urtwn(4) / rtwn(4) drivers are merged - call for review / testing

Adrian Chadd adrian.chadd at gmail.com
Sun Oct 2 17:15:52 UTC 2016


hi,

can you turn on debugging? Do you see RX frames?


-a


On 1 October 2016 at 08:09, Kevin Lo <kevlo at freebsd.org> wrote:
> Strange, rtwn(4) stops working.  I tried to scan for the available network,
> but it just returns empty results.
>
> On Fri, Sep 23, 2016 at 02:44:13PM +0300, Andriy Voskoboinyk wrote:
>>
>> Fri, 23 Sep 2016 10:18:30 +0300 було написано Kevin Lo <kevlo at freebsd.org>:
>>
>> Few more questions:
>> 1) does it work with h/w encryption support? (enabled by default)
>> (if 'yes' - I will remove 'hardware crypto enabled' warning).
>> 2) is there rate control support? (wlandebug -i wlan0 rate ; then transmit
>> something - if it works then AMRR will print it's current status
>> periodically)
>> 3) can you test some disabled capabilities? (ad-hoc/AP modes, 11n)
>> (see r92ce_adj_devcaps() in sys/dev/rtwn/rtl8192c/pci/r92ce_attach.c).
>>
>> > It works for me, thanks :)
>> >
>> >     Kevin
>> >
>> > On Fri, Sep 23, 2016 at 09:08:15AM +0300, Andriy Voskoboinyk wrote:
>> >>
>> >> Fri, 23 Sep 2016 04:58:40 +0300 було написано Kevin Lo
>> >> <kevlo at freebsd.org>:
>> >>
>> >> Thanks for the log file,
>> >>
>> >> Tx 'device timeouts' should be fixed in
>> >> https://github.com/s3erios/rtwn/commit/f78d51b6ed8590e3aeb65fbf616aa767034a89f5
>> >> (currently I'm reviewing PCI-specific code to see if there are any
>> >> additional
>> >> issues - e.g., there are no Rx events in the log file).
>> >>
>> >> > On Thu, Sep 22, 2016 at 01:54:21PM +0300, Andriy Voskoboinyk wrote:
>> >> >>
>> >> >> Thu, 22 Sep 2016 12:24:42 +0300 було написано Kevin Lo
>> >> >> <kevlo at freebsd.org>:
>> >> >>
>> >> >> Hi,
>> >> >>
>> >> >> So, the driver was fully tested. Thanks!
>> >> >> Can you set dev.rtwn.0.debug=0x829f for RTL8188CE to see how big
>> >> >> the problem is?
>> >> >
>> >> > Sure.  Here you go
>> >> https://people.freebsd.org/~kevlo/rtl8188ce-debug.txt
>> >> >
>> >> > Thanks,
>> >> > Kevin
>> >> >
>> >> >> > Hi Andriy,
>> >> >> >
>> >> >> > First of all, THANK YOU!  You're doing amazing work!
>> >> >> > Second, I've done some testing on the following devices,
>> >> downloading
>> >> >> > FreeBSD-12.0-CURRENT-amd64-20160809-r303880-disc1.iso from
>> >> >> > ftp.freebsd.org:
>> >> >> >
>> >> >> > - ASUS USB-N10 NANO (RTL8188CUS):
>> >> >> >   rtwn0: <vendor 0x0b05 product 0x17ba, class 0/0, rev 2.00/2.00,
>> >> addr
>> >> >> > 3> on usbus0
>> >> >> >   rtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
>> >> >> >
>> >> >> > - TP-Link TL-WN725N v2 (RTL8188EU):
>> >> >> >   rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 4> on
>> >> >> > usbus0
>> >> >> >   rtwn0: MAC/BB RTL8188EU, RF 6052 1T1R
>> >> >> >
>> >> >> > - D-Link DWA-131 (RTL8192CU):
>> >> >> >   rtwn0: <vendor 0x2001 product 0x330d, class 0/0, rev 2.00/2.00,
>> >> addr
>> >> >> > 3> on usbus0
>> >> >> >   rtwn0: MAC/BB RTL8192CU, RF 6052 2T2R
>> >> >> >
>> >> >> > - TP-Link Archer T4U (RTL8812AU):
>> >> >> >   rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 7> on
>> >> >> > usbus0
>> >> >> >   rtwn0: MAC/BB RTL8812AU, RF 6052 2T2R
>> >> >> >
>> >> >> > - D-Link DWA-171 rev A1 (RTL8821AU):
>> >> >> >   rtwn0: <802.11n WLAN Adapter> on usbus0
>> >> >> >   rtwn0: MAC/BB RTL8821AU, RF 6052 1T1R
>> >> >> >
>> >> >> > - RTL8188CE mini pcie:
>> >> >> >   rtwn0: <Realtek RTL8188CE> port 0xd000-0xd0ff mem
>> >> >> > 0x90800000-0x90803fff irq 17 at device 0.0 on pci1
>> >> >> >   rtwn0: r92ce_attach: warning: hardware crypto enabled
>> >> >> >   rtwn0: MAC/BB RTL8188CE, RF 6052 1T1R
>> >> >> >
>> >> >> > All seems to be ok, except RTL8188CE PCIe adapter doesn't work:
>> >> >> >
>> >> >> > rtwn0: r92ce_post_init: warning: net80211 ratectl is used
>> >> >> > rtwn0: device timeout
>> >> >> >
>> >> >> >       Kevin
>> >> >> >
>> >> >> > On Mon, Sep 19, 2016 at 04:26:38PM +0300, Andriy Voskoboinyk wrote:
>> >> >> >>
>> >> >> >> Thu, 01 Sep 2016 19:29:03 +0300 було написано Andriy Voskoboinyk
>> >> >> >> <avos at freebsd.org>:
>> >> >> >>
>> >> >> >> Now it resides on https://github.com/s3erios/freebsd-rtwn
>> >> (integrated
>> >> >> >> into src tree, so it can be built with 'make buildkernel' / 'make
>> >> >> >> buildworld').
>> >> >> >>
>> >> >> >> This the last stage; once all reported issues will be resolved,
>> >> I'm
>> >> >> >> going to merge it into HEAD.
>> >> >> >>
>> >> >> >> > Hi everyone,
>> >> >> >> >
>> >> >> >> > rtwn(4), urtwn(4) and urtwm (from previous emails) drivers were
>> >> >> merged
>> >> >> >> > into a
>> >> >> >> > single rtwn driver (plus rtwn_usb / rtwn_pci device glue); the
>> >> >> code is
>> >> >> >> > available on https://github.com/s3erios/rtwn repository. Among
>> >> >> >> bugfixes /
>> >> >> >> > code deduplication, there some new features too:
>> >> >> >> >
>> >> >> >> > 1) multi-vap support (one any wireless interface + one STA
>> >> >> interface +
>> >> >> >> > any number of monitor mode interfaces).
>> >> >> >> > 2) few new sysctls:
>> >> >> >> >   * dev.rtwn.#.crypto - controls how to use hardware crypto
>> >> >> >> acceleration
>> >> >> >> >   * dev.rtwn.#.ratectl_selected
>> >> >> >> >   * dev.rtwn.#.ratectl - selects current 'rate control'
>> >> algorithm
>> >> >> >> > (currently only 'none' and 'net80211' are supported; RTL8192CE
>> >> >> needs
>> >> >> >> > testing
>> >> >> >> > with the last).
>> >> >> >> > 3) (incomplete) power management support for RTL8188EU (requires
>> >> >> >> > firmware).
>> >> >> >> > 4) Short Guard Interval support.
>> >> >> >> >
>> >> >> >> > It's known to work with RTL8188CUS, RTL8188EU and RTL8821AU;
>> >> >> however,
>> >> >> >> > it was never tested with RTL8192CE or RTL8812AU.
>> >> >> >> >
>> >> >> >> > How-to-build:
>> >> >> >> > 1) download / checkout the repository.
>> >> >> >> > 2) apply 'patch-usbdevs.diff' against '/usr/src'
>> >> >> >> > 3) build and install rtwn module:
>> >> >> >> >     cd $repository/sys/modules/rtwn && make && make install
>> >> >> >> > 4) build and install rtwn_usb/rtwn_pci:
>> >> >> >> >     cd ../rtwn_usb && make && make install
>> >> >> >> >     cd ../rtwn_pci && make && make install
>> >> >> >> > 5) unload previous && load current drivers:
>> >> >> >> >     kldunload if_urtwn if_rtwn
>> >> >> >> >     kldload /boot/modules/if_rtwn.ko
>> >> /boot/modules/if_rtwn_usb.ko
>> >> >> >> > /boot/modules/if_rtwn_pci.ko
>> >> >> >> > 6) Use.
>> >> >> >> _______________________________________________
>> >> >> >> freebsd-wireless at freebsd.org mailing list
>> >> >> >> https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
>> >> >> >> To unsubscribe, send any mail to
>> >> >> >> "freebsd-wireless-unsubscribe at freebsd.org"
>> >> >> >>
>> >> >>
>> >> _______________________________________________
>> >> freebsd-current at freebsd.org mailing list
>> >> https://lists.freebsd.org/mailman/listinfo/freebsd-current
>> >> To unsubscribe, send any mail to
>> >> "freebsd-current-unsubscribe at freebsd.org"
>> >>
>> >>
>> > _______________________________________________
>> > freebsd-wireless at freebsd.org mailing list
>> > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
>> > To unsubscribe, send any mail to
>> > "freebsd-wireless-unsubscribe at freebsd.org"
>>
>>
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"


More information about the freebsd-current mailing list