[Bug 191573] [zfs] kernel panic when running zpool/add/files.t
bugzilla-noreply at freebsd.org
bugzilla-noreply at freebsd.org
Fri Jul 18 03:25:08 UTC 2014
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=191573
--- Comment #11 from yaneurabeya at gmail.com ---
Slight correction. I meant 256GB of RAM.
db> show msgbuf
msgbufp = 0xfffff8403fffffb8
magic = 63062, size = 98232, r= 21200, w = 21678, ptr = 0xfffff8403ffe8000,
cksum= 1683664
Fatal trap 12: page fault while in kernel mode
cpuid = 6; apic id = 20
fault virtual address = 0x0
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80d1c5a6
stack pointer = 0x28:0xfffffe3fcf2090a0
frame pointer = 0x28:0xfffffe3fcf209110
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 1894 (zpool)
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 a32b4d9(master)-dirty: Thu Jul 17 03:09:09 PDT 2014
root at mina3020.localdomain:/usr/obj/scratch/freebsd/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
WARNING: WITNESS option enabled, expect reduced performance.
CPU: Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz (1995.24-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206d7 Family=0x6 Model=0x2d Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 274877906944 (262144 MB)
avail memory = 267130585088 (254755 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL S2600GL>
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 2 package(s) x 6 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 6
cpu4 (AP): APIC ID: 8
cpu5 (AP): APIC ID: 10
cpu6 (AP): APIC ID: 32
cpu7 (AP): APIC ID: 34
cpu8 (AP): APIC ID: 36
cpu9 (AP): APIC ID: 38
cpu10 (AP): APIC ID: 40
cpu11 (AP): APIC ID: 42
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using
default 16 (20130823/tbfadt-682)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <INTEL S2600GL> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, 9d000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 47 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 47 at device 1.1 on pci0
pci2: <ACPI PCI bus> on pcib2
igb0: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0x3060-0x307f
mem 0xd0b60000-0xd0b7ffff,0xd0bb0000-0xd0bb3fff irq 27 at device 0.0 on pci2
igb0: Using MSIX interrupts with 9 vectors
igb0: Ethernet address: 00:1e:67:6d:7a:0c
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: Bound queue 4 to cpu 4
igb0: Bound queue 5 to cpu 5
igb0: Bound queue 6 to cpu 6
igb0: Bound queue 7 to cpu 7
igb1: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0x3040-0x305f
mem 0xd0b40000-0xd0b5ffff,0xd0ba0000-0xd0ba3fff irq 30 at device 0.1 on pci2
igb1: Using MSIX interrupts with 9 vectors
igb1: Ethernet address: 00:1e:67:6d:7a:0d
igb1: Bound queue 0 to cpu 8
igb1: Bound queue 1 to cpu 9
igb1: Bound queue 2 to cpu 10
igb1: Bound queue 3 to cpu 11
igb1: Bound queue 4 to cpu 0
igb1: Bound queue 5 to cpu 1
igb1: Bound queue 6 to cpu 2
igb1: Bound queue 7 to cpu 3
igb2: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0x3020-0x303f
mem 0xd0b20000-0xd0b3ffff,0xd0b90000-0xd0b93fff irq 28 at device 0.2 on pci2
igb2: Using MSIX interrupts with 9 vectors
igb2: Ethernet address: 00:1e:67:6d:7a:0e
igb2: Bound queue 0 to cpu 4
igb2: Bound queue 1 to cpu 5
igb2: Bound queue 2 to cpu 6
igb2: Bound queue 3 to cpu 7
igb2: Bound queue 4 to cpu 8
igb2: Bound queue 5 to cpu 9
igb2: Bound queue 6 to cpu 10
igb2: Bound queue 7 to cpu 11
igb3: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0x3000-0x301f
mem 0xd0b00000-0xd0b1ffff,0xd0b80000-0xd0b83fff irq 29 at device 0.3 on pci2
igb3: Using MSIX interrupts with 9 vectors
igb3: Ethernet address: 00:1e:67:6d:7a:0f
igb3: Bound queue 0 to cpu 0
igb3: Bound queue 1 to cpu 1
igb3: Bound queue 2 to cpu 2
igb3: Bound queue 3 to cpu 3
igb3: Bound queue 4 to cpu 4
igb3: Bound queue 5 to cpu 5
igb3: Bound queue 6 to cpu 6
igb3: Bound queue 7 to cpu 7
pcib3: <ACPI PCI-PCI bridge> irq 47 at device 2.0 on pci0
pci4: <ACPI PCI bus> on pcib3
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port
0x2020-0x203f mem 0xd0e20000-0xd0e3ffff,0xd0e50000-0xd0e53fff irq 32 at device
0.0 on pci4
ix0: Using MSIX interrupts with 9 vectors
ix0: Bound queue 0 to cpu 0
ix0: Bound queue 1 to cpu 1
ix0: Bound queue 2 to cpu 2
ix0: Bound queue 3 to cpu 3
ix0: Bound queue 4 to cpu 4
ix0: Bound queue 5 to cpu 5
ix0: Bound queue 6 to cpu 6
ix0: Bound queue 7 to cpu 7
ix0: Ethernet address: 00:1e:67:5b:8b:f4
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port
0x2000-0x201f mem 0xd0e00000-0xd0e1ffff,0xd0e40000-0xd0e43fff irq 36 at device
0.1 on pci4
ix1: Using MSIX interrupts with 9 vectors
ix1: Bound queue 0 to cpu 0
ix1: Bound queue 1 to cpu 1
ix1: Bound queue 2 to cpu 2
ix1: Bound queue 3 to cpu 3
ix1: Bound queue 4 to cpu 4
ix1: Bound queue 5 to cpu 5
ix1: Bound queue 6 to cpu 6
ix1: Bound queue 7 to cpu 7
ix1: Ethernet address: 00:1e:67:5b:8b:f5
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
pcib4: <ACPI PCI-PCI bridge> irq 47 at device 2.2 on pci0
pci6: <ACPI PCI bus> on pcib4
mps0: <Intel(R) Integrated RAID Module RMS25JB080> port 0x1000-0x10ff mem
0xd0a40000-0xd0a4ffff,0xd0a00000-0xd0a3ffff irq 34 at device 0.0 on pci6
mps0: Firmware: 13.00.57.00, Driver: 16.00.00.00-fbsd
mps0: IOCCapabilities: 185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR>
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
pci7: <ACPI PCI bus> on pcib5
pci7: <network> at device 0.0 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0
pci8: <ACPI PCI bus> on pcib6
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0f20000-0xd0f203ff irq 22 at
device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci9: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci10: <ACPI PCI bus> on pcib8
vgapci0: <VGA-compatible display> mem
0xea000000-0xeaffffff,0xd0810000-0xd0813fff,0xd0000000-0xd07fffff irq 19 at
device 0.0 on pci10
vgapci0: Boot video device
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xd0f10000-0xd0f103ff irq 20 at
device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci11: <ACPI PCI bus> on pcib9
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port
0x4070-0x4077,0x4060-0x4063,0x4050-0x4057,0x4040-0x4043,0x4020-0x403f mem
0xd0f00000-0xd0f007ff irq 21 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib10: <ACPI Host-PCI bridge> on acpi0
pci128: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> irq 71 at device 1.0 on pci128
pci129: <ACPI PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> irq 71 at device 2.0 on pci128
pci130: <ACPI PCI bus> on pcib12
pcib13: <ACPI PCI-PCI bridge> irq 71 at device 3.0 on pci128
pci131: <ACPI PCI bus> on pcib13
pcib14: <ACPI PCI-PCI bridge> irq 71 at device 3.2 on pci128
pci132: <ACPI PCI bus> on pcib14
pcib15: <ACPI Host-PCI bridge> on acpi0
pci127: <ACPI PCI bus> on pcib15
pcib16: <ACPI Host-PCI bridge> on acpi0
pci255: <ACPI PCI bus> on pcib16
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est8: <Enhanced SpeedStep Frequency Control> on cpu8
est9: <Enhanced SpeedStep Frequency Control> on cpu9
est10: <Enhanced SpeedStep Frequency Control> on cpu10
est11: <Enhanced SpeedStep Frequency Control> on cpu11
Timecounters tick every 1.000 msec
random: unblocking device.
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen1.3: <American Megatrends Inc.> at usbus1
ukbd0: <Keyboard Interface> on usbus1
kbd0 at ukbd0
da0 at mps0 bus 0 scbus0 target 3 lun 0
da0: <HITACHI HUC10603 CLAR300 C330> Fixed Direct Access SCSI-6 device
da0: Serial Number PWHKHGPD
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
da1 at mps0 bus 0 scbus0 target 5 lun 0
da1: <HITACHI HUC10603 CLAR300 C330> Fixed Direct Access SCSI-6 device
da1: Serial Number PWHL87KF
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
ses0 at ahciem0 bus 0 scbus7 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
SMP: AP CPU #9 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 1995238860 Hz quality 1000
SMP: AP CPU #7 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 1995238860 Hz quality 1000
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/da0p2 [rw]...
...
lock order reversal:
1st 0xfffffe3e57ffcea8 bufwait (bufwait) @
/scratch/freebsd/sys/kern/vfs_bio.c:3088
2nd 0xfffff8009a9fcc00 dirhash (dirhash) @
/scratch/freebsd/sys/ufs/ufs/ufs_dirhash.c:284
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe3fcf065510
kdb_backtrace() at kdb_backtrace+0x39/frame 0xfffffe3fcf0655c0
witness_checkorder() at witness_checkorder+0xdc2/frame 0xfffffe3fcf065650
_sx_xlock() at _sx_xlock+0x75/frame 0xfffffe3fcf065690
ufsdirhash_remove() at ufsdirhash_remove+0x37/frame 0xfffffe3fcf0656c0
ufs_dirremove() at ufs_dirremove+0x11b/frame 0xfffffe3fcf065720
ufs_remove() at ufs_remove+0x75/frame 0xfffffe3fcf065780
VOP_REMOVE_APV() at VOP_REMOVE_APV+0xf7/frame 0xfffffe3fcf0657b0
kern_unlinkat() at kern_unlinkat+0x209/frame 0xfffffe3fcf0659a0
amd64_syscall() at amd64_syscall+0x25a/frame 0xfffffe3fcf065ab0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe3fcf065ab0
--- syscall (10, FreeBSD ELF64, sys_unlink), rip = 0x8014dd8aa, rsp =
0x7fffffffce58, rbp = 0x7fffffffcf10 ---
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
--
You are receiving this mail because:
You are the assignee for the bug.
More information about the freebsd-fs
mailing list