ata0: FAILURE - zero length DMA transfer attempted
Anton Shterenlikht
mexas at bris.ac.uk
Sun Dec 29 03:53:32 UTC 2013
Hello
I updated to r257910 amd64.
I now get lots of:
ata0: FAILURE - zero length DMA transfer attempted
ata0: setting up DMA failed
Please advise
Below are dmesg.boot and pciconf -lv
Many thanks
Anton
***************************************
Rebooting...
cpu_reset: Stopping other CPUs
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #8 r257910: Fri Dec 27 23:46:32 GMT 2013
root at mech-aslap33.men.bris.ac.uk:/usr/obj/usr/src/sys/MINKY amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
WARNING: WITNESS option enabled, expect reduced performance.
CPU: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz (2493.81-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Family = 0x6 Model = 0x17 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x8e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
AMD Features=0x20000800<SYSCALL,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 4032999424 (3846 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <LENOVO TP-7L >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20130823/tbfadt-601)
ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20130823/tbfadt-630)
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: <Software, Yarrow> initialized
kbd1 at kbdmux0
acpi0: <LENOVO TP-7L> on motherboard
CPU0: local APIC error 0x40
acpi_ec0: <Embedded Controller: GPE 0x12, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x2000-0x207f mem 0xd6000000-0xd6ffffff,0xe0000000-0xefffffff,0xd4000000-0xd5ffffff irq 16 at device 0.0 on pci1
nvidia0: <Quadro FX 570M> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
em0: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x1840-0x185f mem 0xfe200000-0xfe21ffff,0xfe225000-0xfe225fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 00:21:86:58:e3:8b
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x1860-0x187f irq 20 at device 26.0 on pci0
usbus0 on uhci0
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x1880-0x189f irq 21 at device 26.1 on pci0
usbus1 on uhci1
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfe226c00-0xfe226fff irq 22 at device 26.7 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
hdac0: <Intel 82801H HDA Controller> mem 0xfe220000-0xfe223fff irq 17 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
iwn0: <Intel Wireless WiFi Link 4965> mem 0xdf2fe000-0xdf2fffff irq 17 at device 0.0 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 20 at device 28.4 on pci0
pci13: <ACPI PCI bus> on pcib6
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x18a0-0x18bf irq 16 at device 29.0 on pci0
usbus3 on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x18c0-0x18df irq 17 at device 29.1 on pci0
usbus4 on uhci3
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x18e0-0x18ff irq 18 at device 29.2 on pci0
usbus5 on uhci4
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfe227000-0xfe2273ff irq 19 at device 29.7 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci1
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci21: <ACPI PCI bus> on pcib7
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xf8100000-0xf8100fff irq 16 at device 0.0 on pci21
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci21: <serial bus, FireWire> at device 0.1 (no driver attached)
sdhci_pci0: <RICOH R5C822 SD> mem 0xf8101800-0xf81018ff irq 18 at device 0.2 on pci21
sdhci_pci0: 1 slot(s) allocated
pci21: <base peripheral> at device 0.3 (no driver attached)
pci21: <base peripheral> at device 0.4 (no driver attached)
pci21: <base peripheral> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1830-0x183f at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ahci0: <Intel ICH8M AHCI SATA controller> port 0x1c48-0x1c4f,0x1c1c-0x1c1f,0x1c40-0x1c47,0x1c18-0x1c1b,0x1c20-0x1c3f mem 0xfe226000-0xfe2267ff irq 16 at device 31.2 on pci0
ahci0: AHCI v1.10 with 3 1.5Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
orm0: <ISA Option ROMs> at iomem 0xcf800-0xd07ff,0xd0800-0xd17ff,0xe0000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
hdacc0: <Analog Devices AD1984 HDA CODEC> at cad 0 on hdac0
hdaa0: <Analog Devices AD1984 Audio Function Group> at nid 1 on hdacc0
pcm0: <Analog Devices AD1984 (Analog 2.0+HP/2.0)> at nid 18,17 and 28,20,21 on hdaa0
pcm1: <Analog Devices AD1984 (Ext-Rear Digital)> at nid 27 on hdaa0
hdacc1: <Conexant (0x2bfa) HDA CODEC> at cad 1 on hdac0
unknown: <Conexant (0x2bfa) HDA CODEC Modem Function Group> at nid 2 on hdacc1 (no driver attached)
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen1.1: <Intel> at usbus1
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <Intel> at usbus0
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen4.1: <Intel> at usbus4
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <Intel> at usbus2
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen6.1: <Intel> at usbus6
uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
ugen5.1: <Intel> at usbus5
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <HITACHI HTS723232A7A364 EC2ZB70B> ATA-8 SATA 2.x device
ada0: Serial Number E3834563JTR37N
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-U10N 1.05> Removable CD-ROM SCSI-0 device
cd0: Serial Number KZ282QB3625
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
uhub2: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
Root mount waiting for: usbus6 usbus2
uhub4: 4 ports with 4 removable, self powered
uhub5: 6 ports with 6 removable, self powered
Root mount waiting for: usbus6
ugen6.2: <vendor 0x162f> at usbus6
Trying to mount root from ufs:/dev/ada0p2 [rw]...
ugen1.2: <vendor 0x0430> at usbus1
ums0: <vendor 0x0430 product 0x0100, class 0/0, rev 2.00/1.07, addr 2> on usbus1
ums0: 3 buttons and [XY] coordinates ID=0
wlan0: Ethernet address: 00:21:5c:50:68:c3
lock order reversal:
1st 0xfffffe00f26637f0 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:3050
2nd 0xfffff8000655e400 dirhash (dirhash) @ /usr/src/sys/ufs/ufs/ufs_dirhash.c:284
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe011e087410
kdb_backtrace() at kdb_backtrace+0x39/frame 0xfffffe011e0874c0
witness_checkorder() at witness_checkorder+0xd23/frame 0xfffffe011e087550
_sx_xlock() at _sx_xlock+0x75/frame 0xfffffe011e087590
ufsdirhash_add() at ufsdirhash_add+0x3b/frame 0xfffffe011e0875d0
ufs_direnter() at ufs_direnter+0x688/frame 0xfffffe011e087690
ufs_mkdir() at ufs_mkdir+0x863/frame 0xfffffe011e087890
VOP_MKDIR_APV() at VOP_MKDIR_APV+0xf0/frame 0xfffffe011e0878c0
kern_mkdirat() at kern_mkdirat+0x1ff/frame 0xfffffe011e087ae0
amd64_syscall() at
amd64_syscall+0x265/frame 0xfffffe011e087bf0
Xfast_syscall() at
Xfast_syscall+0xfb/frame 0xfffffe011e087bf0
--- syscall (136, FreeBSD ELF64, sys_mkdir), rip = 0x80092f98a, r
sp =
0x7ff
fffff
d798, rbp = 0x7fffffffdc70 ---
hostb0 at pci0:0:0:0: class=0x060000 card=0x20b117aa chip=0x2a008086 rev=0x0c hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile PM965/GM965/GL960 Memory Controller Hub'
class = bridge
subclass = HOST-PCI
pcib1 at pci0:0:1:0: class=0x060400 card=0x20b217aa chip=0x2a018086 rev=0x0c hdr=0x01
vendor = 'Intel Corporation'
device = 'Mobile PM965/GM965/GL960 PCI Express Root Port'
class = bridge
subclass = PCI-PCI
em0 at pci0:0:25:0: class=0x020000 card=0x20b917aa chip=0x10498086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82566MM Gigabit Network Connection'
class = network
subclass = ethernet
uhci0 at pci0:0:26:0: class=0x0c0300 card=0x20aa17aa chip=0x28348086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI Controller'
class = serial bus
subclass = USB
uhci1 at pci0:0:26:1: class=0x0c0300 card=0x20aa17aa chip=0x28358086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI Controller'
class = serial bus
subclass = USB
ehci0 at pci0:0:26:7: class=0x0c0320 card=0x20ab17aa chip=0x283a8086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB2 EHCI Controller'
class = serial bus
subclass = USB
hdac0 at pci0:0:27:0: class=0x040300 card=0x20ac17aa chip=0x284b8086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) HD Audio Controller'
class = multimedia
subclass = HDA
pcib2 at pci0:0:28:0: class=0x060400 card=0x20ad17aa chip=0x283f8086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCI Express Port 1'
class = bridge
subclass = PCI-PCI
pcib3 at pci0:0:28:1: class=0x060400 card=0x20ad17aa chip=0x28418086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCI Express Port 2'
class = bridge
subclass = PCI-PCI
pcib4 at pci0:0:28:2: class=0x060400 card=0x20ad17aa chip=0x28438086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCI Express Port 3'
class = bridge
subclass = PCI-PCI
pcib5 at pci0:0:28:3: class=0x060400 card=0x20ad17aa chip=0x28458086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCI Express Port 4'
class = bridge
subclass = PCI-PCI
pcib6 at pci0:0:28:4: class=0x060400 card=0x20ad17aa chip=0x28478086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCI Express Port 5'
class = bridge
subclass = PCI-PCI
uhci2 at pci0:0:29:0: class=0x0c0300 card=0x20aa17aa chip=0x28308086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI Controller'
class = serial bus
subclass = USB
uhci3 at pci0:0:29:1: class=0x0c0300 card=0x20aa17aa chip=0x28318086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI Controller'
class = serial bus
subclass = USB
More information about the freebsd-current
mailing list