400/800 card

[Sean Bruno]

Hidetoshi Shimokawa wrote:
> On Wed, Jun 11, 2008 at 10:56 AM, Sean Bruno <sbruno at miralink.com> wrote:
>   
>> I have a 400/800 card installed in my RELENG_7 box that has one 800
>> connector and two 400 connectors on it.  Looking over the system, I wonder
>> if the card is working correctly when I attach a S400 device to it:
>>
>> [sean at home-test ~]$ sudo fwcontrol -t
>> crc_len: 3 generation:1 node_count:1 sid_count:1
>> id link gap_cnt speed delay cIRM power port0 port1 port2 ini more
>> 00    1      63  S800     0    1   -1W     -     -     -   1    0
>>     
>
> The phy layer doesn't seem to recognize the S400 device.
> It seem to be a hardware problem.
> Are your cable and connector o.k.?
> Did a bus reset occur when you attached the device?
>   
The output of fwcontrol was generated with no attached device.  I 
thought I would see
a report of both the S400 and S800 capable ports in the output.

Sean