Suspend/resume on i915 stop working between r278348 and r278741.
Ranjan1018 .
214748mv at gmail.com
Mon Feb 16 21:19:36 UTC 2015
2015-02-16 10:50 GMT+01:00 Konstantin Belousov <kostikbel at gmail.com>:
> On Sun, Feb 15, 2015 at 08:43:55PM +0100, Ranjan1018 . wrote:
> > 2015-02-15 19:59 GMT+01:00 Konstantin Belousov <kostikbel at gmail.com>:
> >
> > > On Sun, Feb 15, 2015 at 07:45:44PM +0100, Ranjan1018 . wrote:
> > > >
> > > > Unfortunately does not work for me. Tested with r278803.
> > >
> > > Does your machine resume if you boot with hw.x2apic_enable set to 0
> > > from the loader prompt ?
> >
> > Yes. I have added to it to loader.conf
> > $ cat /boot/loader.conf | grep x2apic_enable
> > hw.x2apic_enable=0
> >
> > Confirm that x2apic is disabled after tunable
> > > frobbing, with sysctl hw.apic.x2apic_mode.
> > >
> > $ sysctl hw.apic.x2apic_mode
> > hw.apic.x2apic_mode: 0
>
> And, does your machine resumed successfully with the tunable set ?
>
Yes.
>
> Below is the patch which seemingly worked for Gleb.
> You should not set the tunable to test it properly.
>
> diff --git a/sys/amd64/amd64/mp_machdep.c b/sys/amd64/amd64/mp_machdep.c
> index 13c3d43..b767691 100644
> --- a/sys/amd64/amd64/mp_machdep.c
> +++ b/sys/amd64/amd64/mp_machdep.c
> @@ -1507,6 +1507,7 @@ cpususpend_handler(void)
> vmm_resume_p();
>
> /* Resume MCA and local APIC */
> + lapic_xapic_mode();
> mca_resume();
> lapic_setup(0);
>
> diff --git a/sys/i386/i386/mp_machdep.c b/sys/i386/i386/mp_machdep.c
> index 32b9540..a80de54 100644
> --- a/sys/i386/i386/mp_machdep.c
> +++ b/sys/i386/i386/mp_machdep.c
> @@ -1555,6 +1555,7 @@ cpususpend_handler(void)
> cpu_ops.cpu_resume();
>
> /* Resume MCA and local APIC */
> + lapic_xapic_mode();
> mca_resume();
> lapic_setup(0);
>
> diff --git a/sys/x86/acpica/acpi_wakeup.c b/sys/x86/acpica/acpi_wakeup.c
> index 74522be..e652419 100644
> --- a/sys/x86/acpica/acpi_wakeup.c
> +++ b/sys/x86/acpica/acpi_wakeup.c
> @@ -270,6 +270,7 @@ acpi_wakeup_machdep(struct acpi_softc *sc, int state,
> int sleep_result,
> initializecpu();
> PCPU_SET(switchtime, 0);
> PCPU_SET(switchticks, ticks);
> + lapic_xapic_mode();
> #ifdef SMP
> if (!CPU_EMPTY(&suspcpus))
> acpi_wakeup_cpus(sc);
> diff --git a/sys/x86/x86/local_apic.c b/sys/x86/x86/local_apic.c
> index 1809fa6..1b66674 100644
> --- a/sys/x86/x86/local_apic.c
> +++ b/sys/x86/x86/local_apic.c
> @@ -527,7 +527,6 @@ native_lapic_xapic_mode(void)
> saveintr = intr_disable();
> if (x2apic_mode)
> native_lapic_enable_x2apic();
> - native_lapic_disable();
> intr_restore(saveintr);
> }
>
>
Thank you Konstantin, it works for me too!
I have commented 'hw.x2apic_enable=0' in /boot/loader.conf
$ cat /boot/loader.conf | grep x2apic_enable
#hw.x2apic_enable=0
the 2xapic result enabled
$ sysctl hw.apic.x2apic_mode
hw.apic.x2apic_mode: 1
and suspend/resume works again.
Regards
Maurizio
More information about the freebsd-current
mailing list