FreeBSD_HEAD_amd64_gcc4.9 - Build #673 - Failure
Bryan Drewery
bdrewery at FreeBSD.org
Sat Oct 17 05:33:44 UTC 2015
On 10/16/2015 10:17 PM, Bryan Drewery wrote:
> On 10/16/2015 10:10 PM, jenkins-admin at FreeBSD.org wrote:
>> FreeBSD_HEAD_amd64_gcc4.9 - Build #673 - Failure:
>>
>> Build information: https://jenkins.FreeBSD.org/job/FreeBSD_HEAD_amd64_gcc4.9/673/
>> Full change log: https://jenkins.FreeBSD.org/job/FreeBSD_HEAD_amd64_gcc4.9/673/changes
>> Full build log: https://jenkins.FreeBSD.org/job/FreeBSD_HEAD_amd64_gcc4.9/673/console
>>
>> Change summaries:
>>
>> 289441 by ngie:
>> Integrate tools/test/posixshm and tools/regression/posixshm into the FreeBSD
>> test suite as tests/sys/posixshm
>>
>> Some other highlights:
>> - Convert the testcases over to ATF
>> - Don't use hardcoded paths to /tmp (which violate the ATF/kyua samdbox); use
>> mkstemp to generate temporary paths for non-SHM_ANON shm objects.
>>
>> MFC after: 2 weeks
>> Sponsored by: EMC / Isilon Storage Division
>>
>> 289439 by bdrewery:
>> Export OSRELDATE so sub-makes don't look it up again.
>>
>> We pass BOOTSTRAPPING=${OSRELDATE} to some of the sub-makes. Rather than
>> chase every ${MAKE} invokation, just export it as bmake lets us.
>>
>> Sponsored by: EMC / Isilon Storage Division
>>
>> 289438 by bdrewery:
>> Rework the world subdir build targets to use the standard SUBDIR_PARALLEL mechanism.
>>
>> Back in r30113, the 'par-*' targets were added to parallelize portions of
>> the build in a very similar fashion as the SUBDIR_PARALLEL feature used in
>> r263778. Calling a target without 'par-' (for 'parallel') resulted in the
>> standard bsd.subdir.mk handling without parallelization. Given we have
>> SUBDIR_PARALLEL now there is no reason to duplicate the handling here.
>>
>> In build logs this will result in the ${dir}.${target}__D targets now showing
>> as the normal ${target}_subdir_${dir} targets.
>>
>> I audited all of the uses of Makefile.inc1 and Makefile's targets that use
>> bsd.subdir.mk and found that all but 'all' and 'install' were fine to use
>> as always parallel.
>> - For 'install' (from installworld -j) the ordering of lib/ and libexec/
>> before the rest of the system (described in r289433), and etc/ being last
>> (described in r289435), is all that matters. So now a .WAIT is added in
>> the proper places when invoking any 'install*' target. A parallel
>> installworld does work and took 46% of the time a non-parallel
>> install would take on my system with -j15 to ZFS.
>> - For 'all' I left the default handling for this to not run in parallel. A
>> 'par-all' target is still used by the 'everything' stage of buildworld
>> to continue building in parallel as it already has been. This works
>> because most of the dependencies are handled by the early bootstrap
>> phases as well as 'libraries' and 'includes' phases. This lets
>> all of the SUBDIR build in parallel fine, such as bin/ and lib/. This
>> will not work if the user invokes 'all' though as we have dependencies
>> spread all over the system with no way to depend between them (except
>> for the dirdeps feature in the META_MODE build). Calling 'make all'
>> from the top-level is still useful at least when using SUBDIR_OVERRIDE.
>>
>> MFC after: 2 weeks
>> Sponsored by: EMC / Isilon Storage Division
>>
>>
>>
>> The end of the build log:
>>
>> [...truncated 61882 lines...]
>> ===> lib/libpam/modules/pam_group (buildincludes)
>> ===> lib/libpam/modules/pam_guest (buildincludes)
>> ===> lib/libpam/modules/pam_krb5 (buildincludes)
>> ===> lib/libpam/modules/pam_ksu (buildincludes)
>> ===> lib/libpam/modules/pam_lastlog (buildincludes)
>> ===> lib/libpam/modules/pam_login_access (buildincludes)
>> ===> lib/libpam/modules/pam_nologin (buildincludes)
>> ===> lib/libpam/modules/pam_opie (buildincludes)
>> ===> lib/libpam/modules/pam_opieaccess (buildincludes)
>> ===> lib/libpam/modules/pam_passwdqc (buildincludes)
>> ===> lib/libpam/modules/pam_permit (buildincludes)
>> ===> lib/libpam/modules/pam_radius (buildincludes)
>> ===> lib/libpam/modules/pam_rhosts (buildincludes)
>> ===> lib/libpam/modules/pam_rootok (buildincludes)
>> ===> lib/libpam/modules/pam_securetty (buildincludes)
>> ===> lib/libpam/modules/pam_self (buildincludes)
>> ===> lib/libpam/modules/pam_ssh (buildincludes)
>> ===> lib/libpam/modules/pam_tacplus (buildincludes)
>> ===> lib/libpam/modules/pam_unix (buildincludes)
>> ===> lib/libpam/libpam (buildincludes)
>> --- _sub.buildincludes ---
>> ===> lib/libpam/libpam/tests (buildincludes)
>> ===> lib/libpam/static_modules (buildincludes)
>> ===> lib/libpcap (buildincludes)
>> ===> lib/libpjdlog (buildincludes)
>> ===> lib/libpmc (buildincludes)
>> ===> lib/libproc (buildincludes)
>> --- _sub.buildincludes ---
>> ===> lib/libproc/tests (buildincludes)
>> ===> lib/libprocstat (buildincludes)
>> --- _sub.buildincludes ---
>> ===> lib/libprocstat/zfs (buildincludes)
>> ===> lib/libradius (buildincludes)
>> ===> lib/librpcsvc (buildincludes)
>> ===> lib/librt (buildincludes)
>> --- _sub.buildincludes ---
>> ===> lib/librt/tests (buildincludes)
>> ===> lib/librtld_db (buildincludes)
>> ===> lib/libsbuf (buildincludes)
>> ===> lib/libsdp (buildincludes)
>> ===> lib/libsm (buildincludes)
>> ===> lib/libsmb (buildincludes)
>> ===> lib/libsmdb (buildincludes)
>> ===> lib/libsmutil (buildincludes)
>> ===> lib/libsqlite3 (buildincludes)
>> ===> lib/libstand (buildincludes)
>> ===> lib/libstdbuf (buildincludes)
>> ===> lib/libstdthreads (buildincludes)
>> ===> lib/libtacplus (buildincludes)
>> ===> lib/libtelnet (buildincludes)
>> ===> lib/libthr (buildincludes)
>> --- _sub.buildincludes ---
>> ===> lib/libthr/tests (buildincludes)
>> --- _sub.buildincludes ---
>> ===> lib/libthr/tests/dlopen (buildincludes)
>> --- _sub.buildincludes ---
>> ===> lib/libthr/tests/dlopen/dso (buildincludes)
>> ===> lib/libthread_db (buildincludes)
>> ===> lib/libucl (buildincludes)
>> ===> lib/libufs (buildincludes)
>> ===> lib/libugidfw (buildincludes)
>> ===> lib/libulog (buildincludes)
>> ===> lib/libunbound (buildincludes)
>> ===> lib/libusbhid (buildincludes)
>> ===> lib/libusb (buildincludes)
>> ===> lib/libutil (buildincludes)
>> --- _sub.buildincludes ---
>> ===> lib/libutil/tests (buildincludes)
>> ===> lib/libvgl (buildincludes)
>> ===> lib/libvmmapi (buildincludes)
>> ===> lib/libwrap (buildincludes)
>> ===> lib/libxo (buildincludes)
>> --- _sub.buildincludes ---
>> ===> lib/libxo/tests (buildincludes)
>> --- _sub.buildincludes ---
>> ===> lib/libxo/tests/encoder (buildincludes)
>> ===> lib/liby (buildincludes)
>> ===> lib/libypclnt (buildincludes)
>> ===> lib/libz (buildincludes)
>> ===> lib/ncurses (buildincludes)
>> --- _sub.buildincludes ---
>> ===> lib/ncurses/ncurses (buildincludes)
>> ===> lib/ncurses/form (buildincludes)
>> ===> lib/ncurses/menu (buildincludes)
>> ===> lib/ncurses/panel (buildincludes)
>> ===> lib/ncurses/ncursesw (buildincludes)
>> --- ncurses_dll.h ---
>> sed </builds/FreeBSD_HEAD_amd64_gcc4.9/lib/ncurses/ncursesw/../../../contrib/ncurses/include/ncurses_dll.h.in >ncurses_dll.h -e "s%@NCURSES_WRAP_PREFIX@%_nc_%g"
>> ===> lib/ncurses/formw (buildincludes)
>> ===> lib/ncurses/menuw (buildincludes)
>> ===> lib/ncurses/panelw (buildincludes)
>> ===> lib/atf (buildincludes)
>> --- _sub.buildincludes ---
>> ===> lib/atf/libatf-c (buildincludes)
>> --- _sub.buildincludes ---
>> ===> lib/atf/libatf-c/tests (buildincludes)
>> --- _sub.buildincludes ---
>> ===> lib/atf/libatf-c/tests/detail (buildincludes)
>> ===> lib/atf/libatf-c++ (buildincludes)
>> --- _sub.buildincludes ---
>> ===> lib/atf/libatf-c++/tests (buildincludes)
>> --- _sub.buildincludes ---
>> ===> lib/atf/libatf-c++/tests/detail (buildincludes)
>> ===> lib/atf/tests (buildincludes)
>> --- _sub.buildincludes ---
>> ===> lib/atf/tests/test-programs (buildincludes)
>> ===> lib/clang (buildincludes)
>> --- _sub.buildincludes ---
>> ===> lib/clang/libclanganalysis (buildincludes)
>> ===> lib/clang/libclangarcmigrate (buildincludes)
>> ===> lib/clang/libclangast (buildincludes)
>> ===> lib/clang/libclangbasic (buildincludes)
>> ===> lib/clang/libclangcodegen (buildincludes)
>> ===> lib/clang/libclangdriver (buildincludes)
>> ===> lib/clang/libclangedit (buildincludes)
>> ===> lib/clang/libclangfrontend (buildincludes)
>> ===> lib/clang/libclangfrontendtool (buildincludes)
>> ===> lib/clang/libclanglex (buildincludes)
>> ===> lib/clang/libclangparse (buildincludes)
>> ===> lib/clang/libclangrewritefrontend (buildincludes)
>> ===> lib/clang/libclangrewrite (buildincludes)
>> ===> lib/clang/libclangsema (buildincludes)
>> ===> lib/clang/libclangserialization (buildincludes)
>> ===> lib/clang/libclangstaticanalyzercheckers (buildincludes)
>> ===> lib/clang/libclangstaticanalyzercore (buildincludes)
>> ===> lib/clang/libclangstaticanalyzerfrontend (buildincludes)
>> ===> lib/clang/libllvmanalysis (buildincludes)
>> ===> lib/clang/libllvmasmparser (buildincludes)
>> ===> lib/clang/libllvmasmprinter (buildincludes)
>> ===> lib/clang/libllvmbitreader (buildincludes)
>> ===> lib/clang/libllvmbitwriter (buildincludes)
>> ===> lib/clang/libllvmcodegen (buildincludes)
>> ===> lib/clang/libllvmcore (buildincludes)
>> ===> lib/clang/libllvminstcombine (buildincludes)
>> ===> lib/clang/libllvminstrumentation (buildincludes)
>> ===> lib/clang/libllvmipa (buildincludes)
>> ===> lib/clang/libllvmipo (buildincludes)
>> ===> lib/clang/libllvmirreader (buildincludes)
>> ===> lib/clang/libllvmlibdriver (buildincludes)
>> ===> lib/clang/libllvmlinker (buildincludes)
>> ===> lib/clang/libllvmmc (buildincludes)
>> ===> lib/clang/libllvmmcdisassembler (buildincludes)
>> ===> lib/clang/libllvmmcparser (buildincludes)
>> ===> lib/clang/libllvmmirparser (buildincludes)
>> ===> lib/clang/libllvmobjcarcopts (buildincludes)
>> ===> lib/clang/libllvmobject (buildincludes)
>> ===> lib/clang/libllvmoption (buildincludes)
>> ===> lib/clang/libllvmprofiledata (buildincludes)
>> ===> lib/clang/libllvmscalaropts (buildincludes)
>> ===> lib/clang/libllvmselectiondag (buildincludes)
>> ===> lib/clang/libllvmsupport (buildincludes)
>> ===> lib/clang/libllvmtablegen (buildincludes)
>> ===> lib/clang/libllvmtarget (buildincludes)
>> ===> lib/clang/libllvmtransformutils (buildincludes)
>> ===> lib/clang/libllvmvectorize (buildincludes)
>> ===> lib/clang/libllvmaarch64asmparser (buildincludes)
>> ===> lib/clang/libllvmaarch64codegen (buildincludes)
>> ===> lib/clang/libllvmaarch64desc (buildincludes)
>> ===> lib/clang/libllvmaarch64info (buildincludes)
>> ===> lib/clang/libllvmaarch64instprinter (buildincludes)
>> ===> lib/clang/libllvmaarch64utils (buildincludes)
>> ===> lib/clang/libllvmarmasmparser (buildincludes)
>> ===> lib/clang/libllvmarmcodegen (buildincludes)
>> ===> lib/clang/libllvmarmdesc (buildincludes)
>> ===> lib/clang/libllvmarmdisassembler (buildincludes)
>> ===> lib/clang/libllvmarminfo (buildincludes)
>> ===> lib/clang/libllvmarminstprinter (buildincludes)
>> ===> lib/clang/libllvmmipsasmparser (buildincludes)
>> ===> lib/clang/libllvmmipscodegen (buildincludes)
>> ===> lib/clang/libllvmmipsdesc (buildincludes)
>> ===> lib/clang/libllvmmipsinfo (buildincludes)
>> ===> lib/clang/libllvmmipsinstprinter (buildincludes)
>> ===> lib/clang/libllvmpowerpcasmparser (buildincludes)
>> ===> lib/clang/libllvmpowerpccodegen (buildincludes)
>> ===> lib/clang/libllvmpowerpcdesc (buildincludes)
>> ===> lib/clang/libllvmpowerpcdisassembler (buildincludes)
>> ===> lib/clang/libllvmpowerpcinfo (buildincludes)
>> ===> lib/clang/libllvmpowerpcinstprinter (buildincludes)
>> ===> lib/clang/libllvmsparcasmparser (buildincludes)
>> ===> lib/clang/libllvmsparccodegen (buildincludes)
>> ===> lib/clang/libllvmsparcdesc (buildincludes)
>> ===> lib/clang/libllvmsparcinfo (buildincludes)
>> ===> lib/clang/libllvmsparcinstprinter (buildincludes)
>> ===> lib/clang/libllvmx86asmparser (buildincludes)
>> ===> lib/clang/libllvmx86codegen (buildincludes)
>> ===> lib/clang/libllvmx86desc (buildincludes)
>> ===> lib/clang/libllvmx86info (buildincludes)
>> ===> lib/clang/libllvmx86instprinter (buildincludes)
>> ===> lib/clang/libllvmx86utils (buildincludes)
>> ===> lib/clang/include (buildincludes)
>> --- arm_neon.h ---
>> clang-tblgen -gen-arm-neon -d arm_neon.d -o arm_neon.h /builds/FreeBSD_HEAD_amd64_gcc4.9/lib/clang/include/../../../contrib/llvm/tools/clang/include/clang/Basic/arm_neon.td
>> /builds/FreeBSD_HEAD_amd64_gcc4.9/lib/clang/include/../../../contrib/llvm/tools/clang/include/clang/Basic/arm_neon.td:701:1: error: Record `VMOVL' does not have a field named `Operand'!
>>
>> def VMOVL : SInst<"vmovl", "wd", "csiUcUsUi">;
>> ^
>> *** [arm_neon.h] Error code 1
>>
>> make[7]: stopped in /builds/FreeBSD_HEAD_amd64_gcc4.9/lib/clang/include
>> 1 error
>>
>
> I don't see how these changes cause this and I'm unable to reproduce
> here. Is anyone else hitting this?
>
https://jenkins.freebsd.org/job/FreeBSD_HEAD_sparc64/lastBuild/consoleText
The sparc64 build is past this. I don't think it was due to my changes,
which were largely a NOP.
I'm going to bed now, will look more tomorrow.
>> make[7]: stopped in /builds/FreeBSD_HEAD_amd64_gcc4.9/lib/clang/include
>> *** [_sub.buildincludes] Error code 2
>>
>> make[6]: stopped in /builds/FreeBSD_HEAD_amd64_gcc4.9/lib/clang
>> 1 error
>>
>> make[6]: stopped in /builds/FreeBSD_HEAD_amd64_gcc4.9/lib/clang
>> *** [_sub.buildincludes] Error code 2
>>
>> make[5]: stopped in /builds/FreeBSD_HEAD_amd64_gcc4.9/lib
>> 1 error
>>
>> make[5]: stopped in /builds/FreeBSD_HEAD_amd64_gcc4.9/lib
>> *** [_sub.buildincludes] Error code 2
>>
>> make[4]: stopped in /builds/FreeBSD_HEAD_amd64_gcc4.9
>> 1 error
>>
>> make[4]: stopped in /builds/FreeBSD_HEAD_amd64_gcc4.9
>> *** [buildincludes] Error code 2
>>
>> make[3]: stopped in /builds/FreeBSD_HEAD_amd64_gcc4.9
>> 1 error
>>
>> make[3]: stopped in /builds/FreeBSD_HEAD_amd64_gcc4.9
>> *** [includes] Error code 2
>>
>> make[2]: stopped in /builds/FreeBSD_HEAD_amd64_gcc4.9
>> 1 error
>>
>> make[2]: stopped in /builds/FreeBSD_HEAD_amd64_gcc4.9
>> *** [_includes] Error code 2
>>
>> make[1]: stopped in /builds/FreeBSD_HEAD_amd64_gcc4.9
>> 1 error
>>
>> make[1]: stopped in /builds/FreeBSD_HEAD_amd64_gcc4.9
>> *** [buildworld] Error code 2
>>
>> make: stopped in /builds/FreeBSD_HEAD_amd64_gcc4.9
>> 1 error
>>
>> make: stopped in /builds/FreeBSD_HEAD_amd64_gcc4.9
>> Build step 'Execute shell' marked build as failure
>> [WARNINGS] Skipping publisher since build result is FAILURE
>> IRC notifier plugin: Sending notification to: #freebsd-commits
>> Email was triggered for: Failure - Any
>> Sending email for trigger: Failure - Any
>
>
>
>
--
Regards,
Bryan Drewery
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: OpenPGP digital signature
URL: <http://lists.freebsd.org/pipermail/freebsd-current/attachments/20151016/5dde3a5e/attachment.bin>
More information about the freebsd-current
mailing list