ZFS and Glabel
Jeremy Chadwick
jdc at koitsu.org
Sun Jun 9 06:54:48 UTC 2013
On Sat, Jun 08, 2013 at 09:46:18PM -0700, Reed A. Cartwright wrote:
> I'm looking at my dmesg.boot to figure out what settings I need to
> wire down my HDDs. I read the cam(4) documentation but I'm not sure I
> know what I'm doing. Any advice would be helpful.
>
> Let's assume that I want to wire everything down to their current
> positions, what should I put in loader.conf? I'll paste below some of
> my hardware configuration and lines from dmesg.boot that I think I
> need to look at.
>
> I have 4 LSI cards in the system: mps0, mps1, mps2, mps3.
>
> mps0: <LSI SAS2008> port 0xd000-0xd0ff mem
> 0xdff3c000-0xdff3ffff,0xdff40000-0xdff7ffff irq 24 at device 0.0 on
> pci5
> mps1: <LSI SAS2008> port 0xc000-0xc0ff mem
> 0xdfe3c000-0xdfe3ffff,0xdfe40000-0xdfe7ffff irq 44 at device 0.0 on
> pci4
> mps2: <LSI SAS2008> port 0xb000-0xb0ff mem
> 0xdfd3c000-0xdfd3ffff,0xdfd40000-0xdfd7ffff irq 32 at device 0.0 on
> pci3
> mps3: <LSI SAS2008> port 0xe000-0xe0ff mem
> 0xdbf3c000-0xdbf3ffff,0xdbf40000-0xdbf7ffff irq 56 at device 0.0 on
> pci65
>
> I have drives attached to two of those cards:
>
> da0 at mps0 bus 0 scbus0 target 0 lun 0
> da1 at mps0 bus 0 scbus0 target 1 lun 0
> da2 at mps0 bus 0 scbus0 target 2 lun 0
> da3 at mps0 bus 0 scbus0 target 3 lun 0
> da4 at mps0 bus 0 scbus0 target 4 lun 0
> da5 at mps0 bus 0 scbus0 target 5 lun 0
> da6 at mps0 bus 0 scbus0 target 6 lun 0
> da7 at mps0 bus 0 scbus0 target 7 lun 0
> da8 at mps3 bus 0 scbus9 target 0 lun 0
> da9 at mps3 bus 0 scbus9 target 1 lun 0
> da10 at mps3 bus 0 scbus9 target 2 lun 0
> da11 at mps3 bus 0 scbus9 target 3 lun 0
> da12 at mps3 bus 0 scbus9 target 4 lun 0
>
> {snip}
As usual, the situation is insane because you have so many controllers
on the system (more than just mps(4)) -- specifically 11 separate
controllers or systems using CAM (hence scbus0 to scbus10).
Below is for mps(4). If you want to wire down ahci(4), things are
a bit different, but you can read this post of mine:
http://lists.freebsd.org/pipermail/freebsd-stable/2013-January/071851.html
Enjoy:
hint.scbus.0.at="mps0"
hint.scbus.1.at="mps1"
hint.scbus.2.at="mps2"
hint.scbus.9.at="mps3"
hint.da.0.at="scbus0"
hint.da.1.at="scbus0"
hint.da.2.at="scbus0"
hint.da.3.at="scbus0"
hint.da.4.at="scbus0"
hint.da.5.at="scbus0"
hint.da.6.at="scbus0"
hint.da.7.at="scbus0"
hint.da.8.at="scbus9"
hint.da.9.at="scbus9"
hint.da.10.at="scbus9"
hint.da.11.at="scbus9"
hint.da.12.at="scbus9"
hint.da.13.at="scbus9"
hint.da.14.at="scbus9"
hint.da.15.at="scbus9"
hint.da.16.at="scbus1"
hint.da.17.at="scbus1"
hint.da.18.at="scbus1"
hint.da.19.at="scbus1"
hint.da.20.at="scbus1"
hint.da.21.at="scbus1"
hint.da.22.at="scbus1"
hint.da.23.at="scbus1"
hint.da.24.at="scbus2"
hint.da.25.at="scbus2"
hint.da.26.at="scbus2"
hint.da.27.at="scbus2"
hint.da.28.at="scbus2"
hint.da.29.at="scbus2"
hint.da.30.at="scbus2"
hint.da.31.at="scbus2"
hint.da.0.target="0"
hint.da.1.target="1"
hint.da.2.target="2"
hint.da.3.target="3"
hint.da.4.target="4"
hint.da.5.target="5"
hint.da.6.target="6"
hint.da.7.target="7"
hint.da.8.target="0"
hint.da.9.target="1"
hint.da.10.target="2"
hint.da.11.target="3"
hint.da.12.target="4"
hint.da.13.target="5"
hint.da.14.target="6"
hint.da.15.target="7"
hint.da.16.target="0"
hint.da.17.target="1"
hint.da.18.target="2"
hint.da.19.target="3"
hint.da.20.target="4"
hint.da.21.target="5"
hint.da.22.target="6"
hint.da.23.target="7"
hint.da.24.target="0"
hint.da.25.target="1"
hint.da.26.target="2"
hint.da.27.target="3"
hint.da.28.target="4"
hint.da.29.target="5"
hint.da.30.target="6"
hint.da.31.target="7"
--
| Jeremy Chadwick jdc at koitsu.org |
| UNIX Systems Administrator http://jdc.koitsu.org/ |
| Making life hard for others since 1977. PGP 4BD6C0CB |
More information about the freebsd-fs
mailing list