Making Picostation m2HP work

[hiren panchasara]

On Wed, Aug 28, 2013 at 2:52 PM, hiren panchasara <
hiren.panchasara at gmail.com> wrote:

>
>
>> Alright. I was not loading if_ath_pci and that was the reason.
>> (Thanks to Sean for yelling at me from across the isle).
>>
>> But now, it fails at:
>>
>> ath0: <Atheros 9280> at device 0.0 on pci0
>> ath0: ath_pci_attach: EEPROM firmware @ 0x8046c000
>> [ath]: default pwr offset: -5 dBm != EEPROM pwr offset: 0 dBm; curves
>> will be adjusted.
>> ath0: ath_getchannels: unable to collect channel list from hal, status 12
>> device_attach: ath0 attach returned 22
>>
>
> Turning on debugging:
>
>  # sysctl hw.ath.hal.debug=25600000000
> hw.ath.hal.debug: 0 -> 2147483647
>
>
> # kldload if_ath_pci
> ath0: <Atheros 9280> mem 0x10000000-0x1000ffff irq 0 at device 0.0 on pci0
>
> ath0: ath_pci_attach: EEPROM firmware @ 0x8046c000
> ar9280Attach: sc 0xc090d000 st 0x803006b4 sh 0xb0000000
> ar5416SetReset Applying descriptor swap
> ar5416SetPowerMode: AWAKE -> AWAKE (set chip )
> ar9280Attach: ID 0x802ff VERSION 0x2 TYPE 0x0 REVISION 0x2
> ath_hal_v14EepromAttach Eeprom Version 14.22
> v14EepromReadCTLInfo Numctls = 11
> ar5416SetPowerMode: AWAKE -> AWAKE (set chip )
> ar9280RfAttach: attach AR9280 radio
> [ath]: default pwr offset: -5 dBm != EEPROM pwr offset: 0 dBm; curves will
> be adjusted.
> enableAniMIBCounters: Enable mib counters: OfdmPhyErrBase 0xbffe0c
> cckPhyErrBase 0xbfff38
> ar9280Attach: return
> getchannels: cc 0 regDmn 0xf0 mode 0xffffff ecm
> isEepromValid: invalid regulatory domain/country code 0x2a
>
Adrian:

Do we need to update hal regdomain entries with country code  0x2a?

cheers,
Hiren

getregstate: invalid EEPROM contents
> ath0: ath_getchannels: unable to collect channel list from hal, status 12
> ar5416Detach:
> ar5416SetPowerMode: AWAKE -> AWAKE (set chip )
> Detaching Ani
> Disable MIB counters
> ar5416SetPowerMode: AWAKE -> AWAKE (set chip )
> ar5416SetReset Applying descriptor swap
> ar5416SetPowerMode: AWAKE -> FULL-SLEEP (set chip )
>
> device_attach: ath0 attach returned 22
>
>
> cheers,
> Hiren
>