Network problems while running VirtualBox
Gustau Pérez
gperez at entel.upc.edu
Mon Jul 18 09:47:56 UTC 2011
Al 13/07/2011 23:57, En/na Peter Ross ha escrit:
> Hi all,
>
> I have a problem with the network while running VirtualBox.
>
> As soon as I _run_ a VirtualBox I am not able to copy large files
> (e.g. virtual disks or ZFS snapshots) using ssh/scp to another machine.
>
> The ssh crashes with "Write failed: Cannot allocate memory"
>
> thrown by a write(2) in /usr/src/crypto/openssh/roaming_common.c (in
> function roaming_write). It returns the ENOMEM (an error it should
> never return, according to the mainpage;-)
>
> It is immediately working when I stop the VirtualBox, even if the
> VirtualBox kernel modules are still loaded.
>
> I also "replaced" the VirtualBox load with lookbusy occuping the 2GB
> of memory the VirtualBox usually uses (to emulate the memory
> footprint) but it still works.
>
> I experienced the problem with VirtualBox 3.2 first but the upgrade to
> VirtualBox 4.0.8 and the base system recently did not help.
Hi,
I have AMD64/STABLE+virtualbox[4.0.10|4.1Beta] on a Dell R710 with
two scenarios:
1.- Sending large files from the host to the guest with scp.
1,. rsync+ssh in the host machine (with virtualbox) sending large
files to a remote machine.
in fact both scenarios are the same, the host machine sending large
chunks of data. Both fail as it fails to everyone in the list.
Ok. So far so good. To track down the problem I tested may changes
of configuration with STABLE (if you want the details please let me know
and I'll send them to the list). None did the trick. I even tried
communications between the host and the guest with vboxnet. scp failed
with the "no memory allocation" problem.
Now I tried AMD64/CURRENT+virtualbox 4.0.10 on a laptop. I tested an
scenario like the one described in number 1. It worked just fine. In
fact I tried something like this in the host machine just to be sure:
# for i in {1..10}
do
cat "large_file.data" | ssh -l root 192.168.56.101
"cat -> /dev/null"
done
Where 192.168.56.101 is the guest machine (I'm using vboxnet). This
large file is 8 Gb file. So it gave me an 80Gb transfer. It worked fine.
This scenario would have failed with STABLE.
So I guess it has something to do with the combo STABLE+Virtualbox.
There must a change in CURRENT that doesn't trigger the problem. I think
it would be appropriate if anyone else could also try with CURRENT.
As an addition I remember all of this worked with 8.1 and an early
version of virtualbox 3.2 series . But I can't say which revision of 8.1
I had when I was using that kind of scenarios.
More information about the freebsd-emulation
mailing list