TL-WR1043: switch

[Adrian Chadd]

On 12 December 2011 15:48, Stefan Bethke <stb at lassitu.de> wrote:
> http://www.lassitu.de/freebsd/etherswitch-rtl8366rb.patch

Hi,

What's the kernel configuration and hints that you're using?

I'm trying to build it as part of the kernel and this happens. I
wonder if it's due to the probe order.

gpio0: <Atheros AR71XX GPIO driver> on apb0
gpio0: [GIANT-LOCKED]
gpio0: function_set: 0x0
gpio0: function_clear: 0x0
gpio0: gpio pinmask=0x1c02ae
gpioc0: <GPIO controller> on gpio0
gpiobus0: <GPIO bus> on gpio0
gpioled0: <GPIO led> at pin(s) 1 on gpiobus0
gpioled1: <GPIO led> at pin(s) 2 on gpiobus0
gpioled2: <GPIO led> at pin(s) 5 on gpiobus0
gpioled3: <GPIO led> at pin(s) 9 on gpiobus0
gpioiic0: <GPIO I2C bit-banging driver> at pin(s) 18-19 on gpiobus0
iicbb0: <I2C bit-banging driver> on gpioiic0
iicbus0: <Philips I2C bus> on iicbb0 master-only
rtl8366rb0: <RTL8366RB Ethernet Switch Controller> at addr 0xa8 on iicbus0
rtl8366rb0: rev. 3
device_attach: rtl8366rb0 attach returned 6
iic0: <I2C generic I/O> on iicbus0
ehci0: <AR71XX Integrated USB 2.0 controller> at mem
0x1b000100-0x1bffffff irq 1 on nexus0
usbus0: set host controller mode
usbus0: EHCI version 1.0
usbus0: set host controller mode
usbus0: <AR71XX Integrated USB 2.0 controller> on ehci0
arge0: <Atheros AR71xx built-in ethernet interface> at mem
0x19000000-0x19000fff irq 2 on nexus0
arge0: Overriding MAC from EEPROM
arge0: Ethernet address: 94:0c:6d:fe:4f:20
arge1: <Atheros AR71xx built-in ethernet interface> at mem
0x1a000000-0x1a000fff irq 3 on nexus0
device_attach: arge1 attach returned 22