[patch] Switch to text mode during efi boot
黄文辉@Gmail
huanghwh at gmail.com
Mon Jun 2 23:26:11 UTC 2014
Ed,
Is there any progress about framebuffer corruption?
Thanks,
Huang Wenhui
> 在 2014年5月22日,23:54,Ed Maste <emaste at freebsd.org> 写道:
>
>> On 22 May 2014 11:32, Rafael Espíndola <rafael.espindola at gmail.com> wrote:
>> The attached patch causes both boot1 and loader.efi to switch to text
>> mode. This only
>> seems to make a difference on Macs where otherwise no information was being
>> displayed.
>>
>> The ConsoleControl.h file is copied from
>> EdkCompatibilityPkg/Foundation/Protocol/ConsoleControl in
>> https://github.com/tianocore/edk2.
>>
>> I tested that both programs are able to change to text mode by
>> enabling only one of them at a time.
>>
>> With this patch I am able to see loaders output on all the macs I
>> tried. The kernel boots correctly on a MacPro, but unfortunately it
>> doesn't seem to be able to find the efi buffer in a MacBookPro.
>
> Great, thank you Rafael. There's framebuffer corruption issues on
> some other hardware as well, so it may be that the eventual fix for
> those will also solve the MBP issue.
>
>> Some design questions:
>>
>> * Why do we have both boot1 and loader? It is just the issue with
>> building a usb image without root that requires having a boot1 that
>> has a predictable size?
>
> No, boot1.efi only exists so that the loader and related Forth and
> config files can be placed in a UFS root filesystem, as is done with
> the x86 BIOS boot and on other platforms. This way the UEFI boot
> easily integrates with the existing installer and tools.
>
> We could put the loader and files in the FAT EFI system partition
> instead, but it would require more substantial changes in the
> installer and system configuration.
>
>> * Even if we want to keep both boot1 and loader, could boot1 use libefi?
>
> I don't think there's any fundamental reason we couldn't. However,
> we're going to need to take a broader look at reworking some of this
> in the context of secure boot anyway (as we look at a signed shim
> loader).
>
>> * Is it ok to always switch to text mode in libefi or should it
>> provide a switch_to_text_mode function?
>
> I suspect it's fine / correct to always switch; we've just been
> "lucky" that the current approach works with most firmwares.
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
More information about the freebsd-current
mailing list