Kernel Panic on FreeBSD 10.0-CURRENT #1 r253918

Sam Fourman Jr. sfourman at gmail.com
Sun Aug 4 19:33:51 UTC 2013


hello list,

could someone help me figure out why this machine kernel paniced?
I have a full crashdump file if needed,
this machine is configured as a Firewall and wifi hostap running pf in a
small office


here is a mailing list post to someone that had a similar problem a few
years back
http://lists.freebsd.org/pipermail/freebsd-bugs/2011-April/043985.html

a backtrace, full dmesg, and kernel config are below


kgdb /boot/kernel/kernel /var/crash/vmcore.0
GNU gdb 6.1.1 [FreeBSD]
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain
conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "amd64-marcel-freebsd"...

Unread portion of the kernel message buffer:


Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 10
fault virtual address = 0x10
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff809937a8
stack pointer        = 0x28:0xffffff8000278870
frame pointer        = 0x28:0xffffff80002788c0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (swi4: clock)
trap number = 12
panic: page fault
cpuid = 0
Uptime: 23h57m13s
Dumping 2452 out of 8070
MB:..1%..11%..21%..31%..41%..51%..61%..71%..81%..91%

Reading symbols from /boot/kernel/zfs.ko.symbols...done.
Loaded symbols for /boot/kernel/zfs.ko.symbols
Reading symbols from /boot/kernel/opensolaris.ko.symbols...done.
Loaded symbols for /boot/kernel/opensolaris.ko.symbols
Reading symbols from /boot/kernel/uhid.ko.symbols...done.
Loaded symbols for /boot/kernel/uhid.ko.symbols
Reading symbols from /boot/kernel/wlan_xauth.ko.symbols...done.
Loaded symbols for /boot/kernel/wlan_xauth.ko.symbols
#0  doadump (textdump=1) at pcpu.h:236
236 pcpu.h: No such file or directory.
in pcpu.h
(kgdb) bt
#0  doadump (textdump=1) at pcpu.h:236
#1  0xffffffff8083eb21 in kern_reboot (howto=260) at
/usr/src/sys/kern/kern_shutdown.c:447
#2  0xffffffff8083ee84 in panic (fmt=<value optimized out>) at
/usr/src/sys/kern/kern_shutdown.c:754
#3  0xffffffff80bd5dea in trap_fatal (frame=<value optimized out>,
eva=<value optimized out>) at /usr/src/sys/amd64/amd64/trap.c:873
#4  0xffffffff80bd6027 in trap_pfault (frame=0x0, usermode=<value optimized
out>) at /usr/src/sys/amd64/amd64/trap.c:699
#5  0xffffffff80bd5876 in trap (frame=0xffffff80002787c0) at
/usr/src/sys/amd64/amd64/trap.c:463
#6  0xffffffff80bc06b2 in calltrap () at
/usr/src/sys/amd64/amd64/exception.S:232
#7  0xffffffff809937a8 in in6_tmpaddrtimer (arg=0xfffffe00170fc0b6) at
/usr/src/sys/netinet6/in6_ifattach.c:935
#8  0xffffffff8085140a in softclock_call_cc (c=0xffffffff81325210,
cc=0xffffffff8131c700, direct=0) at /usr/src/sys/kern/kern_timeout.c:674
#9  0xffffffff80851704 in softclock (arg=<value optimized out>) at
/usr/src/sys/kern/kern_timeout.c:802
#10 0xffffffff80815dc3 in intr_event_execute_handlers (p=<value optimized
out>, ie=0xfffffe0014ab3400) at /usr/src/sys/kern/kern_intr.c:1263
#11 0xffffffff80816716 in ithread_loop (arg=0xfffffe0014a896e0) at
/usr/src/sys/kern/kern_intr.c:1276
#12 0xffffffff80813b31 in fork_exit (callout=0xffffffff80816680
<ithread_loop>, arg=0xfffffe0014a896e0, frame=0xffffff8000278a40) at
/usr/src/sys/kern/kern_fork.c:991
#13 0xffffffff80bc0bee in fork_trampoline () at
/usr/src/sys/amd64/amd64/exception.S:606
#14 0x0000000000000000 in ?? ()
Current language:  auto; currently minimal
(kgdb)




if you need a dmesg it is below

Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #1 r253918: Sat Aug  3 18:32:13 UTC 2013
    root at Border:/usr/obj/usr/src/sys/BORDER amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: AMD FX(tm)-4100 Quad-Core Processor             (3600.29-MHz K8-class
CPU)
  Origin = "AuthenticAMD"  Id = 0x600f12  Family = 0x15  Model = 0x1
 Stepping = 2

Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>

Features2=0x1e98220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD
Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,<b23>,<b24>>
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 7868518400 (7504 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID: 16
 cpu1 (AP): APIC ID: 17
 cpu2 (AP): APIC ID: 18
 cpu3 (AP): APIC ID: 19
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero
address or length: 0x0000000000000000/0x1 (20130725/tbfadt-630)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
kbd1 at kbdmux0
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 450
Event timer "HPET2" frequency 14318180 Hz quality 450
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem
0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq 24 at
device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port
0xe000-0xe0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 44 at
device 0.0 on pci2
re0: Using 1 MSI-X message
re0: Chip rev. 0x48000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master,
1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 60:a4:4c:57:02:c4
pcib3: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xfe400000-0xfe407fff irq
46 at device 0.0 on pci3
xhci0: 32 byte context size.
usbus0 on xhci0
pcib4: <ACPI PCI-PCI bridge> irq 53 at device 7.0 on pci0
pci4: <ACPI PCI bus> on pcib4
xhci1: <ASMedia ASM1042 USB 3.0 controller> mem 0xfe300000-0xfe307fff irq
50 at device 0.0 on pci4
xhci1: 32 byte context size.
usbus1 on xhci1
pcib5: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0
pci5: <ACPI PCI bus> on pcib5
ath0: <Atheros AR938x> mem 0xfe200000-0xfe21ffff irq 48 at device 0.0 on
pci5
ar9300_set_stub_functions: setting stub functions
ar9300_set_stub_functions: setting stub functions
ar9300_attach: calling ar9300_hw_attach
ar9300_hw_attach: calling ar9300_eeprom_attach
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: RX status length: 48
ath0: RX buffer size: 4096
ath0: TX descriptor length: 128
ath0: TX status length: 36
ath0: TX buffers per descriptor: 4
ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0
ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 stream STBC transmit enabled
ath0: [HT] 3 RX streams; 3 TX streams
ath0: AR9380 mac 448.3 RF5110 phy 0.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
ahci0: <ATI IXP700 AHCI SATA controller> port
0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem
0xfe50b000-0xfe50b3ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.20 with 3 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe50a000-0xfe50afff irq
18 at device 18.0 on pci0
usbus2 on ohci0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe509000-0xfe5090ff
irq 17 at device 18.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe508000-0xfe508fff irq
20 at device 19.0 on pci0
usbus4 on ohci1
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe507000-0xfe5070ff
irq 21 at device 19.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
pci0: <multimedia, HDA> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci6: <ACPI PCI bus> on pcib6
re1: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port
0xd100-0xd1ff mem 0xfe141000-0xfe1410ff irq 20 at device 5.0 on pci6
re1: Chip rev. 0x10000000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
1000baseT-FDX-flow-master, auto, auto-flow
re1: Ethernet address: 00:14:d1:25:d8:23
re2: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port
0xd000-0xd0ff mem 0xfe140000-0xfe1400ff irq 21 at device 6.0 on pci6
re2: Chip rev. 0x10000000
re2: MAC rev. 0x00000000
miibus2: <MII bus> on re2
rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2
rgephy2:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
1000baseT-FDX-flow-master, auto, auto-flow
re2: Ethernet address: 00:14:d1:25:d8:44
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe506000-0xfe506fff irq
18 at device 20.5 on pci0
usbus6 on ohci2
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe505000-0xfe505fff irq
22 at device 22.0 on pci0
usbus7 on ohci3
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe504000-0xfe5040ff
irq 23 at device 22.2 on pci0
usbus8: EHCI version 1.0
usbus8 on ehci2
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
acpi_throttle0: <ACPI CPU Throttling> on cpu0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
acpi_throttle2: <ACPI CPU Throttling> on cpu2
acpi_throttle2: failed to attach P_CNT
device_attach: acpi_throttle2 attach returned 6
acpi_throttle3: <ACPI CPU Throttling> on cpu3
acpi_throttle3: failed to attach P_CNT
device_attach: acpi_throttle3 attach returned 6
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 12Mbps Full Speed USB v1.0
usbus8: 480Mbps High Speed USB v2.0
ugen0.1: <0x1b21> at usbus0
uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen3.1: <ATI> at usbus3
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen2.1: <ATI> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <0x1b21> at usbus1
uhub3: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen6.1: <ATI> at usbus6
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen4.1: <ATI> at usbus4
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen8.1: <ATI> at usbus8
uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8
ugen7.1: <ATI> at usbus7
uhub8: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <MDT MD400JD-00LSA0 06.01D06> ATA-7 SATA 1.x device
ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada0: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich2 bus 0 scbus1 target 0 lun 0
ada1: <MDT MD400JD-00MSA1 10.01E01> ATA-7 SATA 1.x device
ada1: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
ada2 at ahcich5 bus 0 scbus2 target 0 lun 0
ada2: <MDT MD400JS-00MHB0 02.01C03> ATA-7 SATA 1.x device
ada2: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada2: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad8
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1800146890 Hz quality 1000
uhub4: 2 ports with 2 removable, self powered
uhub8: 4 ports with 4 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub6: 5 ports with 5 removable, self powered
uhub3: 4 ports with 4 removable, self powered
uhub0: 4 ports with 4 removable, self powered
GEOM: ada2: the secondary GPT table is corrupt or invalid.
GEOM: ada2: using the primary only -- recovery suggested.
GEOM: diskid/DISK-MDT-MCANKK515312: the secondary GPT table is corrupt or
invalid.
GEOM: diskid/DISK-MDT-MCANKK515312: using the primary only -- recovery
suggested.
Root mount waiting for: usbus8 usbus5 usbus3
Root mount waiting for: usbus8 usbus5 usbus3
uhub7: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub5: 5 ports with 5 removable, self powered
Trying to mount root from zfs:Puffy []...
ugen4.2: <Razer> at usbus4
ukbd0: <Razer Razer BlackWidow, class 0/0, rev 2.00/2.00, addr 2> on usbus4
kbd2 at ukbd0
<118>Setting hostuuid: becbf4de-e6e7-53eb-eafa-1c0fc0145223.
<118>Setting hostid: 0xfbb7c83e.
<118>Starting ddb.
<118>Entropy harvesting: interrupts ethernet point_to_point
ar9300_Stub_GetCTSTimeout: called
ar9300_Stub_GetCTSTimeout: called
ar9300_Stub_GetAntennaSwitch: called
ar9300_Stub_GetAntennaSwitch: called
<118> kickstart.
<118>Starting file system checks:
<118>Mounting local file systems:.
<118>/etc/rc: WARNING: $swapfile is obsolete.  Ignored.
<118>Writing entropy file:.
<118>Setting hostname: Border.
wlan0: Ethernet address: 7c:c3:a1:b3:fc:af
<118>ifconfig: ioctl(SIOCGIFINFO_IN6): Protocol family not supported
<118>Starting Network: lo0 re0 ath0 re1 re2 pflog0.
<118>lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
<118>   options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
<118>   inet6 ::1 prefixlen 128
<118>   inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
<118>   inet 127.0.0.1 netmask 0xff000000
<118>   nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
<118>re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
<118>
options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
<118>   ether 60:a4:4c:57:02:c4
<118>   inet 75.133.75.194 netmask 0xfffffff8 broadcast 75.133.75.199
<118>   inet6 fe80::62a4:4cff:fe57:2c4%re0 prefixlen 64 scopeid 0x1
<118>   nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>   media: Ethernet autoselect (none)
<118>   status: no carrier
<118>ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
2290
<118>   ether 7c:c3:a1:b3:fc:af
<118>   nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>   media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap>
<118>   status: running
<118>re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
<118>
options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
<118>   ether 00:14:d1:25:d8:23
<118>   inet 192.168.12.1 netmask 0xffffff00 broadcast 192.168.12.255
<118>   inet6 fe80::214:d1ff:fe25:d823%re1 prefixlen 64 scopeid 0x3
<118>   nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>   media: Ethernet autoselect (none)
<118>   status: no carrier
<118>re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>
options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
<118>   ether 00:14:d1:25:d8:44
<118>   nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>   media: Ethernet autoselect (10baseT/UTP <half-duplex>)
<118>   status: active
<118>pflog0: flags=0<> metric 0 mtu 33152
<118>Starting devd.
<118>Starting Network: re2.
<118>re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>
options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
<118>   ether 00:14:d1:25:d8:44
<118>   nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>   media: Ethernet autoselect (10baseT/UTP <half-duplex>)
<118>   status: active
<118>Additional inet routing options: gateway=YES.
<118>ifconfig: ioctl(SIOCGIFINFO_IN6): Protocol family not supported
<118>Starting Network: pflog0.
<118>pflog0: flags=0<> metric 0 mtu 33152
<118>Additional inet routing options: gateway=YES.
uhid0: <Razer Razer BlackWidow, class 0/0, rev 2.00/2.00, addr 2> on usbus4
uhid1: <Razer Razer BlackWidow, class 0/0, rev 2.00/2.00, addr 2> on usbus4
<118>Starting pflog.
<118>Aug  3 19:14:54 pflogd[1589]: [priv]: msg PRIV_OPEN_LOG received
<118>Enabling pf.
<118>add net default: gateway 75.133.75.193 fib 0
<118>add net 192.168.1.0: gateway re0 fib 0
<118>Additional inet routing options: gateway=YES.
<118>add net fe80::: gateway ::1 fib 0,1,2,3,4,5
<118>add net ff02::: gateway ::1 fib 0,1,2,3,4,5
<118>add net ::ffff:0.0.0.0: gateway ::1 fib 0,1,2,3,4,5
<118>add net ::0.0.0.0: gateway ::1 fib 0,1,2,3,4,5
<118>ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
<118>32-bit compatibility ldconfig path: /usr/lib32
<118>Creating and/or trimming log files.
<118>Starting syslogd.
<118>No core dumps found.
<118>Setting date via ntp.
<118> 3 Aug 19:14:57 ntpdate[1778]: step time server 64.246.132.14 offset
-0.389482 sec
<118>Clearing /tmp (X related).
<118>Starting dhcpd.
<118>Aug  3 19:14:58 Border dhcpd: WARNING: Host declarations are global.
 They are not limited to the scope you declared them in.
<118>Starting local daemons:delete net default fib 0
<118>route: writing to routing socket: No such process
<118>delete net default fib 1: not in table
<118>add net default: gateway 75.133.75.193 fib 0
<118>.
<118>Updating motd:.
<118>Mounting late file systems:.
<118>Starting ntpd.
<118>Configuring syscons: blanktime.
<118>Performing sanity check on sshd configuration.
<118>Starting sshd.
<118>Starting cron.
<118>Starting hostapd.
<118>Configuration file: /etc/hostapd.conf
<118>Using interface wlan0 with hwaddr 7c:c3:a1:b3:fc:af and ssid "BlackBox"
<118>
<118>Sat Aug  3 19:14:59 UTC 2013
<118>Aug  3 20:24:48 Border dhcpd: uid lease 192.168.12.202 for client
60:a4:4c:60:d5:a7 is duplicate on WIRED
<118>Aug  3 20:25:24 Border sshd[2029]: error: PAM: authentication error
for illegal user sfourman from 192.168.12.32
<118>Aug  3 20:25:27 Border sshd[2029]: error: PAM: authentication error
for illegal user sfourman from 192.168.12.32
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
<118>Aug  3 20:39:51 Border dhcpd: uid lease 192.168.12.211 for client
60:a4:4c:60:d5:a7 is duplicate on WIRED
<118>Aug  3 20:40:11 Border last message repeated 2 times
<118>Aug  3 20:41:15 Border last message repeated 2 times
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
<118>Aug  3 23:01:11 Border dhcpd: uid lease 192.168.12.202 for client
60:a4:4c:60:d5:a7 is duplicate on WIRED
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
<118>Aug  4 00:52:41 Border dhcpd: uid lease 192.168.12.202 for client
60:a4:4c:60:d5:a7 is duplicate on WIRED
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_tid_drain_print: norm: node 0xffffff800a9e2000:
bf=0xffffff8000cedcc0: addbaw=0, dobaw=0, seqno=164, retry=0
ath0: ath_tx_tid_drain_print: node 0xffffff800a9e2000:
bf=0xffffff8000cedcc0: txq[1] axq_depth=0, axq_aggr_depth=0
ath0: ath_tx_tid_drain_print: node 0xffffff800a9e2000:
bf=0xffffff8000cedcc0: tid txq_depth=2 hwq_depth=0, bar_wait=0, isfiltered=0
ath0: ath_tx_tid_drain_print: node 0xffffff800a9e2000: tid 0: sched=0,
paused=1, incomp=0, baw_head=0, baw_tail=0 txa_start=0, ni_txseqs=166
FRDS 7c:c3:a1:b3:fc:af->78:d6:f0:86:1a:91(7c:c3:a1:b3:fc:af) data QoS [TID
0] 0M
 c802 0000 78d6 f086 1a91 7cc3 a1b3 fcaf 7cc3 a1b3 fcaf 400a 0000 841a
<118>Aug  4 02:00:04 Border login: ROOT LOGIN (root) ON ttyv0
<118>Aug  4 02:02:09 Border dhcpd: uid lease 192.168.12.211 for client
60:a4:4c:60:d5:a7 is duplicate on WIRED
<118>Aug  4 02:02:50 Border last message repeated 4 times
<118>Aug  4 02:04:22 Border last message repeated 3 times
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
<118>Aug  4 02:26:02 Border dhcpd: uid lease 192.168.12.202 for client
60:a4:4c:60:d5:a7 is duplicate on WIRED
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
<118>Aug  4 03:02:06 Border sm-mta[8412]: r74326P0008412: SYSERR(root):
hash map "Alias0": missing map file /etc/mail/aliases.db: No such file or
directory
<118>Aug  4 03:02:06 Border sm-mta[8414]: r74326P0008412: SYSERR(root):
hash map "Alias0": missing map file /etc/mail/aliases.db: No such file or
directory
<118>Aug  4 03:02:07 Border sm-mta[8422]: r74327QB008422: SYSERR(root):
hash map "Alias0": missing map file /etc/mail/aliases.db: No such file or
directory
<118>Aug  4 03:02:07 Border sm-mta[8423]: r74327QB008422: SYSERR(root):
hash map "Alias0": missing map file /etc/mail/aliases.db: No such file or
directory
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_bar_response: huh? bar_tx=0, bar_wait=0
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=176)
ath0: device timeout
ath0: device timeout
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
<118>Aug  4 10:37:43 Border dhcpd: uid lease 192.168.12.202 for client
60:a4:4c:60:d5:a7 is duplicate on WIRED
ath0: ath_tx_should_swq_frame: 78:d6:f0:86:1a:91: Node is asleep; sending
mgmt (type=0, subtype=192)
<118>Aug  4 14:32:42 Border dhcpd: WARNING: Host declarations are global.
 They are not limited to the scope you declared them in.


Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 10
fault virtual address   = 0x10
fault code              = supervisor read data, page not present
instruction pointer     = 0x20:0xffffffff809937a8
stack pointer           = 0x28:0xffffff8000278870
frame pointer           = 0x28:0xffffff80002788c0
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 12 (swi4: clock)
trap number             = 12
panic: page fault
cpuid = 0
Uptime: 23h57m13s
Dumping 2452 out of 8070 MB:^@^@^@^@^@^@^@^@^@^@^@^@^@^
-- 


Kernel config is as follows...

root at Border:/var/crash # cat /usr/src/sys/amd64/conf/BORDER
include GENERIC
nocpu   i486_CPU
ident   BORDER

nooptions       WITNESS
nooptions       INVARIANTS
nodevice        eisa
nodevice        fdc
nooptions SCTP

#Pretty console
options         SC_NORM_ATTR=(FG_GREEN|BG_BLACK)
options         SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN)
options         SC_KERNEL_CONS_ATTR=(FG_LIGHTRED|BG_BLACK)
options         SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED)
options         SC_HISTORY_SIZE=8192

# Firewalling
device          pf
device          pflog
options         ROUTETABLES=6
options         ALTQ
options         ALTQ_HFSC
options         ALTQ_NOPCC
options         IPSTEALTH

# The nullFS to mount local directory
options         NULLFS

# VIMAGE stuff
#makeoptions NO_MODULES=yes
#options VIMAGE
options NETGRAPH
options NETGRAPH_ETHER
options NETGRAPH_BRIDGE
options NETGRAPH_EIFACE
options NETGRAPH_SOCKET
device epair
device if_bridge

# Atheros Wireless NIC card options
options         AH_DEBUG
options         ATH_DEBUG
options         ATH_DIAGAPI
nodevice        bwn
nodevice        bwi

# Delete Sound support
nodevice          sound           # Generic sound driver (required)
nodevice          snd_cmi         # CMedia CMI8338/CMI8738
nodevice          snd_csa         # Crystal Semiconductor CS461x/428x
nodevice          snd_emu10kx     # Creative SoundBlaster Live! and Audigy
nodevice          snd_es137x      # Ensoniq AudioPCI ES137x
nodevice          snd_hda         # Intel High Definition Audio
nodevice          snd_ich         # Intel, NVidia and other ICH AC'97 Audio
nodevice          snd_via8233     # VIA VT8233x Audio
root at Border:/var/crash #


Sam Fourman Jr.


More information about the freebsd-current mailing list