Errors (ZFS) with Supmermicro AOC-USAS2-L8e
Dennis Glatting
freebsd at pki2.com
Mon Nov 21 20:48:19 UTC 2011
On Mon, 2011-11-21 at 09:48 -0700, Dennis Glatting wrote:
> Below
>
I forgot to mention that these are two separate AOC-USAS2-L8e boards in
two different systems, both flashed with the same firmware. Both systems
have an AOC-USAS2-L8e and a LSI 9211-8i but motherboard, processor,
memory, etc are different.
> On Mon, 21 Nov 2011, Jeremy Chadwick wrote:
>
> > On Mon, Nov 21, 2011 at 09:10:54AM -0700, Dennis Glatting wrote:
> >> I have two of those boards flashed with IT and on both I see reset
> >> notices. I also have an LSI 9211-8i in both systems flashed to IT and do
> >> not see resets. Both handle ZFS volumes.
> >>
> >> Clearly I've missed something. Any idea what to look at?
> >>
> >>
> >> mps1: <LSI SAS2008> port 0xee00-0xeeff mem
> >> 0xfbefc000-0xfbefffff,0xfbe80000-0xfbebffff irq 16 at device 0.0 on pci6
> >> mps1: Firmware: 11.00.00.00
> >> mps1: IOCCapabilities:
> >> 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
> >> mps1: [ITHREAD]
> >> da5 at mps1 bus 0 scbus10 target 0 lun 0
> >> da6 at mps1 bus 0 scbus10 target 1 lun 0
> >> da7 at mps1 bus 0 scbus10 target 2 lun 0
> >> da8 at mps1 bus 0 scbus10 target 3 lun 0
> >> da9 at mps1 bus 0 scbus10 target 6 lun 0
> >> da10 at mps1 bus 0 scbus10 target 7 lun 0
> >> (da7:mps1:0:2:0): READ(10). CDB: 28 0 3 33 c6 f5 0 0 1 0
> >> (da7:mps1:0:2:0): CAM status: SCSI Status Error
> >> (da7:mps1:0:2:0): SCSI status: Check Condition
> >> (da7:mps1:0:2:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset,
> >> or bus device reset occurred)
> >> (da5:mps1:0:0:0): READ(10). CDB: 28 0 3 33 c6 f5 0 0 1 0
> >> (da5:mps1:0:0:0): CAM status: SCSI Status Error
> >> (da5:mps1:0:0:0): SCSI status: Check Condition
> >> (da5:mps1:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset,
> >> or bus device reset occurred)
> >> (da9:mps1:0:6:0): READ(10). CDB: 28 0 3 33 c6 f5 0 0 1 0
> >> (da9:mps1:0:6:0): CAM status: SCSI Status Error
> >> (da9:mps1:0:6:0): SCSI status: Check Condition
> >> (da9:mps1:0:6:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset,
> >> or bus device reset occurred)
> >> (da8:mps1:0:3:0): READ(10). CDB: 28 0 4 97 a a3 0 0 1 0
> >> (da8:mps1:0:3:0): CAM status: SCSI Status Error
> >> (da8:mps1:0:3:0): SCSI status: Check Condition
> >> (da8:mps1:0:3:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset,
> >> or bus device reset occurred)
> >
> > uname -a please, as we need to know what kernel version and build date
> > of the system you're using. Thanks.
> >
>
> iirc> uname -a
> FreeBSD iirc 8.2-STABLE FreeBSD 8.2-STABLE #36: Fri Nov 18 04:26:35 PST
> 2011 root at iirc:/disk-1/src/sys/amd64/compile/IIRC amd64
>
>
> iirc> zpool status
> pool: disk-1
> state: ONLINE
> scan: scrub repaired 0 in 0h41m with 0 errors on Thu Nov 17 23:37:20 2011
> config:
>
> NAME STATE READ WRITE CKSUM
> disk-1 ONLINE 0 0 0
> raidz1-0 ONLINE 0 0 0
> da1 ONLINE 0 0 0
> da6 ONLINE 0 0 0
> da2 ONLINE 0 0 0
> da4 ONLINE 0 0 0
> da9 ONLINE 0 0 0
> da7 ONLINE 0 0 0
> da10 ONLINE 0 0 0
> da5 ONLINE 0 0 0
> da8 ONLINE 0 0 0
> da3 ONLINE 0 0 0
> cache
> ada0 ONLINE 0 0 0
>
> errors: No known data errors
>
> pool: disk-2
> state: ONLINE
> scan: scrub repaired 0 in 0h3m with 0 errors on Thu Oct 27 23:41:37 2011
> config:
>
> NAME STATE READ WRITE CKSUM
> disk-2 ONLINE 0 0 0
> ada3 ONLINE 0 0 0
> ada2 ONLINE 0 0 0
> cache
> ada1 ONLINE 0 0 0
>
> errors: No known data errors
>
>
> iirc> dmesg
> Copyright (c) 1992-2011 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 8.2-STABLE #36: Fri Nov 18 04:26:35 PST 2011
> root at iirc:/disk-1/src/sys/amd64/compile/IIRC amd64
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Core(TM) i7 CPU 940 @ 2.93GHz (2981.09-MHz K8-class
> CPU)
> Origin = "GenuineIntel" Id = 0x106a4 Family = 6 Model = 1a Stepping
> = 4
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>
> Features2=0x98e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
> AMD Features2=0x1<LAHF>
> TSC: P-state invariant
> real memory = 25769803776 (24576 MB)
> avail memory = 24825692160 (23675 MB)
> ACPI APIC Table: <GBT GBTUACPI>
> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
> FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> cpu2 (AP): APIC ID: 2
> cpu3 (AP): APIC ID: 3
> cpu4 (AP): APIC ID: 4
> cpu5 (AP): APIC ID: 5
> cpu6 (AP): APIC ID: 6
> cpu7 (AP): APIC ID: 7
> ioapic0: Changing APIC ID to 2
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> acpi0: <GBT GBTUACPI> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, dfdd0000 (3) failed
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> cpu2: <ACPI CPU> on acpi0
> cpu3: <ACPI CPU> on acpi0
> cpu4: <ACPI CPU> on acpi0
> cpu5: <ACPI CPU> on acpi0
> cpu6: <ACPI CPU> on acpi0
> cpu7: <ACPI CPU> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> ahci0: <Marvell 88SE9128 AHCI SATA controller> port
> 0xdf00-0xdf07,0xde00-0xde03,0xdd00-0xdd07,0xdc00-0xdc03,0xdb00-0xdb0f mem
> 0xfbdff000-0xfbdff7ff irq 16 at device 0.0 on pci1
> ahci0: [ITHREAD]
> ahci0: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported
> ahcich0: <AHCI channel> at channel 0 on ahci0
> ahcich0: [ITHREAD]
> ahcich1: <AHCI channel> at channel 1 on ahci0
> ahcich1: [ITHREAD]
> ahcich2: <AHCI channel> at channel 2 on ahci0
> ahcich2: [ITHREAD]
> ahcich3: <AHCI channel> at channel 3 on ahci0
> ahcich3: [ITHREAD]
> ahcich4: <AHCI channel> at channel 4 on ahci0
> ahcich4: [ITHREAD]
> ahcich5: <AHCI channel> at channel 5 on ahci0
> ahcich5: [ITHREAD]
> ahcich6: <AHCI channel> at channel 6 on ahci0
> ahcich6: [ITHREAD]
> ahcich7: <AHCI channel> at channel 7 on ahci0
> ahcich7: [ITHREAD]
> pcib2: <PCI-PCI bridge> irq 16 at device 2.0 on pci0
> pci2: <PCI bus> on pcib2
> xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfbcfe000-0xfbcfffff irq
> 16 at device 0.0 on pci2
> xhci0: [ITHREAD]
> xhci0: 32 byte context size.
> usbus0 on xhci0
> pcib3: <PCI-PCI bridge> irq 16 at device 3.0 on pci0
> pci3: <PCI bus> on pcib3
> vgapci0: <VGA-compatible display> port 0xce00-0xceff mem
> 0xe0000000-0xefffffff,0xfb8c0000-0xfb8dffff irq 16 at device 0.0 on pci3
> pci3: <multimedia, HDA> at device 0.1 (no driver attached)
> pcib4: <PCI-PCI bridge> irq 16 at device 5.0 on pci0
> pci4: <PCI bus> on pcib4
> arcmsr0: <Areca SAS 6G Host Adapter RAID Controller (RAID6 capable)
> > port 0xbe00-0xbeff mem 0xfb7f0000-0xfb7fffff,0xfb780000-0xfb7bffff irq
> 16 at device 0.0 on pci4
> ARECA RAID ADAPTER0: Driver Version 1.20.00.22 2011-07-04
> ARECA RAID ADAPTER0: FIRMWARE VERSION V1.49 2011-08-02
> arcmsr0: [ITHREAD]
> pcib5: <PCI-PCI bridge> irq 16 at device 7.0 on pci0
> pci5: <PCI bus> on pcib5
> mps0: <LSI SAS2008> port 0x7e00-0x7eff mem
> 0xfb6fc000-0xfb6fffff,0xfb680000-0xfb6bffff irq 16 at device 0.0 on pci5
> mps0: Firmware: 07.00.00.00
> mps0: IOCCapabilities:
> 185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR>
> mps0: [ITHREAD]
> pcib6: <PCI-PCI bridge> irq 16 at device 9.0 on pci0
> pci6: <PCI bus> on pcib6
> mps1: <LSI SAS2008> port 0xee00-0xeeff mem
> 0xfbefc000-0xfbefffff,0xfbe80000-0xfbebffff irq 16 at device 0.0 on pci6
> mps1: Firmware: 11.00.00.00
> mps1: IOCCapabilities:
> 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
> mps1: [ITHREAD]
> pci0: <base peripheral, interrupt controller> at device 16.0 (no driver
> attached)
> pci0: <base peripheral, interrupt controller> at device 16.1 (no driver
> attached)
> pci0: <base peripheral, interrupt controller> at device 17.0 (no driver
> attached)
> pci0: <base peripheral, interrupt controller> at device 17.1 (no driver
> attached)
> pci0: <base peripheral, interrupt controller> at device 20.0 (no driver
> attached)
> pci0: <base peripheral, interrupt controller> at device 20.1 (no driver
> attached)
> pci0: <base peripheral, interrupt controller> at device 20.2 (no driver
> attached)
> uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xff00-0xff1f irq
> 16 at device 26.0 on pci0
> uhci0: [ITHREAD]
> uhci0: LegSup = 0x2f00
> usbus1: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0
> uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xfe00-0xfe1f irq
> 21 at device 26.1 on pci0
> uhci1: [ITHREAD]
> uhci1: LegSup = 0x2f00
> usbus2: <Intel 82801JI (ICH10) USB controller USB-E> on uhci1
> uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xfd00-0xfd1f irq
> 18 at device 26.2 on pci0
> uhci2: [ITHREAD]
> uhci2: LegSup = 0x2f00
> usbus3: <Intel 82801JI (ICH10) USB controller USB-F> on uhci2
> ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem
> 0xfbffe000-0xfbffe3ff irq 18 at device 26.7 on pci0
> ehci0: [ITHREAD]
> usbus4: EHCI version 1.0
> usbus4: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0
> pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
> pci7: <ACPI PCI bus> on pcib7
> em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0xaf00-0xaf1f mem
> 0xfbbc0000-0xfbbdffff,0xfbb00000-0xfbb7ffff,0xfbbfc000-0xfbbfffff irq 16
> at device 0.0 on pci7
> em0: Using MSIX interrupts with 3 vectors
> em0: [ITHREAD]
> em0: [ITHREAD]
> em0: [ITHREAD]
> em0: Ethernet address: 00:1b:21:c1:aa:97
> pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
> pci8: <ACPI PCI bus> on pcib8
> re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port
> 0x9e00-0x9eff mem 0xfbaff000-0xfbafffff,0xfbaf8000-0xfbafbfff irq 16 at
> device 0.0 on pci8
> re0: Using 1 MSI-X message
> re0: Chip rev. 0x2c000000
> re0: MAC rev. 0x00000000
> miibus0: <MII bus> on re0
> rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
> rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
> 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
> 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
> 1000baseT-FDX-flow-master, auto, auto-flow
> re0: Ethernet address: 1c:6f:65:3e:ee:50
> re0: [ITHREAD]
> pcib9: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
> pci9: <ACPI PCI bus> on pcib9
> re1: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port
> 0x8e00-0x8eff mem 0xfb9ff000-0xfb9fffff,0xfb9f8000-0xfb9fbfff irq 17 at
> device 0.0 on pci9
> re1: Using 1 MSI-X message
> re1: Chip rev. 0x2c000000
> re1: MAC rev. 0x00000000
> miibus1: <MII bus> on re1
> rgephy1: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1
> rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
> 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
> 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
> 1000baseT-FDX-flow-master, auto, auto-flow
> re1: Ethernet address: 1c:6f:65:3e:ee:60
> re1: [ITHREAD]
> uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xfc00-0xfc1f irq
> 23 at device 29.0 on pci0
> uhci3: [ITHREAD]
> usbus5: <Intel 82801JI (ICH10) USB controller USB-A> on uhci3
> uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xfb00-0xfb1f irq
> 19 at device 29.1 on pci0
> uhci4: [ITHREAD]
> usbus6: <Intel 82801JI (ICH10) USB controller USB-B> on uhci4
> uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xfa00-0xfa1f irq
> 18 at device 29.2 on pci0
> uhci5: [ITHREAD]
> usbus7: <Intel 82801JI (ICH10) USB controller USB-C> on uhci5
> ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem
> 0xfbffd000-0xfbffd3ff irq 23 at device 29.7 on pci0
> ehci1: [ITHREAD]
> usbus8: EHCI version 1.0
> usbus8: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1
> pcib10: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci10: <ACPI PCI bus> on pcib10
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> ahci1: <Intel ICH10 AHCI SATA controller> port
> 0xf900-0xf907,0xf800-0xf803,0xf700-0xf707,0xf600-0xf603,0xf500-0xf51f mem
> 0xfbffc000-0xfbffc7ff irq 19 at device 31.2 on pci0
> ahci1: [ITHREAD]
> ahci1: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
> ahcich8: <AHCI channel> at channel 0 on ahci1
> ahcich8: [ITHREAD]
> ahcich9: <AHCI channel> at channel 1 on ahci1
> ahcich9: [ITHREAD]
> ahcich10: <AHCI channel> at channel 2 on ahci1
> ahcich10: [ITHREAD]
> ahcich11: <AHCI channel> at channel 3 on ahci1
> ahcich11: [ITHREAD]
> ahcich12: <AHCI channel> at channel 4 on ahci1
> ahcich12: [ITHREAD]
> ahcich13: <AHCI channel> at channel 5 on ahci1
> ahcich13: [ITHREAD]
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq
> 0,8 on acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 900
> atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
> qpi0: <QPI system bus> on motherboard
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xdb000-0xdbfff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> ppc0: cannot reserve I/O port range
> coretemp0: <CPU On-Die Thermal Sensors> on cpu0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> coretemp1: <CPU On-Die Thermal Sensors> on cpu1
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> coretemp2: <CPU On-Die Thermal Sensors> on cpu2
> est2: <Enhanced SpeedStep Frequency Control> on cpu2
> p4tcc2: <CPU Frequency Thermal Control> on cpu2
> coretemp3: <CPU On-Die Thermal Sensors> on cpu3
> est3: <Enhanced SpeedStep Frequency Control> on cpu3
> p4tcc3: <CPU Frequency Thermal Control> on cpu3
> coretemp4: <CPU On-Die Thermal Sensors> on cpu4
> est4: <Enhanced SpeedStep Frequency Control> on cpu4
> p4tcc4: <CPU Frequency Thermal Control> on cpu4
> coretemp5: <CPU On-Die Thermal Sensors> on cpu5
> est5: <Enhanced SpeedStep Frequency Control> on cpu5
> p4tcc5: <CPU Frequency Thermal Control> on cpu5
> coretemp6: <CPU On-Die Thermal Sensors> on cpu6
> est6: <Enhanced SpeedStep Frequency Control> on cpu6
> p4tcc6: <CPU Frequency Thermal Control> on cpu6
> coretemp7: <CPU On-Die Thermal Sensors> on cpu7
> est7: <Enhanced SpeedStep Frequency Control> on cpu7
> p4tcc7: <CPU Frequency Thermal Control> on cpu7
> Timecounters tick every 1.000 msec
> usbus0: 5.0Gbps Super Speed USB v3.0
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 12Mbps Full Speed USB v1.0
> usbus3: 12Mbps Full Speed USB v1.0
> usbus4: 480Mbps High Speed USB v2.0
> usbus5: 12Mbps Full Speed USB v1.0
> usbus6: 12Mbps Full Speed USB v1.0
> usbus7: 12Mbps Full Speed USB v1.0
> usbus8: 480Mbps High Speed USB v2.0
> ugen0.1: <0x1033> at usbus0
> uhub0: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
> ugen1.1: <Intel> at usbus1
> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> ugen2.1: <Intel> at usbus2
> uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> ugen3.1: <Intel> at usbus3
> uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
> ugen4.1: <Intel> at usbus4
> uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
> ugen5.1: <Intel> at usbus5
> uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
> ugen6.1: <Intel> at usbus6
> uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
> ugen7.1: <Intel> at usbus7
> uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
> ugen8.1: <Intel> at usbus8
> uhub8: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8
> uhub0: 4 ports with 4 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> uhub2: 2 ports with 2 removable, self powered
> uhub3: 2 ports with 2 removable, self powered
> uhub5: 2 ports with 2 removable, self powered
> uhub6: 2 ports with 2 removable, self powered
> uhub7: 2 ports with 2 removable, self powered
> uhub4: 6 ports with 6 removable, self powered
> uhub8: 6 ports with 6 removable, self powered
> ugen1.2: <Microsoft> at usbus1
> ums0: <Microsoft Microsoft 3-Button Mouse with IntelliEyeTM, class 0/0,
> rev 1.10/3.00, addr 2> on usbus1
> ums0: 3 buttons and [XYZ] coordinates ID=0
> ugen2.2: <USB> at usbus2
> ukbd0: <USB USB Keykoard, class 0/0, rev 1.10/1.10, addr 2> on usbus2
> ugen3.2: <CPS> at usbus3
> kbd2 at ukbd0
> uhid0: <USB USB Keykoard, class 0/0, rev 1.10/1.10, addr 2> on usbus2
> ahcich7: Poll timeout on slot 0 port 0
> ahcich7: is 00000000 cs 00000001 ss 00000000 rs 00000001 tfd 50 serr
> 00000000 cmd 10004016
> ada0 at ahcich8 bus 0 scbus11 target 0 lun 0
> ada0: <OCZ-AGILITY2 1.33> ATA-8 SATA 2.x device
> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada0: Command Queueing enabled
> ada0: 57241MB (117231408 512 byte sectors: 16H 63S/T 16383C)
> ada1 at ahcich9 bus 0 scbus12 target 0 lun 0
> ada1: <OCZ-AGILITY2 1.33> ATA-8 SATA 2.x device
> ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada1: Command Queueing enabled
> ada1: 57241MB (117231408 512 byte sectors: 16H 63S/T 16383C)
> ada2 at ahcich10 bus 0 scbus13 target 0 lun 0
> ada2: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device
> ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada2: Command Queueing enabled
> ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
> ada3 at ahcich11 bus 0 scbus14 target 0 lun 0
> ada3: <ST2000DL003-9VT166 CC32> ATA-8 SATA 3.x device
> ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada3: Command Queueing enabled
> ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
> da0 at arcmsr0 bus 0 scbus8 target 0 lun 0
> da0: <Areca OS R001> Fixed Direct Access SCSI-5 device
> da0: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit)
> da0: Command Queueing enabled
> da0: 953869MB (1953523712 512 byte sectors: 255H 63S/T 121601C)
> da1 at mps0 bus 0 scbus9 target 0 lun 0
> da1: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-5 device
> da1: 300.000MB/s transfers
> da1: Command Queueing enabled
> da1: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da2 at mps0 bus 0 scbus9 target 1 lun 0
> da2: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-5 device
> da2: 300.000MB/s transfers
> da2: Command Queueing enabled
> da2: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da3 at mps0 bus 0 scbus9 target 2 lun 0
> da3: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-5 device
> da3: 300.000MB/s transfers
> da3: Command Queueing enabled
> da3: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da4 at mps0 bus 0 scbus9 target 3 lun 0
> da4: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-5 device
> da4: 300.000MB/s transfers
> da4: Command Queueing enabled
> da4: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da5 at mps1 bus 0 scbus10 target 0 lun 0
> da5: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device
> da5: 300.000MB/s transfers
> da5: Command Queueing enabled
> da5: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da6 at mps1 bus 0 scbus10 target 1 lun 0
> da6: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device
> da6: 300.000MB/s transfers
> da6: Command Queueing enabled
> da6: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da7 at mps1 bus 0 scbus10 target 2 lun 0
> da7: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device
> da7: 300.000MB/s transfers
> da7: Command Queueing enabled
> da7: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da8 at mps1 bus 0 scbus10 target 3 lun 0
> da8: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device
> da8: 300.000MB/s transfers
> da8: Command Queueing enabled
> da8: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da9 at mps1 bus 0 scbus10 target 6 lun 0
> da9: <ATA ST2000DL003-9VT1 CC32> Fixed Direct Access SCSI-6 device
> da9: 600.000MB/s transfers
> da9: Command Queueing enabled
> da9: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da10 at mps1 bus 0 scbus10 target 7 lun 0
> da10: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device
> da10: 300.000MB/s transfers
> da10: Command Queueing enabled
> da10: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> pass1 at arcmsr0 bus 0 scbus8 target 16 lun 0
> pass1: <Areca RAID controller R001> Fixed Processor SCSI-0 device
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #7 Launched!
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #4 Launched!
> SMP: AP CPU #3 Launched!
> SMP: AP CPU #5 Launched!
> SMP: AP CPU #6 Launched!
> Trying to mount root from ufs:/dev/da0p3
> ZFS filesystem version 5
> ZFS storage pool version 28
> ugen2.2: <USB> at usbus2 (disconnected)
> ukbd0: at uhub2, port 1, addr 2 (disconnected)
> uhid0: at uhub2, port 1, addr 2 (disconnected)
> ugen2.2: <USB> at usbus2
> ukbd0: <USB USB Keykoard, class 0/0, rev 1.10/1.10, addr 2> on usbus2
> kbd2 at ukbd0
> uhid0: <USB USB Keykoard, class 0/0, rev 1.10/1.10, addr 2> on usbus2
> (da7:mps1:0:2:0): READ(10). CDB: 28 0 3 33 c6 f5 0 0 1 0
> (da7:mps1:0:2:0): CAM status: SCSI Status Error
> (da7:mps1:0:2:0): SCSI status: Check Condition
> (da7:mps1:0:2:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
> bus device reset occurred)
> (da5:mps1:0:0:0): READ(10). CDB: 28 0 3 33 c6 f5 0 0 1 0
> (da5:mps1:0:0:0): CAM status: SCSI Status Error
> (da5:mps1:0:0:0): SCSI status: Check Condition
> (da5:mps1:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
> bus device reset occurred)
> (da9:mps1:0:6:0): READ(10). CDB: 28 0 3 33 c6 f5 0 0 1 0
> (da9:mps1:0:6:0): CAM status: SCSI Status Error
> (da9:mps1:0:6:0): SCSI status: Check Condition
> (da9:mps1:0:6:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
> bus device reset occurred)
> (da8:mps1:0:3:0): READ(10). CDB: 28 0 4 97 a a3 0 0 1 0
> (da8:mps1:0:3:0): CAM status: SCSI Status Error
> (da8:mps1:0:3:0): SCSI status: Check Condition
> (da8:mps1:0:3:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
> bus device reset occurred)
> pid 2395 (akonadiserver), uid 128: exited on signal 11 (core dumped)
> pid 2492 (akonadiserver), uid 128: exited on signal 11 (core dumped)
> pid 2494 (akonadiserver), uid 128: exited on signal 11 (core dumped)
>
>
>
>
> _______________________________________________
> freebsd-fs at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-fs
> To unsubscribe, send any mail to "freebsd-fs-unsubscribe at freebsd.org"
--
More information about the freebsd-fs
mailing list