how to import raidz2, if only one disk is missing?

[Vladislav V. Prodan]

25.05.2011 5:58, Jason Hellenthal wrote:
>
> Vladislav,
>
> Hi. Just a heads up on this instead of waiting for the MFC to happen you
> may want to boot mfsBSD from Martin Matuska [1][2] to check your disks
> ahead of time and diagnose whether it is worthwhile waiting for the MFC.

Thank you for reminding me about this rescue-CD.

I received a broken pool raidz2.

1) Run smartctl on all 6 disks. He showed that the three discs problem 
with counters:
184 End-to-End_Error 0x0033 001 001 099 Pre-fail Always FAILING_NOW 149

2) I pulled out the two problematic screws to carry the service, but the 
pool would not be installed and not the mounted and remained in the 
status of "FAULTED"

3) I gave up one drive to the service, and the second returned to the 
place, but the pool is still unable to import.


Probably I should do I get all the disks in the pool, correct errors and 
one by one off from the pool and one to refer to the service.

P.S. I have a system to another pool.

-- 
Vladislav V. Prodan
VVP24-UANIC
+380[67]4584408
+380[99]4060508
vlad11 at jabber.ru