Current status of TL-WR1043ND

[Nenhum_de_Nos]

On Wed, June 6, 2012 16:47, Harm Weites wrote:
> Adrian,
>
> thanks for the additional information. Looking through the scripts
> (again) I've now added some other tools to the image.
> Are the ath* tools needed for wifi to 'just work', or are they installed
> for debug purposes? Since leaving them out frees some valuable Kbytes to
> store bsnmpd :)

is possible to use the usb port to have more disk space ?

I'm thinking about buying all those stuff needed for flashing, but will research it first. My
microeletronics skills are terrible.

thanks,

matheus

> Could you explain a bit about the issues that you are still seeing
> (regarding aggregate traffic)?
>
> Furthermore, the OpenWrt wiki mentions roughly 250Mbit throughput for
> routed traffic and you mention 50Mbit on your blog (although you still
> have debug options enabled). Did you/someone else do a test without
> debug options (and where do I disable debug options in your scripts)?
>
> Thanks.
>
> Adrian Chadd schreef op di 05-06-2012 om 18:05 [-0700]:
>> Hi!
>>
>> My build scripts don't use the normal rc.conf. telnetd is enabled
>> though. Take a read of the wiki pages:
>> http://code.google.com/p/freebsd-wifi-build/
>>
>> Yes, the ethernet switch is supported. You should be able to use the
>> switch port VLAN config with what's in -HEAD.
>>
>> You can add whatever you want to my build scripts to populate the mfsroot. :-)
>>
>> I'm still trying to flesh out some ath(4) issues when passing
>> aggregate traffic; I know what's going on but it's just taking (more)
>> time to fix than I had allotted.
>>
>>
>>
>> Adrian
>>
>> On 4 June 2012 14:17, Harm Weites <harm at weites.com> wrote:
>> > Hi list,
>> >
>> > back in november Adrian Chadd posted his patches to make the TL-WR1043ND
>> > run FreeBSD, causing some interesting list-traffic. I'd like to load BSD
>> > on the little box, but I'm left with some questions after reading the
>> > archived messages (and I'm hoping some stuff got fixed/sorted in the
>> > past 6 months):
>> >
>> > - What is the status of the 4 port switch, is it seen (and usable) as a
>> > bridge device?
>> > - Has anyone tried doing some packetfilter stuff with it?
>> > - Could anyone give some pointers on getting OpenSSH, bsnmpd, radvd into
>> > the mfsroot?
>> > - Stefan Bethke stated the image should probably be able to be loaded
>> > using the TL-webinterface, has anyone done that?
>> > - The scripts Adrian supplied configure a static ip on the bridge
>> > interface, adding telnetd_enable=yes to rc.conf should start telnetd
>> > after boot, right? (allowing one to login from a switch-connected
>> > device, thus making it a little less neccesary to connect the serial
>> > console)
>> >
>> > My goal would be to have the 1043ND act as router+ap+switch, configure
>> > some vlans, running pf, add an ipv6 tunnel, have radvd running, snmpd
>> > for reading pf stats and using ssh for administration.
>> >
>> > Best regards,
>> > Harm
>> >
>> > _______________________________________________
>> > freebsd-embedded at freebsd.org mailing list
>> > http://lists.freebsd.org/mailman/listinfo/freebsd-embedded
>> > To unsubscribe, send any mail to "freebsd-embedded-unsubscribe at freebsd.org"
>
>
> _______________________________________________
> freebsd-embedded at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-embedded
> To unsubscribe, send any mail to "freebsd-embedded-unsubscribe at freebsd.org"
>


-- 
We will call you Cygnus,
The God of balance you shall be

A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?

http://en.wikipedia.org/wiki/Posting_style