ix SR-IOV working
Jan Bramkamp
crest at rlwinm.de
Fri Aug 10 09:35:33 UTC 2018
On 10.08.18 04:38, Pete Wright wrote:
> hello,
>
> i have a newly provisioned VPS system from Vultr which comes stock with
> a 10Gbe ix interface:
>
> ix0 at pci0:1:0:0: class=0x020000 card=0x082315d9 chip=0x15578086 rev=0x01
> hdr=0x00
> vendor = 'Intel Corporation'
> device = '82599 10 Gigabit Network Connection'
> class = network
> subclass = ethernet
>
>
> it is currently running 11-STABLE but was curious if there are any
> reports of people successfully running SR-IOV under CURRENT with this
> hardware and driver? On both 11.2-RELEASE and 11-STABLE, after running
> iovctl to bring up the interface results in the NIC hanging - for
> example like so:
>
> $ sudo iovctl -C -f /etc/iovctl.conf
> iovctl: Failed to configure SR-IOV: No space left on device
>
> <hang>
I got the same error from a X540-AT2, but it didn't hang afterward. The
NIC physical function worked just fine, but I found no way to create
virtual functions. In the end i grabbed two dual port 1Gb/s cards and
passed those to bhyve.
More information about the freebsd-current
mailing list