zpool upgrade does not work with latest 10 STABLE

[Dennis Glatting]

On Tue, 2014-07-15 at 17:17 +0200, Johan Hendriks wrote:
> Hello all.
> 
> Two days ago I upgraded my zpool to the latest version using zpool 
> upgrade. This worked fine. Today there where some new features added to 
> ZFS and I did rebuild the system. A zpool status shows me that the pool 
> can be upgraded.
> 


No problem on my side:


root at Tasha# uname -a
FreeBSD Tasha 10.0-STABLE FreeBSD 10.0-STABLE #0 r268669: Tue Jul 15
07:30:35 PDT 2014
root at Tasha:/disk-2/obj/disk-1/src/sys/SMUNI-FreeBSD10-amd64  amd64




root at Tasha# zpool status disk-2
  pool: disk-2
 state: ONLINE
  scan: scrub repaired 0 in 0h0m with 0 errors on Mon Jul  7 12:30:48
2014
config:

	NAME        STATE     READ WRITE CKSUM
	disk-2      ONLINE       0     0     0
	  mirror-0  ONLINE       0     0     0
	    da3     ONLINE       0     0     0
	    da0     ONLINE       0     0     0

errors: No known data errors









> beasty ~ # zpool list
> NAME      SIZE  ALLOC   FREE    CAP  DEDUP  HEALTH  ALTROOT
> storage  1.81T  1.06T   767G    58%  1.00x  ONLINE  -
> 
> beasty ~ # zpool status
>    pool: storage
>   state: ONLINE
> status: Some supported features are not enabled on the pool. The pool can
>      still be used, but some features are unavailable.
> action: Enable all features using 'zpool upgrade'. Once this is done,
>      the pool may no longer be accessible by software that does not support
>      the features. See zpool-features(7) for details.
>    scan: scrub repaired 0 in 2h28m with 0 errors on Tue Jul 15 13:57:56 2014
> config:
> 
>      NAME              STATE     READ WRITE CKSUM
>      storage           ONLINE       0     0     0
>        mirror-0        ONLINE       0     0     0
>          gpt/disk01    ONLINE       0     0     0
>          gpt/disk02    ONLINE       0     0     0
>        mirror-1        ONLINE       0     0     0
>          gpt/disk03    ONLINE       0     0     0
>          gpt/disk04-r  ONLINE       0     0     0
> 
> errors: No known data errors
> 
> beasty ~ # uname -a
> FreeBSD beasty.mydomain.local 10.0-STABLE FreeBSD 10.0-STABLE #0 
> r268604: Mon Jul 14 11:01:01 CEST 2014 
> root at beasty.mydomain.local:/usr/obj/usr/src/sys/KRNL  amd64
> 
> beasty ~ #  zpool upgrade
> This system supports ZFS pool feature flags.
> 
> All pools are formatted using feature flags.
> 
> Some supported features are not enabled on the following pools. Once a
> feature is enabled the pool may become incompatible with software
> that does not support the feature. See zpool-features(7) for details.
> 
> POOL  FEATURE
> ---------------
> storage
>        embedded_data
> 
> 
> But when i do a zpool upgrade it give me an error.
> 
> beasty ~ # zpool upgrade storage
> This system supports ZFS pool feature flags.
> 
> cannot set property for 'storage': invalid argument for this pool operation
> 
> 
> All things seem to work, and the scrub did a good job also....
> 
> Is there something I am missing?
> 
> regards
> Johan
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> freebsd-fs at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-fs
> To unsubscribe, send any mail to "freebsd-fs-unsubscribe at freebsd.org"