[CFT] CentOS 6.7 ports

[Miguel C]

On Sat, Aug 22, 2015 at 6:02 PM, Johannes Jost Meixner <johannes at meixner.dk>
wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA256
>
>
>
> On 08/20/2015 20:51, Miguel C wrote:
> > Was testing this with sublime3 (linux-c6 installed fine after the
> > patch), I've changed sublime3 Makefile to get the 64bit version
> > instead of 32; updated the plist and distinfo files... and it
> > install fine, but I get a segfault while running it see this is
> > dmesg:
> >
> > pid 59256 (bash), uid 1001: exited on signal 11 (core dumped) pid
> > 59257 (bash), uid 1001: exited on signal 11 (core dumped)
> >
> > Not sure if this is the best way to get a more verbose output when
> > linux ports are involved.
>
> Something you can do is, truss the sublime3 command, and attach the
> logs here.
>

I was unaware of truss thanks, log here for "bash" seems this seems to be
what segfaulting so before debugging sublime I would like to find out why
bash segfaults as I wont be able to run most things without it anyway :P

truss log here:
http://pastebin.com/raw.php?i=igHkXeQq



>
> Likewise, please have a look at devel/linux_kdump and ktrace. Those
> two should get you logs with even more debugging information.
>
> I found linux_kdump before sending the email, but can I just use it with
FreeBSD ktrace? I tough I would need a "linux_ktrace" but I don't find one.


>
> Best,
> - -J
>
>
> >
> >
> >
> > Melhores Cumprimentos // Best Regards
> > ----------------------------------------------- *Miguel Clara* *IT
> > - Sys Admin & Developer*
> >
> > On Wed, Aug 19, 2015 at 11:38 AM, Johannes Jost Meixner
> > <johannes at meixner.dk <mailto:johannes at meixner.dk>> wrote:
> >
> > Please find the work in progress of the CentOS 6.7 ports (both
> > i686 and x68_64) at https://reviews.freebsd.org/D3428.
> >
> >
> > How to test things.
> >
> > Specifics for 64bit: 0. Run FreeBSD 11.0-CURRENT later than end of
> > May, put the following in make.conf:
> >
> > OVERRIDE_LINUX_BASE_PORT=c6_64 OVERRIDE_LINUX_NONBASE_PORTS=c6_64
> >
> > Specifics for 32bit: 0. Run FreeBSD 8.x, 9.x, 10.x and don't touch
> > make.conf.
> >
> >
> >
> > 1. Load the relevant kernel modules (linux.ko, linprocfs.ko, ...)
> >
> > 2. Patch your portstree -- follow the instructions on
> > https://wiki.freebsd.org/CodeReview
> >
> > 3. make -C ports/emulators/linux-c6 install clean
> >
> > 3. Try with all things Linux in the portstree or outside ---
> > Flash, linux Games, Mathematica, Matlab, Oracle 10g, whatever you
> > have at your disposal.
> >
> >
> > _______________________________________________
> > freebsd-emulation at freebsd.org
> > <mailto:freebsd-emulation at freebsd.org> mailing list
> > https://lists.freebsd.org/mailman/listinfo/freebsd-emulation To
> > unsubscribe, send any mail to
> > "freebsd-emulation-unsubscribe at freebsd.org
> > <mailto:freebsd-emulation-unsubscribe at freebsd.org>"
> >
> >
>
> - --
> I've recently changed my email address to:
>
>     johannes at meixner.dk
>
> Please update your addressbook accordingly.
>
> Best regards,
>
> Johannes Meixner
> http://www.meixner.dk
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2
>
> iQIcBAEBCAAGBQJV2KsYAAoJEElqnXBiUNQCyMwP/0Sleo5eCKqgoDsbtWj7aquw
> ryb8SpWDqfZrenFpddiYCbSZt/8D5urJRJWfVT+IxYidJnZqkqUXCYmJgB5/fbct
> MJ2NlCU4/oBTsUVQAWpSVcXAmfHwclFlCuQlBLhuF72LoK/yxKd9FqCp8ZQ8B5yd
> 0nDZzCN2nyVKCotisn2tfsS4bEdkbZRxv1mtFDhPJXZB0f9T1OejMHzC7awoHo8P
> hoSwaAIRvljdJw+7dquV4tTilOcIIVGO5wyvZLyMzWFfnZLSrSwEUtemVNrEPfih
> 9dsOq8rjpFqMa18OXgkYepvF1D1hKlFM30/rzwGZdLonhBxA3MeduuRHoEKceZV9
> HehAFNAzpzH/q02Ty+mmpUfOzCKbNtAkwQDUF5OhFOxudOeSuXkzNGwk7AXGm2Xo
> PTi1nUmVJMgCc69MZP18PoheF/8YovymAu90uLnscp+Cj5lsdblkK1zMVogO+/kS
> nuSgsLOucWCUXmAnILcMG7iczhmUenUrjlX8uC+upret9rqnRw+q3/UNcHQJFr/h
> fJIa1sEDSrXhJzGjtEKmIA2CMKzqL8re9uAHFF/e7O6I5HyZDI0Y+soeVWW2HMko
> cZwmi0pLHwXrudfjQNdlsniWH/2ViDoiCRicGdod3uutuvDbajakVCRARAydxHa4
> Ts5vtZUd468Pa4CaIeBT
> =K3l7
> -----END PGP SIGNATURE-----
>