FreeBSD 9 and gmirror /geom raid

[Freddie Cash]

On Wed, Mar 7, 2012 at 6:14 AM, Davide D'Amico
<davide.damico at contactlab.com> wrote:
> Hi, I have a server DELL R210 with two sata drives:
> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
> ada0: <SAMSUNG HE253GJ 1AJ30001> ATA-8 SATA 2.x device
> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada0: Command Queueing enabled
> ada0: 238418MB (488281250 512 byte sectors: 16H 63S/T 16383C)
> ada0: Previously was known as ad4
> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
> ada1: <SAMSUNG HE253GJ 1AJ30001> ATA-8 SATA 2.x device
> ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada1: Command Queueing enabled
> ada1: 238418MB (488281250 512 byte sectors: 16H 63S/T 16383C)
> ada1: Previously was known as ad6
>
> Previously (8.x) - when I didn't use a hw raid - I used to install freebsd
> in a drive (i.e. ad4), boot from it and then:
>
> # sysctl kern.geom.debugflags=16
> # gmirror label -v -b round-robin data ad4
> # gmirror insert data ad6
> // Modification to /etc/fstab
> // reboot
>
> How could accomplish to the same task with 9.0-RELEASE?

http://people.freebsd.org/~rse/mirror/

-- 
Freddie Cash
fjwcash at gmail.com