svn commit: r259016 - in head/sys: conf dev/drm2 dev/drm2/i915 dev/drm2/radeon dev/fb dev/vt kern modules/drm2/i915kms modules/drm2/radeonkms sparc64/sparc64 sys teken

[Aleksandr Rybalko]

On Mon, 9 Dec 2013 10:59:14 +0200
Markiyan Kushnir <markiyan.kushnir at gmail.com> wrote:

> Hello,
> 
> I'm on rev. 259102 and hitting drm not being able to attach to fbd
> device at X startup (X freezing).
> 
> Attaching /var/log/messages, pciconf output and kern.conftxt. Please
> let me know if there is something I'm missing here. Posting in this
> thread since I thought it might be relevant to this commit?
> 
> Thanks,
> Markiyan
> 
> 
> 2013/12/8 Marc UBM <ubm.freebsd at googlemail.com>:
> > Hiho! :-)
> >
> > Thanks a lot for working on this!
> >
> > As soon as X is started, things work fine. Before that (as soon as vt
> > is initialized after the boot menu), output on all ttys is flickering,
> > resolution is at 640x480 (guessing here) and changing anything via
> > vidcontrol fails with "inappropriate ioctl for device". Also, screen
> > output starts overlapping, but a "clear" command fixes that
> > temporarily. The "Alt-Gr" key does nothing, manually entering ascii
> > keycodes via alt+number (e.g. alt-124 for |) works.
> >
> > Relevant pciconf output:
> >
> > vgapci0 at pci0:0:2:0:     class=0x030000 card=0x40011297 chip=0x2e328086
> > rev=0x03 hdr=0x00 vendor     = 'Intel Corporation'
> >     device     = '4 Series Chipset Integrated Graphics Controller'
> >     class      = display
> >     subclass   = VGA
> >
> > vgapci1 at pci0:0:2:1:     class=0x038000 card=0x40011297 chip=0x2e338086
> > rev=0x03 hdr=0x00 vendor     = 'Intel Corporation'
> >     device     = '4 Series Chipset Integrated Graphics Controller'
> >     class      = display
> >
> > Best regards,
> > Marc
> >
> >
[[CUT]]
> >
> >
> > --
> > Marc "UBM" Bocklet <eternal.ubm at gmail.com>
> > _______________________________________________
> > freebsd-current at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-current
> > To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"

Hi Markiyan!

According to attached kernel config you run system with syscons (device
sc).

If you want to test it with vt (newcons), follow instructions on the
wiki page.
https://wiki.freebsd.org/Newcons

Thanks.

WBW
-- 
Aleksandr Rybalko <ray at ddteam.net>