Call for bge(4) testers
Wanpeng Qian
spf72sa9 at rhythm.ocn.ne.jp
Tue Sep 25 02:46:25 UTC 2012
>On Fri, Sep 21, 2012 at 08:34:29PM +0900, Wanpeng Qian wrote:
>> >On Thu, Sep 20, 2012 at 06:56:09AM +0900, Wanpeng Qian wrote:
>> >> Hi,
>> >>
>> >> >On Mon, Sep 17, 2012 at 09:37:21PM +0900, Wanpeng Qian wrote:
>> >> >> Hi, here is the dmesg output.
>> >> >>
>> >> >> bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100>
>> >> >> mem
>> >> >> 0xfe9f0000-0xfe9fffff irq 18 at device 0.0 on pci4
>> >> >> bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
>> >> >> miibus0: <MII bus> on bge0
>> >> >> brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0
>> >> >> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
>> >> >> 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-
>> >> >> flow
>> >> >>
>> >> >
>> >> >It seems your controller is BCM5784 A1. The latest WIP have one
>> >> >change that may affect its DMA behavior. So it would be good to
>> >> >know how the WIP version works on your box.
>> >>
>> >> I update my system to 9-STABLE and using your WIP files.
>> >> after I reboot the whole system. I cannot find bge anymore.
>> >>
>> >> here is the pciconf -lv output.
>> >>
>> >> none1 at pci0:4:0:0: class=0x020000 card=0x705d103c chip=0x165b14e4
>> >> rev=0x10 hdr=0x00
>> >> vendor = 'Broadcom Corporation'
>> >> device = 'NetXtreme BCM5723 Gigabit Ethernet PCIe'
>> >> class = network
>> >> subclass = ethernet
>> >
>> >Hmm, the WIP version didn't remove the chip id so bge(4) may have
>> >failed to attach.
>> >Could you check any message printed by bge(4) in dmesg output?
>>
>> There is neither message related to bge in the dmesg output.
>> nor ifconfig -a output.
>>
>> anything else I can try ?
>
>Does stock bge(4) in latest stable/9 recognize your controller?
>If the answer is yes, would you post full verbose boot message?
I rebuild the kernel without your WIP files. unfortunately it seems
9-STABLE drop the support of this card while 9.0-RELEASE is fine.
still no relate bge message in dmesg.
here is the output of pciconf -lcbv
none1 at pci0:4:0:0: class=0x020000 card=0x705d103c chip=0x165b14e4
rev=0x10 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme BCM5723 Gigabit Ethernet PCIe'
class = network
subclass = ethernet
bar [10] = type Memory, range 64, base 0xfe9f0000, size 65536,
enabled
cap 01[48] = powerspec 3 supports D0 D3 current D0
cap 03[40] = VPD
cap 09[60] = vendor (length 108)
cap 05[50] = MSI supports 1 message, 64 bit
cap 10[cc] = PCI-Express 2 endpoint max data 128(256) link x1(x1)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
ecap 0002[13c] = VC 1 max VC0
ecap 0003[160] = Serial 1 d8d385fffeaf9f38
ecap 0004[16c] = unknown 1
More information about the freebsd-current
mailing list