zfs: zpool status says I have unactivated features, but upgrade says I don't

[Ryan Moeller]

On 2/26/21 5:14 PM, Rebecca Cran wrote:
> I'm seeing a mismatch on 14-CURRENT between 'zpool status' saying I 
> have features that aren't enabled, and 'zpool upgrade' which says I 
> don't.
>
> [bcran at smic ~]$ zpool status
>   pool: spool
>  state: ONLINE
> status: Some supported and requested features are not enabled on the 
> pool.
>         The pool can still be used, but some features are unavailable.
> action: Enable all features using 'zpool upgrade'. Once this is done,
>         the pool may no longer be accessible by software that does not 
> support
>         the features. See zpool-features(5) for details.
>   scan: scrub repaired 0B in 01:20:51 with 0 errors on Thu Feb 11 
> 16:48:07 2021
> config:
>
>         NAME        STATE     READ WRITE CKSUM
>         spool       ONLINE       0     0     0
>           mirror-0  ONLINE       0     0     0
>             ada0p2  ONLINE       0     0     0
>             ada1p2  ONLINE       0     0     0
>             ada2p2  ONLINE       0     0     0
>             ada3p2  ONLINE       0     0     0
>           mirror-1  ONLINE       0     0     0
>             ada4p2  ONLINE       0     0     0
>             ada5p2  ONLINE       0     0     0
>             ada6p2  ONLINE       0     0     0
>             ada7p2  ONLINE       0     0     0
>
> errors: No known data errors
>
> [bcran at smic ~]$ sudo zpool upgrade spool
> This system supports ZFS pool feature flags.
>
> Pool 'spool' already has all supported and requested features enabled.


Should be fixed now, see https://reviews.freebsd.org/D28935

-Ryan