Problem with FreeBSD port

[Mario Lobo]

Hi;

I've been following the FreeBSD port through svn.bluelife.at.

Up to revision 508, everything was fine. On Rev 519 (or before, i'm not sure), 
the port was split into 3. virtualbox, virtualbox-additions and virtualbox-
kmod.


There is no problem building virtualbox-kmod. and virtualbox. The modules load 
without errors and virtualbox starts fine. But when I try to start a VM I get 
this:

00:00:00.644 ERROR [COM]: aRC=NS_ERROR_FAILURE (0x80004005) aIID={0a51994b-
cbc6-4686-94eb-d4e4023280e2} aComponent={Console} aText={Failed to open the 
host network interface re0} aWarning=false, preserve=false

00:00:00.654 ERROR [COM]: aRC=NS_ERROR_FAILURE (0x80004005) aIID={0a51994b-
cbc6-4686-94eb-d4e4023280e2} aComponent={Console} aText={Failed to initialize 
Host Interface Networking (VERR_HOSTIF_INIT_FAILED).

00:00:00.654 Unknown error creating VM (VERR_HOSTIF_INIT_FAILED)} 
aWarning=false, preserve=false

00:00:00.658 Power up failed (vrc=VERR_HOSTIF_INIT_FAILED, rc=NS_ERROR_FAILURE 
(0X80004005))

kldstat
Id Refs Address            Size     Name
 1   60 0xffffffff80100000 caeef0   kernel
 2    2 0xffffffff80daf000 41110    linux.ko
 3    1 0xffffffff80df1000 5b58     snd_cmi.ko
 4    3 0xffffffff80df7000 755a8    sound.ko
 5    1 0xffffffff80e6d000 27d8     amdtemp.ko
 6    1 0xffffffff80e70000 3e20     amdsmb.ko
 7    2 0xffffffff80e74000 24d8     smbus.ko
 8    2 0xffffffff80e77000 227d8    drm.ko
 9    2 0xffffffff80e9a000 12c88    agp.ko
10    1 0xffffffff80ead000 712e0    radeon.ko
11    1 0xffffffff80f1f000 5278     atapicam.ko
12    1 0xffffffff80f25000 fff0     cpufreq.ko
13    1 0xffffffff81022000 3983     linprocfs.ko
14    3 0xffffffff81026000 22db6    vboxdrv.ko
15    2 0xffffffff81049000 26ce     vboxnetflt.ko
16    2 0xffffffff8104c000 8d2c     netgraph.ko
17    1 0xffffffff81055000 13a6     ng_ether.ko
18    1 0xffffffff81057000 d2c      vboxnetadp.ko
19    1 0xffffffff81058000 a8ca     fuse.ko
20    1 0xffffffff81063000 b5b2     ext2fs.ko

It is as if virtualbox can't "see" that the modules ARE loaded, and connect to 
them.

If I revert to the previous version (with the modules compiled together with 
virtualbox), everything works again.

OS:
 FreeBSD 8.0-RC1 #0: Sat Oct 10 16:16:42 BRT 2009 amd64

Thanks,


-- 
Mario Lobo
http://www.mallavoodoo.com.br
FreeBSD since version 2.2.8 [not Pro-Audio.... YET!!] (99,7% winedows FREE)