ZFSBoot try and bsdlabel bootstrap code
Paul Saab
ps at mu.org
Sat Dec 6 10:54:02 PST 2008
ya. I spent a while looking at this. when you look at the generated
code it was obvious. including the wrong sys/type.h is bad
On Dec 6, 2008, at 7:38 AM, "Joao Barros" <joao.barros at gmail.com> wrote:
> On Sun, Nov 30, 2008 at 9:05 AM, Doug Rabson <dfr at rabson.org> wrote:
>>
>> On 30 Nov 2008, at 01:08, Joao Barros wrote:
>>
>>> On Tue, Nov 25, 2008 at 1:48 AM, Joao Barros <joao.barros at gmail.com>
>>> wrote:
>>>>
>>>> On Fri, Nov 21, 2008 at 9:31 PM, Olivier SMEDTS
>>>> <olivier at gid0.org> wrote:
>>>>>
>>>>> 2008/11/20 Doug Rabson <dfr at rabson.org>:
>>>>>>
>>>>>> On 19 Nov 2008, at 22:12, Olivier SMEDTS wrote:
>>>>>>
>>>>>>> Hello,
>>>>>>>
>>>>>>> I want to boot off a ZFS pool (version 13) on an USB stick for
>>>>>>> testing
>>>>>>> purposes. But I'm stuck with the bsdlabel bootstrap code size...
>>>>>>> I'm using a 2 hours old CURRENT.
>>>>>>>
>>>>>>> # kldload usb2_storage_mass
>>>>>>> # kldload zfs
>>>>>>> # dd if=/dev/zero of=/dev/da0 bs=512 count=32
>>>>>>> # fdisk -BI da0
>>>>>>> # dd if=/dev/zero of=/dev/da0s1 bs=512 count=32
>>>>>>> # bsdlabel -wB -b /boot/zfsboot da0s1
>>>>>>> bsdlabel: boot code /boot/zfsboot is wrong size
>>>>>>>
>>>>>>> Is what I'm trying to do with bsdlabel wrong ?
>>>>>>> I previously tried with the default bootstrap code but I had an
>>>>>>> (expected) "boot: Not ufs" error at boot.
>>>>>>>
>>>>>>> PS : I'm not subscribed to this list.
>>>>>>
>>>>>> The process for install zfsboot is a bit manual (and
>>>>>> undocumented). Try
>>>>>> something like this:
>>>>>>
>>>>>> # dd if=/boot/zfsboot of=/dev/da0s1 count=1
>>>>>> # dd if=/boot/zfsboot of=/dev/ds0s1 skip=1 seek=1024
>>>>>>
>>>>>> Alternatively, you might try using the brand new support for
>>>>>> GPT that I
>>>>>> committed yesterday:
>>>>>>
>>>>>> # gpt create -f da0
>>>>>> # gpt boot -b /boot/pmbr -g /boot/gptzfsboot da0
>>>>>> # gpt add -t freebsd-zfs da0
>>>>>> # zpool create mypool da0p2
>>>>>
>>>>> It works !
>>>>>
>>>>> Now I'm stuck at loader(8) prompt.
>>>>
>>>> That's a me too.
>>>>
>>>> I tried this under vmware with LOADER_ZFS_SUPPORT=yes on make.conf:
>>>> # gpart create -s gpt ad0
>>>> # gpart add -b 34 -s 128 -t freebsd-boot ad0
>>>> ad0p1 added
>>>> # gpart add -b 162 -s 15078327 -t freebsd-zfs ad0
>>>> ad0p2 added
>>>> # gpart bootcode -b /boot/pmbr -p /boot/gptzfsboot -i 1 ad0
>>>> # zpool create tank ad0p2
>>>> # zpool set bootfs = tank tank
>>>>
>>>> lsdev on loader shows:
>>>> cd devices:
>>>> disk devices:
>>>> disk0: BIOS drive c:
>>>> disk0p1: FreeBSD boot
>>>> disk0p2: FreeBSD ZFS
>>>> pxe devices:
>>>> zfs devices:
>>>>
>>>> Any hints?
>>>>
>>>
>>>
>>> I'm trying to figure out why loader doesn't see my zfs pool and
>>> here's
>>> what I got:
>>>
>>> FreeBSD/i386 boot
>>> Default: tank:/boot/loader
>>> boot: status pool: tank
>>> config:
>>> NAME STATE
>>> tank ONLINE
>>> ad0p2 ONLINE
>>>
>>> I added some printfs on loader\main.c:
>>>
>>> guid = kargs->zfspool;
>>> unit = zfs_guid_to_unit(guid);
>>> if (unit >= 0) {
>>> sprintf(devname, "zfs%d", unit);
>>> setenv("currdev", devname, 1);
>>> }
>>>
>>> and guid returns the correct guid for my pool but unit returns -1
>>> which by looking at zfs_guid_to_unit means something is not right.
>>>
>>> Any pointers Doug?
>>
>> It looks like loader didn't manage to find the pool for some
>> reason. This
>> probing process happens in sys/boot/zfs/zfs.c in the function
>> zfs_dev_init(). Its supposed to taste all the available disks and
>> partitions
>> for the presence of a ZFS pool. The actual tasting process happens in
>> vdev_probe().
>>
>>
>
> Paul Saab just commited this: http://svn.freebsd.org/changeset/base/185711
> It's working now! Thank you very much to both! :-D
>
>
> --
> Joao Barros
More information about the freebsd-fs
mailing list