Problem with a LSILogic SAS/SATA adapter on 8.2-STABLE/ZFSv28

Stephane LAPIE stephane.lapie at darkbsd.org
Sat Jun 18 14:26:22 UTC 2011


Hello list,

I have a problem with my 8.2-STABLE/ZFSv28 server. I am currently
upgrading my disks from 1.5TB Seagate drives to 2TB Seagate drives, and
therefore replacing devices within ZFS. (I have activated deduplication
on a few file systems, for the record)

I think this is more related to a hardware problem (flaky memory ? flaky
controller/driver maybe ?), but I would appreciate any input.

I experienced several kernel panics, all of which seem to point at mpt0
mis-handling interrupts :
www.darkbsd.org/~darksoul/kernel-panic-mpt1.txt (no target cmd ptrs)
www.darkbsd.org/~darksoul/kernel-panic-mpt2.txt (mpt_intr index == ...)
www.darkbsd.org/~darksoul/kernel-panic-mpt3.txt (NMI in kernel mode)
www.darkbsd.org/~darksoul/kernel-panic-mpt4.txt (LAN CONTEXT REPLY)
www.darkbsd.org/~darksoul/kernel-panic-mpt5.txt (LAN CONTEXT REPLY)
www.darkbsd.org/~darksoul/kernel-panic-mpt6.txt (LAN CONTEXT REPLY)
www.darkbsd.org/~darksoul/kernel-panic-mpt7.txt (LAN CONTEXT REPLY)

I would appeciate any pointers to what on earth "LAN CONTEXT REPLY"
means for an LSI controller (using driver mpt(4)), as I have no idea,
and the source was not really helpful.

The error message about an NMI and RAM parity error is what is scaring
me the most here, and points me in the direction of flaky memory.

This is a personal machine, so I can add debug options and try stuff if
it can help figure out what is going on. Also, any critical data is
replicated, backed up and accounted for.

Thanks in advance for your time.

Here is a zpool list and a zpool status :
NAME    SIZE  ALLOC   FREE    CAP  DEDUP  HEALTH  ALTROOT
prana  22.7T  17.4T  5.29T    76%  1.18x  DEGRADED  -

  pool: prana
 state: DEGRADED
status: One or more devices is currently being resilvered.  The pool will
	continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
 scan: resilver in progress since Sat Jun 18 12:43:02 2011
    13.8T scanned out of 17.3T at 236/s, (scan is slow, no estimated time)
    899G resilvered, 79.38% done
config:

	NAME                                STATE     READ WRITE CKSUM
	prana                               DEGRADED     0     0     0
	  raidz1-0                          DEGRADED     0     0     0
	    da3                             OFFLINE      0     0     0
	    ad14                            ONLINE       0     0     0
	    ad12                            ONLINE       0     0     0
	    da1                             ONLINE       0     0     0
	    da0                             ONLINE       0     0     0
	  raidz1-1                          DEGRADED     0     0     0
	    ad26                            ONLINE       0     0     0
	    replacing-1                     DEGRADED     0     0     0
	      da6/old                       OFFLINE      0     0     0
	      da6                           ONLINE       0     0     0
(resilvering)
	    da4                             ONLINE       0     0     0
	    da7                             ONLINE       0     0     0
	    da5                             ONLINE       0     0     0
	  raidz1-2                          ONLINE       0     0     0
	    ad28                            ONLINE       0     0     0
	    ad8                             ONLINE       0     0     0
	    ad6                             ONLINE       0     0     0
	    ad16                            ONLINE       0     0     0
	    ad18                            ONLINE       0     0     0
	cache
	  gptid/d9c047d5-c1a7-11df-b584-000e0c707d1e  ONLINE       0     0     0
	  gptid/da695e56-c1a7-11df-b584-000e0c707d1e  ONLINE       0     0     0
	spares
	  da8                               AVAIL
	  da9                               AVAIL


Here is my dmesg trace :
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-STABLE #1: Thu Jun 16 23:22:47 JST 2011

darksoul at eirei-no-za.yomi.darkbsd.org:/usr/storage/tech/eirei-no-za.yomi.darkbsd.org/usr/obj/usr/storage/tech/eirei-no-za.yomi.darkbsd.org/usr/src/sys/DARK-2011KERN
amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU    Q9400  @ 2.66GHz (2666.68-MHz
K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x1067a  Family = 6  Model = 17
Stepping = 10

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>

Features2=0x408e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 8589934592 (8192 MB)
avail memory = 8254509056 (7872 MB)
ACPI APIC Table: <PTLTD  	 APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
ichwd module loaded
iscsi: version 2.2.4.2
cryptosoft0: <software crypto> on motherboard
acpi0: <PTLTD 	 XSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
pci3: <ACPI PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port
0x2000-0x203f mem 0xdf980000-0xdf99ffff,0xdf900000-0xdf93ffff irq 16 at
device 4.0 on pci4
em0: [FILTER]
em0: Ethernet address: 00:0e:0c:70:7d:1e
em1: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port
0x2040-0x207f mem 0xdf9a0000-0xdf9bffff,0xdf940000-0xdf97ffff irq 17 at
device 4.1 on pci4
em1: [FILTER]
em1: Ethernet address: 00:0e:0c:70:7d:1f
pcib3: <PCI-PCI bridge> at device 0.2 on pci3
pci5: <PCI bus> on pcib3
em2: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x1820-0x183f mem
0xdfb00000-0xdfb1ffff,0xdfb20000-0xdfb20fff irq 16 at device 25.0 on pci0
em2: Using an MSI interrupt
em2: [FILTER]
em2: Ethernet address: 00:30:48:de:84:88
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 16 at
device 26.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 17 at
device 26.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 18 at
device 26.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem
0xdfb22800-0xdfb22bff irq 18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci6: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci6
pci7: <ACPI PCI bus> on pcib5
mpt0: <LSILogic SAS/SATA Adapter> port 0x3000-0x30ff mem
0xdf310000-0xdf313fff,0xdf300000-0xdf30ffff irq 24 at device 1.0 on pci7
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.12.0
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 0 Active Volumes (2 Max)
mpt0: 0 Hidden Drive Members (10 Max)
atapci0: <Marvell 88SX6081 SATA300 controller> port 0x3400-0x34ff mem
0xdf200000-0xdf2fffff irq 28 at device 7.0 on pci7
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
ata8: <ATA channel 6> on atapci0
ata8: [ITHREAD]
ata9: <ATA channel 7> on atapci0
ata9: [ITHREAD]
uhci3: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 23 at
device 29.0 on pci0
uhci3: [ITHREAD]
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 22 at
device 29.1 on pci0
uhci4: [ITHREAD]
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x18e0-0x18ff irq 18 at
device 29.2 on pci0
uhci5: [ITHREAD]
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem
0xdfb22c00-0xdfb22fff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci17: <ACPI PCI bus> on pcib6
em3: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port
0x4080-0x40bf mem 0xdfa00000-0xdfa1ffff irq 20 at device 0.0 on pci17
em3: [FILTER]
em3: Ethernet address: 00:07:e9:0f:a3:80
em4: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port
0x40c0-0x40ff mem 0xdfa20000-0xdfa3ffff irq 21 at device 0.1 on pci17
em4: [FILTER]
em4: Ethernet address: 00:07:e9:0f:a3:81
vgapci0: <VGA-compatible display> port 0x4000-0x407f mem
0xde800000-0xdeffffff,0xdfa40000-0xdfa4ffff at device 1.0 on pci17
fwohci0: <Texas Instruments TSB43AB22/A> mem
0xdfa54000-0xdfa547ff,0xdfa50000-0xdfa53fff irq 22 at device 3.0 on pci17
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:30:48:00:00:20:42:f6
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:30:48:20:42:f6
fwe0: Ethernet address: 02:30:48:20:42:f6
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:30:48:00:00:20:42:f6 @ 0xfffe00000000, S400,
maxrec 2048
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x80ab60
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1,
CYCLEMASTER mode
atapci1: <ITE IT8213F UDMA133 controller> port
0x4420-0x4427,0x4414-0x4417,0x4418-0x441f,0x4410-0x4413,0x4400-0x440f
irq 23 at device 4.0 on pci17
atapci1: [ITHREAD]
ata10: <ATA channel 0> on atapci1
ata10: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci2: <Intel ICH9 SATA300 controller> port
0x1c70-0x1c77,0x1c64-0x1c67,0x1c68-0x1c6f,0x1c60-0x1c63,0x1c00-0x1c1f
mem 0xdfb22000-0xdfb227ff irq 17 at device 31.2 on pci0
atapci2: [ITHREAD]
atapci2: AHCI called from vendor specific driver
atapci2: AHCI v1.20 controller with 6 3Gbps ports, PM supported
ata11: <ATA channel 0> on atapci2
ata11: [ITHREAD]
ata12: <ATA channel 1> on atapci2
ata12: [ITHREAD]
ata13: <ATA channel 2> on atapci2
ata13: [ITHREAD]
ata14: <ATA channel 3> on atapci2
ata14: [ITHREAD]
ata15: <ATA channel 4> on atapci2
ata15: [ITHREAD]
ata16: <ATA channel 5> on atapci2
ata16: [ITHREAD]
ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x1100-0x111f mem
0xdfb23000-0xdfb230ff irq 17 at device 31.3 on pci0
ichsmb0: [ITHREAD]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
pci0: <dasp> at device 31.6 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
ichwd0: <Intel ICH9R watchdog timer> on isa0
ichwd0: Intel ICH9R watchdog timer (ICH9 or equivalent)
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ad6: 1907729MB <Seagate ST32000641AS CC13> at ata3-master UDMA100 SATA 3Gb/s
ad8: 1907729MB <Seagate ST32000542AS CC37> at ata4-master UDMA100 SATA 3Gb/s
ad12: 1430799MB <Seagate ST31500341AS CC1H> at ata6-master UDMA100 SATA
3Gb/s
ad14: 1907729MB <Seagate ST32000542AS CC34> at ata7-master UDMA100 SATA
3Gb/s
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
ad16: 1907729MB <Seagate ST32000542AS CC34> at ata8-master UDMA100 SATA
3Gb/s
ad18: 1907729MB <Seagate ST32000641AS CC13> at ata9-master UDMA100 SATA
3Gb/s
ata10: DMA limited to UDMA33, controller found non-ATA66 cable
ad20: 3823MB <TRANSCEND 20070831> at ata10-master UDMA33
ad21: 61136MB <TS64GSSD25 M V090331> at ata10-slave UDMA133
ad26: 1907729MB <Seagate ST32000542AS CC34> at ata13-master UDMA100 SATA
3Gb/s
ad28: 1907729MB <Seagate ST32000542AS CC34> at ata14-master UDMA100 SATA
3Gb/s
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen7.2: <Generic> at usbus7
umass0: <Generic External, class 0/0, rev 2.00/1.04, addr 2> on usbus7
umass0:  SCSI over Bulk-Only; quirks = 0x0000
ugen3.2: <Ralink> at usbus3
da0 at mpt0 bus 0 scbus0 target 0 lun 0
da0: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C)
da1 at mpt0 bus 0 scbus0 target 1 lun 0
da1: <ATA ST32000542AS CC37> Fixed Direct Access SCSI-5 device
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da2 at mpt0 bus 0 scbus0 target 2 lun 0
da2: <ATA TS64GSSD25S-M 216> Fixed Direct Access SCSI-5 device
da2: 300.000MB/s transfers
da2: Command Queueing enabled
da2: 61136MB (125206528 512 byte sectors: 255H 63S/T 7793C)
da3 at mpt0 bus 0 scbus0 target 3 lun 0
da3: <ATA ST32000641AS CC13> Fixed Direct Access SCSI-5 device
da3: 300.000MB/s transfers
da3: Command Queueing enabled
da3: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da4 at mpt0 bus 0 scbus0 target 4 lun 0
da4: <ATA ST32000641AS CC13> Fixed Direct Access SCSI-5 device
da4: 300.000MB/s transfers
da4: Command Queueing enabled
da4: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da5 at mpt0 bus 0 scbus0 target 5 lun 0
da5: <ATA ST32000542AS CC37> Fixed Direct Access SCSI-5 device
da5: 300.000MB/s transfers
da5: Command Queueing enabled
da5: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da6 at mpt0 bus 0 scbus0 target 6 lun 0
da6: <ATA ST32000641AS CC13> Fixed Direct Access SCSI-5 device
da6: 300.000MB/s transfers
da6: Command Queueing enabled
da6: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da7 at mpt0 bus 0 scbus0 target 7 lun 0
da7: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-5 device
da7: 300.000MB/s transfers
da7: Command Queueing enabled
da7: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
Root mount waiting for: usbus7
umass0:2:0:-1: Attached to scbus2da8 at umass-sim0 bus 0 scbus2 target 0
lun 0

da8: <Generic External 1.04> Fixed Direct Access SCSI-4 device
da8: 40.000MB/s transfers
da8: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
ugen7.3: <vendor 0x05e3> at usbus7
uhub8: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 3> on
usbus7
Root mount waiting for: usbus7
uhub8: 4 ports with 4 removable, self powered
ugen7.4: <Generic> at usbus7
umass1: <Generic External, class 0/0, rev 2.00/1.04, addr 4> on usbus7
umass1:  SCSI over Bulk-Only; quirks = 0x0000
Root mount waiting for: usbus7
umass1:3:1:-1: Attached to scbus3da9 at umass-sim1 bus 1 scbus3 target 0
lun 0

da9: <Generic External 1.04> Fixed Direct Access SCSI-4 device
da9: 40.000MB/s transfers
da9: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
ugen7.5: <vendor 0x05e3> at usbus7
uhub9: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 5> on
usbus7
Root mount waiting for: usbus7
uhub9: 4 ports with 4 removable, self powered
Trying to mount root from zfs:prana




-- 
Stephane LAPIE, EPITA SRS, Promo 2005
"Even when they have digital readouts, I can't understand them."
--MegaTokyo

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 262 bytes
Desc: OpenPGP digital signature
Url : http://lists.freebsd.org/pipermail/freebsd-fs/attachments/20110618/83a5f3df/signature.pgp


More information about the freebsd-fs mailing list