MRSAS Panic during Install.
Santiago Martinez
sm at codenetworks.net
Thu Jun 11 15:19:35 UTC 2020
Hi Everyone, i haven't forget about this.... yet :)
I perform the following test in preparation to apply the patch:
1. Installed 12.1 stable with one disc in raid0, no issues (did this so
i can apply patch and don't have to build a new bootable image).
2. with 12.1 added second raid, in this case RAID1 and it crashed.
during foot complain about wrong/corrupt partition table
Repeated the same test with current with exactly the same results ( I
also hit another issues on mlx5en that crashed with current, will follow
after we can sort this out)
Today I'm planning to apply the patch and see what happens.
Have some question:
* Do you want me to record the booting/error for each case and make it
available?
* Do you want access to the box?
Best regards.
Santiago
On 2020-06-09 22:43, Santiago Martinez wrote:
> Hi there, apologies for the delayed response.
>
> Regarding the lock reversal, I can try to capture the screen showing
> the message.
>
> The "Wil check go it goes...." it was my brain trying to multitask,
> obviously not in a successful way. What I meant to say was "I will
> check how it goes..... without the RAID".
>
> Sure, I will test with the patch and let you know asap. hopefully by
> tomorrow night(BST).
>
> Cheers
>
> Santi
>
>
> On 2020-06-09 19:20, Kashyap Desai wrote:
>>> -----Original Message-----
>>> From: Santiago Martinez [mailto:sm at codenetworks.net]
>>> Sent: Tuesday, June 9, 2020 11:27 PM
>>> To: Kashyap Desai <kashyap.desai at broadcom.com>; Don Lewis
>>> <truckman at freebsd.org>; Andriy Gapon <avg at freebsd.org>
>>> Cc: FreeBSD Current <current at freebsd.org>; Kashyap D. Desai
>>> <kadesai at freebsd.org>; Kenneth D. Merry <ken at freebsd.org>; Sumit Saxena
>>> <sumit.saxena at broadcom.com>; Chandrakanth Patil
>>> <chandrakanth.patil at broadcom.com>
>>> Subject: Re: MRSAS Panic during Install.
>>>
>>> Hi! so it works but i got a lock order reversal warning, but it
>>> continue.
>> OK. So what is a warning ?
>>
>>> Wil check go it goes....
>> Could not get your point. Can you elaborate ?
>>
>>
>> Also can you try Raid - 1 VD with below patch ?
>>
>> diff --git a/mrsas.c b/mrsas.c
>> index 3d33073..60f4b4d 100755
>> --- a/mrsas.c
>> +++ b/mrsas.c
>> @@ -1744,11 +1744,14 @@ mrsas_complete_cmd(struct mrsas_softc *sc,
>> u_int32_t
>> MSIxIndex)
>> data_length =
>> r1_cmd->io_request->DataLength;
>> sense =
>> r1_cmd->sense;
>> }
>> +
>> + mtx_lock(&sc->sim_lock);
>> r1_cmd->ccb_ptr = NULL;
>> if
>> (r1_cmd->callout_owner) {
>>
>> callout_stop(&r1_cmd->cm_callout);
>> r1_cmd->callout_owner
>> = false;
>> }
>> + mtx_unlock(&sc->sim_lock);
>> mrsas_release_mpt_cmd(r1_cmd);
>>
>> mrsas_map_mpt_cmd_status(cmd_mpt,
>> cmd_mpt->ccb_ptr, status,
>> extStatus,
>> data_length, sense);
>>
>>
>>
>>> Santi
>>>
>>> On 2020-06-09 11:13, Santiago Martinez wrote:
>>>> Trying right now, will let you know.....
>>>>
>>>>
>>>> On 2020-06-09 11:07, Kashyap Desai wrote:
>>>>> Hi Santi - Please try without Raid-1 VD. Most likely you will not
>>>>> observe issue, but you can confirm from your end.
>>>>>
>>>>> Kashyap
>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Santiago Martinez [mailto:sm at codenetworks.net]
>>>>>> Sent: Tuesday, June 9, 2020 2:08 PM
>>>>>> To: Don Lewis <truckman at FreeBSD.org>; Andriy Gapon
>>> <avg at FreeBSD.org>
>>>>>> Cc: FreeBSD Current <current at freebsd.org>; Kashyap D. Desai
>>>>>> <kadesai at FreeBSD.org>; Kenneth D. Merry <ken at FreeBSD.org>
>>>>>> Subject: Re: MRSAS Panic during Install.
>>>>>>
>>>>>> Hi Kashayp, that's correct, the servers has two raids. A raid 1 VD0
>>>>>> with 2xSSD on it and a RAID5 VD0.
>>>>>>
>>>>>> Do you want me to break the raid and see i it does not trigger the
>>>>>> bug?
>>>>>>
>>>>>> cheers
>>>>>>
>>>>>> Santi
>>>>>>
>>>>>>
>>>>>> On 2020-06-09 07:51, Don Lewis wrote:
>>>>>>> On 9 Jun, Andriy Gapon wrote:
>>>>>>>> On 09/06/2020 03:42, Santiago Martinez wrote:
>>>>>>>>> Hi Everyone, today I tested with 12.1 and it works without any
>>>>>>>>> issues (at least for now).
>>>>>>>>>
>>>>>>>>> I will sync against current and see if it fails.
>>>>>>>>>
>>>>>>>>> Santiago
>>>>>>>>>
>>>>>>>>> On 2020-06-08 17:41, Santiago Martinez wrote:
>>>>>>>>>> Hi there, tried again and now i got it with UFS also.. that make
>>>>>>>>>> sense..
>>>>>> right...
>>>>>>>>>> On 2020-06-08 15:20, Santiago Martinez wrote:
>>>>>>>>>>> Hi Everyone,
>>>>>>>>>>>
>>>>>>>>>>> I'm installing FreeBSD current(361567) snapshot on a Lenovo
>>>>>>>>>>> SR655
>>>>>> server.
>>>>>>>>>>> After selecting ZFS, and the installer tries to make the
>>>>>>>>>>> partitions, etc I get the following panic.
>>>>>>>>>>>
>>>>>>>>>>> I tried selecting UFS and its works.
>>>>>>>>>>>
>>>>>>>>>>> I uploaded a screenshot as I only have KVM access to it:
>>>>>>>>>>>
>>>>>>>>>>> https://0bin.net/paste/4yn33GkSKiYto6m4#h78yCE6h80-
>>>>>> 3DsApbXa1XLW9+b
>>>>>>>>>>> hoKhOr3MVS+NRgA5A
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> The server is a ThinkSystem SR655, with the following
>>>>>>>>>>> controller, RAID 930-8i 2GB Flash PCIe 12Gb Adapter
>>>>>>>> Lousy OCR of the picture:
>>>>>>>> ...
>>>>>>>> nic: nutex mrsas_sin_lock not ouned at
>>>>>>>> /usr/src/sys/kern/kern_nutex.c:284
>>>>>>>> ...
>>>>>>>> b_trace_self_urapper () at db_trace_self_urapper+8x2b/frane
>>>>>>>> BxfffffeB33c44a918
>>>>>>>> anic() at vpanic+Bx182/frane BxfffffeA33c44ad68
>>>>>>>> nic() at panic+Bx43/frame BxfffffeB33c44adcd
>>>>>>>> _mtx_assert() at __mtx_assert+ at xb@/frane Bxfffffed33c44a9dd
>>>>>>>> callout_stop_safe() at _callout_stop_safe+Bx82/frane
>>>>>>>> Bxfffffe33c44aac
>>>>>>>> rsas_conplete_cnd() at mrsas_complete_cnd+8x1b8/frane
>>>>>>>> BxfffffeB33c4daaed
>>>>>>>> ithread_loop() at ithread_loop+ at x279/frame BxfffffeB33c44ah78
>>>>>>>>
>>>>>>>> This looks like a fallout from r342064.
>>>>>>>> cm_callout is initialized like this:
>>>>>>>> callout_init_mtx(&cmd->cm_callout, &sc->sim_lock, 0); but in
>>>>>>>> mrsas_complete_cmd() it's stopped without holding the lock.
>>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> freebsd-current at freebsd.org mailing list
>>>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-current
>>>>>>> To unsubscribe, send any mail to "freebsd-current-
>>>>>> unsubscribe at freebsd.org"
>>>> _______________________________________________
>>>> freebsd-current at freebsd.org mailing list
>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-current
>>>> To unsubscribe, send any mail to
>>>> "freebsd-current-unsubscribe at freebsd.org"
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to
> "freebsd-current-unsubscribe at freebsd.org"
More information about the freebsd-current
mailing list