || defined(INSTALLS_SHLIB)
+.if defined(USE_LDCONFIG) || defined(USE_LDCONFIG32)
.if defined(USE_LDCONFIG)
.if defined(USE_LINUX_PREFIX)
@${ECHO_MSG} "===> Running linux ldconfig"
@@ -4082,25 +4162,10 @@
.endif
.endif
.endif
-# This can be removed once all ports have been converted to USE_LDCONFIG.
.if defined(INSTALLS_SHLIB)
-.if defined(USE_LDCONFIG)
- @${ECHO_MSG} "===> INSTALLS_SHLIB and USE_LDCONFIG both defined."
-.endif
-.if defined(USE_LDCONFIG32)
- @${ECHO_MSG} "===> INSTALLS_SHLIB and USE_LDCONFIG32 both defined."
-.endif
-.if !defined(INSTALL_AS_USER)
- @${ECHO_MSG} "===> Running ldconfig"
- ${LDCONFIG_CMD}
-.else
- @${ECHO_MSG} "===> Running ldconfig (errors are ignored)"
- -${LDCONFIG_CMD}
+ @${ECHO_MSG} "INSTALLS_SHLIB is deprecated. Use USE_LDCONFIG instead."
.endif
.endif
-.else
- @${DO_NADA}
-.endif
.endif
.if !target(create-users-groups)
@@ -4338,32 +4403,34 @@
.endif
_SANITY_SEQ= ${_CHROOT_SEQ} pre-everything check-makefile \
check-categories check-makevars check-desktop-entries \
- check-conflicts check-depends check-deprecated \
- check-vulnerable buildanyway-message options-message
+ check-depends identify-install-conflicts check-deprecated \
+ check-vulnerable check-license buildanyway-message \
+ options-message
_FETCH_DEP= check-sanity
_FETCH_SEQ= fetch-depends pre-fetch pre-fetch-script \
do-fetch post-fetch post-fetch-script
_EXTRACT_DEP= fetch
-_EXTRACT_SEQ= extract-message checksum extract-depends pre-extract \
- pre-extract-script do-extract \
+_EXTRACT_SEQ= check-build-conflicts extract-message checksum extract-depends \
+ pre-extract pre-extract-script do-extract \
post-extract post-extract-script
_PATCH_DEP= extract
-_PATCH_SEQ= patch-message patch-depends patch-dos2unix pre-patch \
+_PATCH_SEQ= ask-license patch-message patch-depends patch-dos2unix pre-patch \
pre-patch-script do-patch post-patch post-patch-script
_CONFIGURE_DEP= patch
_CONFIGURE_SEQ= build-depends lib-depends configure-message \
- pre-configure pre-configure-script \
+ configure-autotools pre-configure pre-configure-script \
run-autotools do-configure post-configure post-configure-script
_BUILD_DEP= configure
_BUILD_SEQ= build-message pre-build pre-build-script do-build \
post-build post-build-script
_INSTALL_DEP= build
-_INSTALL_SEQ= install-message run-depends lib-depends apply-slist pre-install \
+_INSTALL_SEQ= install-message check-install-conflicts run-depends lib-depends apply-slist pre-install \
pre-install-script generate-plist check-already-installed
_INSTALL_SUSEQ= check-umask install-mtree pre-su-install \
pre-su-install-script create-users-groups do-install \
- install-desktop-entries post-install post-install-script \
- add-plist-info add-plist-docs add-plist-examples add-plist-data \
+ install-desktop-entries install-license \
+ post-install post-install-script add-plist-info \
+ add-plist-docs add-plist-examples add-plist-data \
add-plist-post install-rc-script compress-man \
install-ldconfig-file fake-pkg security-check
_PACKAGE_DEP= install
@@ -4756,7 +4823,7 @@
fi ; \
for site in `eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
DIR=${DIST_SUBDIR}; \
- CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
+ CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${DISTINFO_FILE} | ${AWK} '{print $$4}'`; \
case $${file} in \
*/*) args="-o $${file} $${site}$${file}";; \
*) args=$${site}$${file};; \
@@ -4787,7 +4854,7 @@
fi ; \
for site in `eval $$SORTED_PATCH_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
DIR=${DIST_SUBDIR}; \
- CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
+ CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${DISTINFO_FILE} | ${AWK} '{print $$4}'`; \
case $${file} in \
*/*) args="-o $${file} $${site}$${file}";; \
*) args=$${site}$${file};; \
@@ -4845,7 +4912,7 @@
makesum: check-checksum-algorithms
@cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} fetch NO_CHECKSUM=yes \
DISABLE_SIZE=yes
- @if [ -f ${MD5_FILE} ]; then ${CAT} /dev/null > ${MD5_FILE}; fi
+ @if [ -f ${DISTINFO_FILE} ]; then ${CAT} /dev/null > ${DISTINFO_FILE}; fi
@( \
cd ${DISTDIR}; \
\
@@ -4856,17 +4923,15 @@
eval alg_executable=\$$$$alg; \
\
if [ $$alg_executable != "NO" ]; then \
- $$alg_executable $$file >> ${MD5_FILE}; \
+ $$alg_executable $$file >> ${DISTINFO_FILE}; \
fi; \
done; \
- if [ -z "${NO_SIZE}" ]; then \
- ${ECHO_CMD} "SIZE ($$file) = "`${LS} -ALln $$file | ${AWK} '{print $$5}'` >> ${MD5_FILE}; \
- fi; \
+ ${ECHO_CMD} "SIZE ($$file) = "`${LS} -ALln $$file | ${AWK} '{print $$5}'` >> ${DISTINFO_FILE}; \
done \
)
@for file in ${_IGNOREFILES}; do \
for alg in ${CHECKSUM_ALGORITHMS:U}; do \
- ${ECHO_CMD} "$$alg ($$file) = IGNORE" >> ${MD5_FILE}; \
+ ${ECHO_CMD} "$$alg ($$file) = IGNORE" >> ${DISTINFO_FILE}; \
done; \
done
.endif
@@ -4874,7 +4939,7 @@
.if !target(checksum)
checksum: fetch check-checksum-algorithms
@${checksum_init} \
- if [ -f ${MD5_FILE} ]; then \
+ if [ -f ${DISTINFO_FILE} ]; then \
cd ${DISTDIR}; OK="";\
for file in ${_CKSUMFILES}; do \
ignored="true"; \
@@ -4978,7 +5043,7 @@
\
if [ "$$OK" != "true" -a ${FETCH_REGET} -eq 0 ]; then \
${ECHO_MSG} "===> Giving up on fetching files: $$refetchlist"; \
- ${ECHO_MSG} "Make sure the Makefile and distinfo file (${MD5_FILE})"; \
+ ${ECHO_MSG} "Make sure the Makefile and distinfo file (${DISTINFO_FILE})"; \
${ECHO_MSG} "are up to date. If you are absolutely sure you want to override this"; \
${ECHO_MSG} "check, type \"make NO_CHECKSUM=yes [other args]\"."; \
exit 1; \
@@ -4987,7 +5052,7 @@
exit 1; \
fi; \
elif [ -n "${_CKSUMFILES:M*}" ]; then \
- ${ECHO_MSG} "=> No checksum file (${MD5_FILE})."; \
+ ${ECHO_MSG} "=> No checksum file (${DISTINFO_FILE})."; \
fi
.endif
@@ -5374,7 +5439,7 @@
continue; \
fi;; \
esac; \
- echo cd $$dir; ${MAKE} $$targ; \
+ echo cd $$dir; cd $$dir; ${MAKE} $$targ; \
done
.if !target(fetch-required)
@@ -5494,8 +5559,13 @@
fi; \
done); \
for dir in ${_LIB_RUN_DEPENDS:C,[^:]*:([^:]*):?.*,\1,}; do \
- tmp=$${dir%/*}; \
- dir=$${tmp\#\#*/}/$${dir\#\#*/}; \
+ tmp=$${dir\#${PORTSDIR}/}; \
+ if [ "$$tmp" = "$$dir" ]; then \
+ tmp=$${dir%/*}; \
+ dir=$${tmp\#\#*/}/$${dir\#\#*/}; \
+ else \
+ dir=$$tmp; \
+ fi; \
set -- $$origins; \
while [ $$\# -gt 1 ]; do \
if [ ! -d "${PORTSDIR}/$$2" ]; then \
@@ -5532,11 +5602,11 @@
# Show missing dependiencies
missing:
- @for dir in $$(${ALL-DEPENDS-LIST}); do \
- THISORIGIN=$${dir##${PORTSDIR}/}; \
- installed=$$(${PKG_INFO} -qO $${THISORIGIN}); \
- if [ -z "$$installed" ]; then \
- ${ECHO_CMD} $$THISORIGIN; \
+ @_origins=$$(${PKG_INFO} -aoq); \
+ for dir in $$(${ALL-DEPENDS-LIST}); do \
+ _origin=$${dir##${PORTSDIR}/}; \
+ if ! $$(${ECHO_CMD} $${_origins} | ${GREP} -q $${_origin}); then \
+ ${ECHO_CMD} $${_origin}; \
fi; \
done
@@ -5555,9 +5625,6 @@
# If this ever changes, portmgr should contact the portsnap maintainer
# first to avoid gratuitous breakage.
-# XXX Older versions do not support the :u make modifier. The .else
-# clause can be removed once 6.3-RELEASE is no longer supported.
-.if ${OSVERSION} >= 603104
. if !target(describe)
_EXTRACT_DEPENDS=${EXTRACT_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u}
_PATCH_DEPENDS=${PATCH_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u}
@@ -5586,71 +5653,6 @@
esac; \
done < ${DESCR}; ${ECHO_CMD}
. endif
-.else
-. if !target(describe)
-describe:
- @${ECHO_CMD} -n "${PKGNAME}|${.CURDIR}|${PREFIX}|"
-. if defined(COMMENT)
- @${ECHO_CMD} -n ${COMMENT:Q}
-. else
- @${ECHO_CMD} -n '** No Description'
-. endif
- @perl -e ' \
- if ( -f q{${DESCR}} ) { \
- print q{|${DESCR}}; \
- } else { \
- print q{|/dev/null}; \
- } \
- print q{|${MAINTAINER}|${CATEGORIES}|}; \
- @edirs = map((split /:/)[1], split(q{ }, q{${EXTRACT_DEPENDS}})); \
- @pdirs = map((split /:/)[1], split(q{ }, q{${PATCH_DEPENDS}})); \
- @fdirs = map((split /:/)[1], split(q{ }, q{${FETCH_DEPENDS}})); \
- @bdirs = map((split /:/)[1], split(q{ }, q{${BUILD_DEPENDS}})); \
- @rdirs = map((split /:/)[1], split(q{ }, q{${RUN_DEPENDS}})); \
- @ldirs = map((split /:/)[1], split(q{ }, q{${LIB_DEPENDS}})); \
- for my $$i (\@edirs, \@pdirs, \@fdirs, \@bdirs, \@rdirs, \@ddirs, \@ldirs) { \
- my @dirs = @$$i; \
- @$$i = (); \
- for (@dirs) { \
- if (-d $$_) { \
- push @$$i, $$_; \
- } else { \
- print STDERR qq{${PKGNAME}: \"$$_\" non-existent -- dependency list incomplete\n}; \
- exit(1); \
- } \
- } \
- } \
- for (@edirs, @ddirs) { \
- $$xe{$$_} = 1; \
- } \
- print join(q{ }, sort keys %xe), q{|}; \
- for (@pdirs, @ddirs) { \
- $$xp{$$_} = 1; \
- } \
- print join(q{ }, sort keys %xp), q{|}; \
- for (@fdirs, @ddirs) { \
- $$xf{$$_} = 1; \
- } \
- print join(q{ }, sort keys %xf), q{|}; \
- for (@bdirs, @ddirs, @ldirs) { \
- $$xb{$$_} = 1; \
- } \
- print join(q{ }, sort keys %xb), q{|}; \
- for (@rdirs, @ddirs, @ldirs) { \
- $$xr{$$_} = 1; \
- } \
- print join(q{ }, sort keys %xr), q{|}; \
- if (open(DESCR, q{${DESCR}})) { \
- while (<DESCR>) { \
- if (/^WWW:\s+(\S+)/) { \
- print $$1; \
- last; \
- } \
- } \
- } \
- print qq{\n};'
-. endif
-.endif
www-site:
.if exists(${DESCR})
@@ -5775,23 +5777,20 @@
@if [ -f ${PLIST} ]; then \
${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} ${PLIST} >> ${TMPPLIST}; \
fi
-.for reinplace in ${PLIST_REINPLACE}
-.if defined(PLIST_REINPLACE_${reinplace:U})
- @${SED} -i "" -e '${PLIST_REINPLACE_${reinplace:U}}' ${TMPPLIST}
-.endif
-.endfor
.for dir in ${PLIST_DIRS}
@${ECHO_CMD} ${dir} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} -e 's,^, at dirrm ,' >> ${TMPPLIST}
.endfor
-# To be removed once INSTALLS_SHLIB has been eradicated.
-.if defined(INSTALLS_SHLIB) && !defined(INSTALL_AS_USER)
- @${ECHO_CMD} "@exec ${LDCONFIG_PLIST_EXEC_CMD}" >> ${TMPPLIST}
- @${ECHO_CMD} "@unexec ${LDCONFIG_PLIST_UNEXEC_CMD}" >> ${TMPPLIST}
-.elif defined(INSTALLS_SHLIB)
- @${ECHO_CMD} "@exec ${LDCONFIG_PLIST_EXEC_CMD} || ${TRUE}" >> ${TMPPLIST}
- @${ECHO_CMD} "@unexec ${LDCONFIG_PLIST_UNEXEC_CMD} || ${TRUE}" >> ${TMPPLIST}
+.for dir in ${PLIST_DIRSTRY}
+ @${ECHO_CMD} ${dir} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} -e 's,^, at dirrmtry ,' >> ${TMPPLIST}
+.endfor
+
+.for reinplace in ${PLIST_REINPLACE}
+.if defined(PLIST_REINPLACE_${reinplace:U})
+ @${SED} -i "" -e '${PLIST_REINPLACE_${reinplace:U}}' ${TMPPLIST}
.endif
+.endfor
+
.if defined(USE_LINUX_PREFIX)
.if defined(USE_LDCONFIG)
@${ECHO_CMD} "@exec ${LDCONFIG_CMD}" >> ${TMPPLIST}
@@ -5944,8 +5943,8 @@
@${ECHO_MSG} "===> Installing rc.d startup script(s)"
@${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}
@for i in ${USE_RC_SUBR}; do \
- ${INSTALL_SCRIPT} ${WRKDIR}/$${i} ${PREFIX}/etc/rc.d/$${i%.sh}${RC_SUBR_SUFFIX}; \
- ${ECHO_CMD} "etc/rc.d/$${i%.sh}${RC_SUBR_SUFFIX}" >> ${TMPPLIST}; \
+ ${INSTALL_SCRIPT} ${WRKDIR}/$${i} ${PREFIX}/etc/rc.d/$${i%.sh}; \
+ ${ECHO_CMD} "etc/rc.d/$${i%.sh}" >> ${TMPPLIST}; \
done
.endif
.else
@@ -6014,6 +6013,7 @@
fi; \
if [ -f ${PKGMESSAGE} ]; then \
${CP} ${PKGMESSAGE} ${PKG_DBDIR}/${PKGNAME}/+DISPLAY; \
+ ${ECHO_CMD} "@display +DISPLAY" >> ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \
fi; \
for dep in `${PKG_INFO} -qf ${PKGNAME} | ${AWK} '/^@pkgdep / {print $$2}' | ${SORT} -u`; do \
if [ -d ${PKG_DBDIR}/$$dep -a -z `${ECHO_CMD} $$dep | ${GREP} -E ${PKG_IGNORE_DEPENDS}` ]; then \
@@ -6074,10 +6074,6 @@
.if !defined(OPTIONS)
@${ECHO_MSG} "===> No options to configure"
.else
-.if ${OPTIONSFILE} != ${OPTIONSFILE}
- @${ECHO_MSG} "===> Using wrong configuration file ${OPTIONSFILE}"
- @exit 1
-.endif
.if ${UID} != 0 && !defined(INSTALL_AS_USER)
@optionsdir=${OPTIONSFILE}; optionsdir=$${optionsdir%/*}; \
${ECHO_MSG} "===> Switching to root credentials to create $${optionsdir}"; \
@@ -6105,7 +6101,7 @@
elif [ ! -z "$${withoutval}" ]; then \
val=off; \
else \
- val=$$3; \
+ val=$${defaultval}; \
fi; \
DEFOPTIONS="$${DEFOPTIONS} $$1 \"$$2\" $${val}"; \
shift 3; \
@@ -6210,7 +6206,7 @@
elif [ ! -z "$${withoutval}" ]; then \
val=off; \
else \
- val="$$3 (default)"; \
+ val="$${defaultval} (default)"; \
fi; \
${ECHO_MSG} " $$1=$${val} \"$$2\""; \
shift 3; \
@@ -6403,7 +6399,7 @@
${ECHO_CMD} "@cwd ${DESKTOPDIR}" >> ${TMPPLIST}; \
fi; \
while [ $$# -gt 6 ]; do \
- filename="$$4.desktop"; \
+ filename="`${ECHO_CMD} "$$4" | ${TR} -cd [:alnum:]`.desktop"; \
pathname="${DESKTOPDIR}/$$filename"; \
categories="$$5"; \
if [ -z "$$categories" ]; then \
@@ -6435,6 +6431,21 @@
.endif
.endif
+.if !target(check-license)
+check-license:
+ @${DO_NADA}
+.endif
+
+.if !target(ask-license)
+ask-license:
+ @${DO_NADA}
+.endif
+
+.if !target(install-license)
+install-license:
+ @${DO_NADA}
+.endif
+
.endif
# End of post-makefile section.
Modified: trunk/Mk/bsd.gecko.mk
==============================================================================
--- trunk/Mk/bsd.gecko.mk Tue Mar 15 14:16:11 2011 (r516)
+++ trunk/Mk/bsd.gecko.mk Wed Mar 16 23:10:05 2011 (r517)
@@ -4,7 +4,7 @@
# Date created: 12 Nov 2005
# Whom: Michael Johnson <ahze at FreeBSD.org>
#
-# $FreeBSD: ports/Mk/bsd.gecko.mk,v 1.25 2010/11/30 13:03:10 beat Exp $
+# $FreeBSD: ports/Mk/bsd.gecko.mk,v 1.26 2010/12/18 11:15:33 beat Exp $
#
# 4 column tabs prevent hair loss and tooth decay!
More information about the freebsd-gecko
mailing list