Cardbus firewire card no longer works

[Eric Anderson]

I have a western digital cardbus firewire card, that worked in older 
versions of FreeBSD (I believe 4.8, and probably 5.1-RELEASE), however, 
it does NOT work in -current (as of about a week ago).

Does anyone have a list of supported PCCARDs (cardbus most likely)?

Basically, it appears that the machine thinks its a network card..
Here's the log info when I stick in the cardbus card:

Dec 22 07:26:58 neutrino kernel: cardbus0: Resource not specified in 
CIS: id=10, size=10000
Dec 22 07:26:58 neutrino kernel: start (88000000) < sc->membase (f6000000)
Dec 22 07:26:58 neutrino kernel: end (ffffffff) > sc->memlimit (fbffffff)
Dec 22 07:26:58 neutrino kernel: pcib2: device cardbus0 requested 
decoded memory range 0x88000000-0xffffffff
Dec 22 07:26:58 neutrino kernel: found->        vendor=0x14e4, 
dev=0x16a6, revid=0x02
Dec 22 07:26:58 neutrino kernel: bus=2, slot=0, func=0
Dec 22 07:26:58 neutrino kernel: class=02-00-00, hdrtype=0x00, mfdev=0
Dec 22 07:26:58 neutrino kernel: cmdreg=0x0106, statreg=0x02b0, 
cachelnsz=8 (dwords)
Dec 22 07:26:58 neutrino kernel: lattimer=0xa8 (5040 ns), mingnt=0x40 
(16000 ns), maxlat=0x00 (0 ns)
Dec 22 07:26:58 neutrino kernel: intpin=a, irq=222
Dec 22 07:26:58 neutrino kernel: powerspec 2  supports D0 D3  current D0
Dec 22 07:26:58 neutrino kernel: MSI supports 8 messages, 64 bit
Dec 22 07:26:58 neutrino kernel: bge1: <Broadcom BCM5702 Gigabit 
Ethernet, ASIC rev. 0x1002> mem 0x88010000-0x8801ffff irq 11 at device 
0.0 on card bus0
Dec 22 07:26:58 neutrino kernel: start (88010000) < sc->membase (f6000000)
Dec 22 07:26:58 neutrino kernel: pcib2: device bge1 requested decoded 
memory range 0x88010000-0x8801ffff
Dec 22 07:26:58 neutrino kernel: bge1: RX CPU self-diagnostics failed!
Dec 22 07:26:58 neutrino kernel: bge1: chip initialization failed
Dec 22 07:26:58 neutrino kernel: device_probe_and_attach: bge1 attach 
returned 6
Dec 22 07:26:58 neutrino kernel: cbb0: CardBus card activation failed
Dec 22 07:26:58 neutrino kernel: bge0: PHY read timed out
Dec 22 07:27:33 neutrino last message repeated 21 times
Dec 22 07:28:23 neutrino last message repeated 32 times
Dec 22 07:28:25 neutrino kernel: bge0: watchdog timeout -- resetting
Dec 22 07:28:25 neutrino kernel: bge0: PHY read timed out
Dec 22 07:28:25 neutrino last message repeated 9 times
Dec 22 07:28:25 neutrino kernel: bge0: RX CPU self-diagnostics failed!
Dec 22 07:28:25 neutrino kernel: bge0: flow-through queue init failed
Dec 22 07:28:25 neutrino kernel: bge0: initialization failure
Dec 22 07:28:28 neutrino kernel: bge0: PHY read timed out
Dec 22 07:29:03 neutrino last message repeated 21 times
Dec 22 07:29:18 neutrino last message repeated 11 times

And then my network card (bge0) dies.. Looks like it thinks the firewire 
card is also a bge network card, and they stomp on each other..

Any ideas??

Eric



-- 
------------------------------------------------------------------
Eric Anderson	   Systems Administrator      Centaur Technology
All generalizations are false, including this one.
------------------------------------------------------------------