Recognizing SMR HDDs
Gary Jennejohn
gljennjohn at gmail.com
Thu May 26 14:00:44 UTC 2016
On Thu, 26 May 2016 09:41:20 -0400
"Kenneth D. Merry" <ken at FreeBSD.ORG> wrote:
> On Thu, May 26, 2016 at 15:29:21 +0200, Gary Jennejohn wrote:
> > On Thu, 26 May 2016 08:34:45 -0400
> > "Kenneth D. Merry" <ken at FreeBSD.ORG> wrote:
> >
> > > On Thu, May 26, 2016 at 08:42:53 +0200, Gary Jennejohn wrote:
> > > What kind of drive is it?
> > >
> >
> > ST8000AS 0002-1NA17Z 0X03
>
> Can you send the output of 'camcontrol inquiry daX -v' and
> 'camcontrol identify daX -v'?
>
> There is a quirk for that particular drive to identify it as Drive Managed.
> When attached behind a SAS controller it looks like this:
>
> # camcontrol inquiry da12 -v
> pass12: <ATA ST8000AS0002-1NA AR17> Fixed Direct Access SPC-4 SCSI device
> pass12: Serial Number Z8407Y52
> pass12: 600.000MB/s transfers, Command Queueing Enabled
>
Thanks for the info.
Here the requested output:
camcontrol inquiry da0 -v
pass5: <ST8000AS 0002-1NA17Z 0X03> Fixed Direct Access SPC-4 SCSI device
pass5: Serial Number 000000000000
pass5: 400.000MB/s transfers
camcontrol identify da0 -v
camcontrol: sending ATA ATA_IDENTIFY via pass_16 with timeout of 30000 msecs
pass5: Raw identify data:
0: 0c5a 3fff c837 0010 0000 0000 003f 0000
8: 0000 0000 2020 2020 2020 2020 2020 2020
16: 5a38 3430 3339 4738 0000 8000 0000 4152
24: 3133 2020 2020 5354 3830 3030 4153 3030
32: 3032 2d31 4e41 3137 5a20 2020 2020 2020
40: 2020 2020 2020 2020 2020 2020 2020 8010
48: 4000 2f00 4000 0200 0200 0007 3fff 0010
56: 003f fc10 00fb 5c10 ffff 0fff 0000 0007
64: 0003 0078 0078 0078 0078 0000 0000 0000
72: 0000 0000 0000 001f 8d0e 0004 00cc 0040
80: 03f0 001f 346b 7d61 6163 3469 bc41 6163
88: 407f 81e7 81e7 0000 fffe 0000 fe00 0000
96: 0000 0000 0000 0000 2ab0 a381 0003 0000
104: 0000 0000 6003 0000 5000 c500 7b0e 5cbe
112: 0000 0000 0000 0000 0000 0000 0000 40dc
120: 409c 0000 0000 0000 0000 0000 0000 0000
128: 0021 2ab0 a381 2ab0 a381 2020 0002 0140
136: 0108 5000 3c06 3c0a 0000 003c 0000 0008
144: 0000 0000 bdff 0280 0000 0000 0008 0000
152: 0000 0000 0000 8000 0000 0184 8b00 8008
160: 0000 0000 0000 0000 0000 0000 0000 0000
168: 0000 0000 0000 0000 0000 0000 0000 0000
176: 0000 0000 0000 0000 0000 0000 0000 0000
184: 0000 0000 0000 0000 0000 0000 0000 0000
192: 0000 0000 0000 0000 0000 0000 0000 0000
200: 0000 0000 0000 0000 0000 0000 30a5 0000
208: 0000 4000 0000 0000 0000 0000 0000 0000
216: 0000 175c 0000 0000 0000 0000 107f 0000
224: 0000 0000 0000 0000 0000 0000 0000 0000
232: 0000 0000 0000 0000 0000 0000 0000 0000
240: 0000 0000 0000 0000 0000 0000 0000 0000
248: 0000 0000 0000 0000 0000 0000 0000 6aa5
camcontrol: sending ATA READ_NATIVE_MAX_ADDRESS48 via pass_16 with timeout of 1000 msecs
pass5: Raw native max data:
0: 0000 0000 0000 0000 0000 0000
error = 0x00, sector_count = 0x0000, device = 0x00, status = 0x00
pass5: <ST8000AS0002-1NA17Z AR13> ACS-2 ATA SATA 3.x device
pass5: 400.000MB/s transfers
protocol ATA/ATAPI-9 SATA 3.x
device model ST8000AS0002-1NA17Z
firmware revision AR13
serial number Z84039G8
WWN 5000c5007b0e5cbe
cylinders 16383
heads 16
sectors/track 63
sector size logical 512, physical 4096, offset 0
LBA supported 268435455 sectors
LBA48 supported 15628053168 sectors
PIO supported PIO4
DMA supported WDMA2 UDMA6
media RPM 5980
Feature Support Enabled Value Vendor
read ahead yes yes
write cache yes yes
flush cache yes yes
overlap no
Tagged Command Queuing (TCQ) no no
Native Command Queuing (NCQ) yes 32 tags
NCQ Queue Management no
NCQ Streaming no
Receive & Send FPDMA Queued no
SMART yes yes
microcode download yes yes
security yes no
power management yes yes
advanced power management no no
automatic acoustic management no no
media status notification no no
power-up in Standby yes no
write-read-verify no no
unload yes yes
general purpose logging yes yes
free-fall no no
Data Set Management (DSM/TRIM) no
Host Protected Area (HPA) yes no 15628053168/1
HPA - Security no
--
Gary Jennejohn
More information about the freebsd-current
mailing list