Intel Centrino Wireless-N 1000 can't connect to AP

[Adrian Chadd]

OK, I'll see if my centrino 1xx / 1xxx units match yours and are problematic.

Please file a PR!


-a

On 7 December 2013 05:34, 乔楚 <honestqiao at gmail.com> wrote:
> Today ,I upgrade my freebsd from 10-beta4 to current.
> Now, my freebsd can't connect to wireless AP. Wireless LAN strike.
>
> iwn0 in /var/log/message:
> Dec  7 08:02:00 x201i kernel: iwn0: <Intel Centrino Wireless-N 1000> mem
> 0xf2400000-0xf2401fff irq 16 at device 0.0 on pci2
>
> Dec  7 08:02:00 x201i kernel: iwn0: attempting to allocate 1 MSI vectors (1
> supported)
> Dec  7 08:02:00 x201i kernel: msi: routing MSI IRQ 266 to local APIC 0
> vector 62
> Dec  7 08:02:00 x201i kernel: iwn0: using IRQ 266 for MSI
> Dec  7 08:02:00 x201i kernel: iwn0: MIMO 1T2R, BGS, address
> 8c:a9:82:5a:41:58
> Dec  7 08:02:00 x201i kernel: iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> Dec  7 08:02:00 x201i kernel: iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> Dec  7 08:02:00 x201i kernel: iwn0: 1T2R
> Dec  7 08:02:00 x201i kernel: iwn0: 11ng MCS 20MHz
> Dec  7 08:02:00 x201i kernel: iwn0: MCS 0-7: 6.5Mbps - 65Mbps
> Dec  7 08:02:00 x201i kernel: iwn0: 11ng MCS 20MHz SGI
> Dec  7 08:02:00 x201i kernel: iwn0: MCS 0-7: 7Mbps - 72Mbps
> Dec  7 08:02:00 x201i kernel: iwn0: 11ng MCS 40MHz:
> Dec  7 08:02:00 x201i kernel: iwn0: MCS 0-7: 13.5Mbps - 135Mbps
> Dec  7 08:02:00 x201i kernel: iwn0: 11ng MCS 40MHz SGI:
> Dec  7 08:02:00 x201i kernel: iwn0: MCS 0-7: 15Mbps - 150Mbps
> ......
> Dec  7 08:02:00 x201i kernel: wlan0: Ethernet address: f0:de:f1:52:cf:16
> Dec  7 08:02:00 x201i kernel: iwn0: iwn_intr: fatal firmware error
> Dec  7 08:02:00 x201i kernel: firmware error log:
> Dec  7 08:02:00 x201i kernel: error type      = "SYSASSERT" (0x00000005)
> Dec  7 08:02:00 x201i kernel: program counter = 0x00018DBC
> Dec  7 08:02:00 x201i kernel: source line     = 0x00000032
> Dec  7 08:02:00 x201i kernel: error data      = 0x0000000100000000
> Dec  7 08:02:00 x201i kernel: branch link     = 0x00018D6E00018D6E
> Dec  7 08:02:00 x201i kernel: interrupt link  = 0x0000082600000000
> Dec  7 08:02:00 x201i kernel: time            = 1538064582
> Dec  7 08:02:00 x201i kernel: driver status:
> Dec  7 08:02:00 x201i kernel: tx ring  0: qid=0  cur=0   queued=0--
> Dec  7 08:02:00 x201i kernel: tx ring  1: qid=1  cur=0   queued=0--
> Dec  7 08:02:00 x201i kernel: tx ring  2: qid=2  cur=0   queued=0--
> Dec  7 08:02:00 x201i kernel: tx ring  3: qid=3  cur=2   queued=0--
> Dec  7 08:02:00 x201i kernel: tx ring  4: qid=4  cur=57  queued=0--
> Dec  7 08:02:00 x201i kernel: tx ring  5: qid=5  cur=0   queued=0--
> Dec  7 08:02:00 x201i kernel: tx ring  6: qid=6  cur=0   queued=0--
> Dec  7 08:02:00 x201i kernel: tx ring  7: qid=7  cur=0   queued=0--
> Dec  7 08:02:00 x201i kernel: tx ring  8: qid=8  cur=0   queued=0--
> Dec  7 08:02:00 x201i kernel: tx ring  9: qid=9  cur=0   queued=0--
> Dec  7 08:02:00 x201i kernel: tx ring 10: qid=10 cur=0   queued=0--
> Dec  7 08:02:00 x201i kernel: tx ring 11: qid=11 cur=0   queued=0--
> Dec  7 08:02:00 x201i kernel: tx ring 12: qid=12 cur=0   queued=0--
> Dec  7 08:02:00 x201i kernel: tx ring 13: qid=13 cur=0   queued=0--
> Dec  7 08:02:00 x201i kernel: tx ring 14: qid=14 cur=0   queued=0--
> Dec  7 08:02:00 x201i kernel: tx ring 15: qid=15 cur=0   queued=0--
> Dec  7 08:02:00 x201i kernel: tx ring 16: qid=16 cur=0   queued=0--
> Dec  7 08:02:00 x201i kernel: tx ring 17: qid=17 cur=0   queued=0--
> Dec  7 08:02:00 x201i kernel: tx ring 18: qid=18 cur=0   queued=0--
> Dec  7 08:02:00 x201i kernel: tx ring 19: qid=19 cur=0   queued=0--
> Dec  7 08:02:00 x201i kernel: rx ring: cur=29
> ......
> Dec  7 08:02:01 x201i wpa_supplicant[667]: ioctl[SIOCS80211, op=103, val=0,
> arg_len=128]: Device not configured
> Dec  7 08:02:01 x201i wpa_supplicant[667]: wlan0: Failed to initiate AP scan
>
> I do not know where the problem is?
> If necessary, I can tie debugging.
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"