new xorg segfault 11 with KMS
George Liaskos
geo.liaskos at gmail.com
Thu Dec 13 21:01:42 UTC 2012
Rebuilding xorg-server with gcc resolves the problem, bt points at libdrm2.
On Thu, Dec 13, 2012 at 10:51 PM, Artyom Mirgorodskiy <
artyom at ijminteractive.net> wrote:
> I have a similar problem when running firefox
>
> On Thursday 13 December 2012 15:49:38 Johannes Dieterich wrote:
> > Dear all,
> >
> > I lately see xorg segfault 11s with CURRENT, WITH_NEW_XORG=yes and
> > WITH_KMS=yes. Interestingly, gdm loads fine but xfce4 at login directly
> > causes the segfault (log attached), gnome survives a bit longer but
> > starting any bigger application (e.g. firefox) causes it to crash with
> the
> > same log.
> >
> > I have a Xorg.core file, but since it is without debug symbols the
> > backtrace makes little sense to me.
> >
> > Unfortunately, I cannot tell what is the root cause of the problems as I
> > first got bitten by the pcre update and also did the world update to the
> > clang3.2 import. Needless to say that everything worked prior and the
> > configuration (no xorg.conf here) did not change.
> >
> > uname -a:
> > FreeBSD XXXXX 10.0-CURRENT FreeBSD 10.0-CURRENT #6 r244180: Thu Dec 13
> > 09:46:06 EST 2012 root at XXXXX:/usr/obj/usr/src/sys/GENERIC amd64.
> >
> > Xorg.0.log:
> > [ 88.021]
> > X.Org X Server 1.10.6
> > Release Date: 2012-02-10
> > [ 88.021] X Protocol Version 11, Revision 0
> > [ 88.021] Build Operating System: FreeBSD 10.0-CURRENT amd64
> > [ 88.021] Current Operating System: FreeBSD XXXXXXXXX 10.0-CURRENT
> > FreeBSD 10.0-CURRENT #6 r244180: Thu Dec 13 09:46:06 EST 2012
> > root at XXXXXXX:/usr/obj/usr/src/sys/GENERIC amd64
> > [ 88.021] Build Date: 13 December 2012 06:30:07AM
> > [ 88.021]
> > [ 88.021] Current version of pixman: 0.24.2
> > [ 88.021] Before reporting problems, check http://wiki.x.org
> > to make sure that you have the latest version.
> > [ 88.021] Markers: (--) probed, (**) from config file, (==) default
> > setting,
> > (++) from command line, (!!) notice, (II) informational,
> > (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> > [ 88.022] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 13
> > 15:01:42 2012
> > [ 88.024] (II) Loader magic: 0x7c1930
> > [ 88.024] (II) Module ABI versions:
> > [ 88.024] X.Org ANSI C Emulation: 0.4
> > [ 88.024] X.Org Video Driver: 10.0
> > [ 88.024] X.Org XInput driver : 12.2
> > [ 88.024] X.Org Server Extension : 5.0
> > [ 88.025] (--) PCI:*(0:0:2:0) 8086:0166:17aa:2200 rev 9, Mem @
> > 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64, BIOS @
> > 0x????????/65536
> > [ 88.025] (==) Using default built-in configuration (30 lines)
> > [ 88.025] (==) --- Start of built-in configuration ---
> > [ 88.025] Section "Device"
> > [ 88.025] Identifier "Builtin Default intel Device 0"
> > [ 88.025] Driver "intel"
> > [ 88.025] EndSection
> > [ 88.025] Section "Screen"
> > [ 88.025] Identifier "Builtin Default intel Screen 0"
> > [ 88.025] Device "Builtin Default intel Device 0"
> > [ 88.025] EndSection
> > [ 88.025] Section "Device"
> > [ 88.025] Identifier "Builtin Default vesa Device 0"
> > [ 88.025] Driver "vesa"
> > [ 88.025] EndSection
> > [ 88.025] Section "Screen"
> > [ 88.025] Identifier "Builtin Default vesa Screen 0"
> > [ 88.025] Device "Builtin Default vesa Device 0"
> > [ 88.025] EndSection
> > [ 88.025] Section "Device"
> > [ 88.025] Identifier "Builtin Default fbdev Device 0"
> > [ 88.025] Driver "fbdev"
> > [ 88.025] EndSection
> > [ 88.025] Section "Screen"
> > [ 88.025] Identifier "Builtin Default fbdev Screen 0"
> > [ 88.025] Device "Builtin Default fbdev Device 0"
> > [ 88.026] EndSection
> > [ 88.026] Section "ServerLayout"
> > [ 88.026] Identifier "Builtin Default Layout"
> > [ 88.026] Screen "Builtin Default intel Screen 0"
> > [ 88.026] Screen "Builtin Default vesa Screen 0"
> > [ 88.026] Screen "Builtin Default fbdev Screen 0"
> > [ 88.026] EndSection
> > [ 88.026] (==) --- End of built-in configuration ---
> > [ 88.026] (==) ServerLayout "Builtin Default Layout"
> > [ 88.026] (**) |-->Screen "Builtin Default intel Screen 0" (0)
> > [ 88.026] (**) | |-->Monitor "<default monitor>"
> > [ 88.026] (**) | |-->Device "Builtin Default intel Device 0"
> > [ 88.026] (==) No monitor specified for screen "Builtin Default intel
> > Screen 0".
> > Using a default monitor configuration.
> > [ 88.026] (**) |-->Screen "Builtin Default vesa Screen 0" (1)
> > [ 88.026] (**) | |-->Monitor "<default monitor>"
> > [ 88.026] (**) | |-->Device "Builtin Default vesa Device 0"
> > [ 88.026] (==) No monitor specified for screen "Builtin Default vesa
> > Screen 0".
> > Using a default monitor configuration.
> > [ 88.026] (**) |-->Screen "Builtin Default fbdev Screen 0" (2)
> > [ 88.027] (**) | |-->Monitor "<default monitor>"
> > [ 88.027] (**) | |-->Device "Builtin Default fbdev Device 0"
> > [ 88.027] (==) No monitor specified for screen "Builtin Default fbdev
> > Screen 0".
> > Using a default monitor configuration.
> > [ 88.027] (==) Automatically adding devices
> > [ 88.027] (==) Automatically enabling devices
> > [ 88.027] (WW) The directory "/usr/local/lib/X11/fonts/misc/" does not
> > exist.
> > [ 88.027] Entry deleted from font path.
> > [ 88.028] (WW) The directory "/usr/local/lib/X11/fonts/Type1/" does
> not
> > exist.
> > [ 88.029] Entry deleted from font path.
> > [ 88.029] (WW) The directory "/usr/local/lib/X11/fonts/100dpi/" does
> not
> > exist.
> > [ 88.029] Entry deleted from font path.
> > [ 88.029] (WW) The directory "/usr/local/lib/X11/fonts/75dpi/" does
> not
> > exist.
> > [ 88.029] Entry deleted from font path.
> > [ 88.029] (==) FontPath set to:
> > /usr/local/lib/X11/fonts/TTF/,
> > /usr/local/lib/X11/fonts/OTF/
> > [ 88.029] (==) ModulePath set to "/usr/local/lib/xorg/modules"
> > [ 88.029] (II) The server relies on HAL to provide the list of input
> > devices.
> > If no devices become available, reconfigure HAL or disable
> > AutoAddDevices.
> > [ 88.029] (II) LoadModule: "extmod"
> > [ 88.032] (II) Loading
> > /usr/local/lib/xorg/modules/extensions/libextmod.so
> > [ 88.033] (II) Module extmod: vendor="X.Org Foundation"
> > [ 88.033] compiled for 1.10.6, module version = 1.0.0
> > [ 88.033] Module class: X.Org Server Extension
> > [ 88.033] ABI class: X.Org Server Extension, version 5.0
> > [ 88.033] (II) Loading extension MIT-SCREEN-SAVER
> > [ 88.033] (II) Loading extension XFree86-VidModeExtension
> > [ 88.033] (II) Loading extension XFree86-DGA
> > [ 88.033] (II) Loading extension DPMS
> > [ 88.034] (II) Loading extension XVideo
> > [ 88.034] (II) Loading extension XVideo-MotionCompensation
> > [ 88.034] (II) Loading extension X-Resource
> > [ 88.034] (II) LoadModule: "dbe"
> > [ 88.034] (II) Loading
> /usr/local/lib/xorg/modules/extensions/libdbe.so
> > [ 88.035] (II) Module dbe: vendor="X.Org Foundation"
> > [ 88.035] compiled for 1.10.6, module version = 1.0.0
> > [ 88.035] Module class: X.Org Server Extension
> > [ 88.035] ABI class: X.Org Server Extension, version 5.0
> > [ 88.035] (II) Loading extension DOUBLE-BUFFER
> > [ 88.035] (II) LoadModule: "glx"
> > [ 88.035] (II) Loading
> /usr/local/lib/xorg/modules/extensions/libglx.so
> > [ 88.040] (II) Module glx: vendor="X.Org Foundation"
> > [ 88.040] compiled for 1.10.6, module version = 1.0.0
> > [ 88.040] ABI class: X.Org Server Extension, version 5.0
> > [ 88.041] (==) AIGLX disabled
> > [ 88.041] (II) Loading extension GLX
> > [ 88.041] (II) LoadModule: "record"
> > [ 88.042] (II) Loading
> > /usr/local/lib/xorg/modules/extensions/librecord.so
> > [ 88.043] (II) Module record: vendor="X.Org Foundation"
> > [ 88.043] compiled for 1.10.6, module version = 1.13.0
> > [ 88.043] Module class: X.Org Server Extension
> > [ 88.043] ABI class: X.Org Server Extension, version 5.0
> > [ 88.043] (II) Loading extension RECORD
> > [ 88.043] (II) LoadModule: "dri"
> > [ 88.043] (II) Loading
> /usr/local/lib/xorg/modules/extensions/libdri.so
> > [ 88.045] (II) Module dri: vendor="X.Org Foundation"
> > [ 88.045] compiled for 1.10.6, module version = 1.0.0
> > [ 88.045] ABI class: X.Org Server Extension, version 5.0
> > [ 88.045] (II) Loading extension XFree86-DRI
> > [ 88.046] (II) LoadModule: "dri2"
> > [ 88.046] (II) Loading
> /usr/local/lib/xorg/modules/extensions/libdri2.so
> > [ 88.047] (II) Module dri2: vendor="X.Org Foundation"
> > [ 88.047] compiled for 1.10.6, module version = 1.2.0
> > [ 88.047] ABI class: X.Org Server Extension, version 5.0
> > [ 88.047] (II) Loading extension DRI2
> > [ 88.047] (II) LoadModule: "intel"
> > [ 88.047] (II) Loading
> /usr/local/lib/xorg/modules/drivers/intel_drv.so
> > [ 88.053] (II) Module intel: vendor="X.Org Foundation"
> > [ 88.053] compiled for 1.10.6, module version = 2.17.0
> > [ 88.053] Module class: X.Org Video Driver
> > [ 88.053] ABI class: X.Org Video Driver, version 10.0
> > [ 88.053] (II) LoadModule: "vesa"
> > [ 88.053] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
> > [ 88.054] (II) Module vesa: vendor="X.Org Foundation"
> > [ 88.054] compiled for 1.10.6, module version = 2.3.0
> > [ 88.054] Module class: X.Org Video Driver
> > [ 88.054] ABI class: X.Org Video Driver, version 10.0
> > [ 88.054] (II) LoadModule: "fbdev"
> > [ 88.057] (WW) Warning, couldn't open module fbdev
> > [ 88.057] (II) UnloadModule: "fbdev"
> > [ 88.057] (II) Unloading fbdev
> > [ 88.057] (EE) Failed to load module "fbdev" (module does not exist,
> 0)
> > [ 88.057] (II) intel: Driver for Intel Integrated Graphics Chipsets:
> > i810,
> > i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
> 915G,
> > E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview
> G,
> > 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
> > 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
> > Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
> > Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
> > Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
> > Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile
> (GT2),
> > Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge
> Server
> > [ 88.060] (II) VESA: driver for VESA chipsets: vesa
> > [ 88.060] (--) Using syscons driver with X support (version 2.0)
> > [ 88.060] (--) using VT number 9
> >
> > [ 88.062] (II) Loading
> /usr/local/lib/xorg/modules/drivers/intel_drv.so
> > [ 88.062] (WW) Falling back to old probe method for vesa
> > [ 88.062] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card
> > support
> > [ 88.062] drmOpenDevice: node name is /dev/dri/card0
> > [ 88.062] Failed to change owner or group for file /dev/dri! 2: No
> such
> > file or directory
> > [ 88.062] Failed to change owner or group for file /dev/dri/card0! 2:
> No
> > such file or directory
> > [ 88.062] drmOpenDevice: open result is -1, (No such file or
> directory)
> > [ 88.062] Failed to change owner or group for file /dev/dri/card0! 2:
> No
> > such file or directory
> > [ 88.062] drmOpenDevice: open result is -1, (No such file or
> directory)
> > [ 88.062] drmOpenDevice: Open failed
> > [ 89.135] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> > [ 89.135] drmOpenDevice: node name is /dev/dri/card0
> > [ 89.135] drmOpenDevice: open result is 8, (OK)
> > [ 89.135] drmOpenByBusid: drmOpenMinor returns 8
> > [ 89.135] drmOpenByBusid: Interface 1.4 failed, trying 1.1
> > [ 89.135] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> > [ 89.135] (II) intel(0): Creating default Display subsection in Screen
> > section
> > "Builtin Default intel Screen 0" for depth/fbbpp 24/32
> > [ 89.135] (==) intel(0): Depth 24, (--) framebuffer bpp 32
> > [ 89.135] (==) intel(0): RGB weight 888
> > [ 89.135] (==) intel(0): Default visual is TrueColor
> > [ 89.135] (II) intel(0): Integrated Graphics Chipset: Intel(R)
> Ivybridge
> > Mobile (GT2)
> > [ 89.135] (--) intel(0): Chipset: "Ivybridge Mobile (GT2)"
> > [ 89.135] (**) intel(0): Relaxed fencing enabled
> > [ 89.135] (**) intel(0): Wait on SwapBuffers? enabled
> > [ 89.135] (**) intel(0): Triple buffering? enabled
> > [ 89.135] (**) intel(0): Framebuffer tiled
> > [ 89.135] (**) intel(0): Pixmaps tiled
> > [ 89.135] (**) intel(0): 3D buffers tiled
> > [ 89.135] (**) intel(0): SwapBuffers wait enabled
> > [ 89.136] (==) intel(0): video overlay key set to 0x101fe
> > [ 89.136] (II) intel(0): Output LVDS1 has no monitor section
> > [ 89.136] (II) intel(0): Output VGA1 has no monitor section
> > [ 89.350] (II) intel(0): Output HDMI1 has no monitor section
> > [ 89.368] (II) intel(0): Output DP1 has no monitor section
> > [ 89.378] (II) intel(0): Output HDMI2 has no monitor section
> > [ 89.387] (II) intel(0): Output HDMI3 has no monitor section
> > [ 89.405] (II) intel(0): Output DP2 has no monitor section
> > [ 89.423] (II) intel(0): Output DP3 has no monitor section
> > [ 89.423] (II) intel(0): EDID for output LVDS1
> > [ 89.423] (II) intel(0): Manufacturer: SEC Model: 324c Serial#: 0
> > [ 89.423] (II) intel(0): Year: 2010 Week: 0
> > [ 89.423] (II) intel(0): EDID Version: 1.3
> > [ 89.423] (II) intel(0): Digital Display Input
> > [ 89.423] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
> > [ 89.423] (II) intel(0): Gamma: 2.20
> > [ 89.424] (II) intel(0): DPMS capabilities: StandBy Suspend Off
> > [ 89.424] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb
> > 4:4:4
> > [ 89.424] (II) intel(0): First detailed timing is preferred mode
> > [ 89.424] (II) intel(0): redX: 0.566 redY: 0.337 greenX: 0.351
> greenY:
> > 0.560
> > [ 89.424] (II) intel(0): blueX: 0.150 blueY: 0.094 whiteX: 0.313
> > whiteY: 0.329
> > [ 89.424] (II) intel(0): Manufacturer's mask: 0
> > [ 89.424] (II) intel(0): Supported detailed timing:
> > [ 89.424] (II) intel(0): clock: 98.2 MHz Image Size: 310 x 174 mm
> > [ 89.424] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680
> > h_blank_end 1760 h_border: 0
> > [ 89.424] (II) intel(0): v_active: 900 v_sync: 902 v_sync_end 907
> > v_blanking: 930 v_border: 0
> > [ 89.424] (II) intel(0): Unknown vendor-specific block f
> > [ 89.424] (II) intel(0): SAMSUNG
> > [ 89.424] (II) intel(0): LTN140KT03401
> > [ 89.424] (II) intel(0): EDID (in hex):
> > [ 89.424] (II) intel(0): 00ffffffffffff004ca34c3200000000
> > [ 89.424] (II) intel(0): 00140103801f1178ea1d859156598f26
> > [ 89.424] (II) intel(0): 18505400000001010101010101010101
> > [ 89.424] (II) intel(0): 0101010101015d2640a060841e303020
> > [ 89.424] (II) intel(0): 250036ae100000190000000f00000000
> > [ 89.425] (II) intel(0): 000000000032c8043200000000fe0053
> > [ 89.425] (II) intel(0): 414d53554e470a204ca34b54000000fe
> > [ 89.425] (II) intel(0): 004c544e3134304b54303334303100ca
> > [ 89.425] (II) intel(0): EDID vendor "SEC", prod id 12876
> > [ 89.425] (II) intel(0): Printing DDC gathered Modelines:
> > [ 89.425] (II) intel(0): Modeline "1600x900"x0.0 98.21 1600 1648
> 1680
> > 1760 900 902 907 930 -hsync -vsync (55.8 kHz)
> > [ 89.425] (II) intel(0): Not using default mode "320x240" (doublescan
> > mode not supported)
> > [ 89.425] (II) intel(0): Not using default mode "400x300" (doublescan
> > mode not supported)
> > [ 89.425] (II) intel(0): Not using default mode "400x300" (doublescan
> > mode not supported)
> > [ 89.425] (II) intel(0): Not using default mode "512x384" (doublescan
> > mode not supported)
> > [ 89.425] (II) intel(0): Not using default mode "640x480" (doublescan
> > mode not supported)
> > [ 89.425] (II) intel(0): Not using default mode "640x512" (doublescan
> > mode not supported)
> > [ 89.425] (II) intel(0): Not using default mode "800x600" (doublescan
> > mode not supported)
> > [ 89.425] (II) intel(0): Not using default mode "896x672" (doublescan
> > mode not supported)
> > [ 89.425] (II) intel(0): Not using default mode "928x696" (doublescan
> > mode not supported)
> > [ 89.425] (II) intel(0): Not using default mode "960x720" (doublescan
> > mode not supported)
> > [ 89.425] (II) intel(0): Not using default mode "700x525" (doublescan
> > mode not supported)
> > [ 89.425] (II) intel(0): Not using default mode "1024x768" (doublescan
> > mode not supported)
> > [ 89.425] (II) intel(0): Printing probed modes for output LVDS1
> > [ 89.425] (II) intel(0): Modeline "1600x900"x60.0 98.21 1600 1648
> > 1680 1760 900 902 907 930 -hsync -vsync (55.8 kHz)
> > [ 89.425] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048
> > 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
> > [ 89.426] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968
> > 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
> > [ 89.426] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896
> > 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
> > [ 89.426] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752
> > 800 480 490 492 525 -hsync -vsync (31.5 kHz)
> > [ 89.426] (II) intel(0): EDID for output VGA1
> > [ 89.632] (II) intel(0): EDID for output HDMI1
> > [ 89.650] (II) intel(0): EDID for output DP1
> > [ 89.660] (II) intel(0): EDID for output HDMI2
> > [ 89.669] (II) intel(0): EDID for output HDMI3
> > [ 89.687] (II) intel(0): EDID for output DP2
> > [ 89.705] (II) intel(0): EDID for output DP3
> > [ 89.705] (II) intel(0): Output LVDS1 connected
> > [ 89.705] (II) intel(0): Output VGA1 disconnected
> > [ 89.705] (II) intel(0): Output HDMI1 disconnected
> > [ 89.705] (II) intel(0): Output DP1 disconnected
> > [ 89.705] (II) intel(0): Output HDMI2 disconnected
> > [ 89.705] (II) intel(0): Output HDMI3 disconnected
> > [ 89.705] (II) intel(0): Output DP2 disconnected
> > [ 89.705] (II) intel(0): Output DP3 disconnected
> > [ 89.705] (II) intel(0): Using exact sizes for initial modes
> > [ 89.705] (II) intel(0): Output LVDS1 using initial mode 1600x900
> > [ 89.706] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless
> > otherwise stated.
> > [ 89.706] (II) intel(0): Kernel page flipping support detected,
> enabling
> > [ 89.706] (**) intel(0): Display dimensions: (310, 170) mm
> > [ 89.706] (**) intel(0): DPI set to (131, 134)
> > [ 89.706] (II) Loading sub module "fb"
> > [ 89.706] (II) LoadModule: "fb"
> > [ 89.707] (II) Loading /usr/local/lib/xorg/modules/libfb.so
> > [ 89.709] (II) Module fb: vendor="X.Org Foundation"
> > [ 89.709] compiled for 1.10.6, module version = 1.0.0
> > [ 89.709] ABI class: X.Org ANSI C Emulation, version 0.4
> > [ 89.709] (II) Loading sub module "dri2"
> > [ 89.709] (II) LoadModule: "dri2"
> > [ 89.709] (II) Loading
> /usr/local/lib/xorg/modules/extensions/libdri2.so
> > [ 89.710] (II) Module dri2: vendor="X.Org Foundation"
> > [ 89.710] compiled for 1.10.6, module version = 1.2.0
> > [ 89.710] ABI class: X.Org Server Extension, version 5.0
> > [ 89.710] (II) UnloadModule: "vesa"
> > [ 89.710] (II) Unloading vesa
> > [ 89.710] (==) Depth 24 pixmap format is 32 bpp
> > [ 89.710] (II) intel(0): [DRI2] Setup complete
> > [ 89.710] (II) intel(0): [DRI2] DRI driver: i965
> > [ 89.710] (II) intel(0): Allocated new frame buffer 1600x900 stride
> > 6656, tiled
> > [ 89.716] (II) UXA(0): Driver registered support for the following
> > operations:
> > [ 89.716] (II) solid
> > [ 89.716] (II) copy
> > [ 89.716] (II) composite (RENDER acceleration)
> > [ 89.716] (II) put_image
> > [ 89.716] (II) get_image
> > [ 89.716] (==) intel(0): Backing store disabled
> > [ 89.716] (==) intel(0): Silken mouse enabled
> > [ 89.716] (II) intel(0): Initializing HW Cursor
> > [ 89.873] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
> > disabled message.
> > [ 89.873] (==) intel(0): DPMS enabled
> > [ 89.873] (==) intel(0): Intel XvMC decoder enabled
> > [ 89.873] (II) intel(0): Set up textured video
> > [ 89.874] (II) intel(0): [XvMC] xvmc_vld driver initialized.
> > [ 89.874] (II) intel(0): direct rendering: DRI2 Enabled
> > [ 89.874] (--) RandR disabled
> > [ 89.874] (II) Initializing built-in extension Generic Event Extension
> > [ 89.874] (II) Initializing built-in extension SHAPE
> > [ 89.874] (II) Initializing built-in extension MIT-SHM
> > [ 89.874] (II) Initializing built-in extension XInputExtension
> > [ 89.874] (II) Initializing built-in extension XTEST
> > [ 89.874] (II) Initializing built-in extension BIG-REQUESTS
> > [ 89.874] (II) Initializing built-in extension SYNC
> > [ 89.874] (II) Initializing built-in extension XKEYBOARD
> > [ 89.874] (II) Initializing built-in extension XC-MISC
> > [ 89.874] (II) Initializing built-in extension XINERAMA
> > [ 89.874] (II) Initializing built-in extension XFIXES
> > [ 89.874] (II) Initializing built-in extension RENDER
> > [ 89.874] (II) Initializing built-in extension RANDR
> > [ 89.874] (II) Initializing built-in extension COMPOSITE
> > [ 89.874] (II) Initializing built-in extension DAMAGE
> > [ 89.912] (II) AIGLX: Loaded and initialized
> > /usr/local/lib/dri/swrast_dri.so
> > [ 89.912] (II) GLX: Initialized DRISWRAST GL provider for screen 0
> > [ 89.913] (II) intel(0): Setting screen physical size to 423 x 238
> > [ 92.986] (II) config/hal: Adding input device AT Keyboard
> > [ 92.987] (II) LoadModule: "kbd"
> > [ 92.987] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
> > [ 92.988] (II) Module kbd: vendor="X.Org Foundation"
> > [ 92.989] compiled for 1.10.6, module version = 1.6.1
> > [ 92.989] Module class: X.Org XInput Driver
> > [ 92.989] ABI class: X.Org XInput driver, version 12.2
> > [ 92.989] (II) Using input driver 'kbd' for 'AT Keyboard'
> > [ 92.989] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
> > [ 92.989] (**) AT Keyboard: always reports core events
> > [ 92.989] (**) AT Keyboard: always reports core events
> > [ 92.989] (**) Option "Protocol" "standard"
> > [ 92.989] (**) Option "XkbRules" "base"
> > [ 92.989] (**) Option "XkbModel" "pc105"
> > [ 92.989] (**) Option "XkbLayout" "us"
> > [ 92.989] (**) Option "config_info"
> > "hal:/org/freedesktop/Hal/devices/atkbd_0"
> > [ 92.989] (II) XINPUT: Adding extended input device "AT Keyboard"
> (type:
> > KEYBOARD)
> > [ 95.110] (II) config/hal: Adding input device PS/2 Mouse
> > [ 95.110] (II) LoadModule: "mouse"
> > [ 95.111] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
> > [ 95.112] (II) Module mouse: vendor="X.Org Foundation"
> > [ 95.112] compiled for 1.10.6, module version = 1.7.1
> > [ 95.112] Module class: X.Org XInput Driver
> > [ 95.112] ABI class: X.Org XInput driver, version 12.2
> > [ 95.112] (II) Using input driver 'mouse' for 'PS/2 Mouse'
> > [ 95.112] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
> > [ 95.112] (**) PS/2 Mouse: always reports core events
> > [ 95.112] (**) Option "Device" "/dev/psm0"
> > [ 95.112] (==) PS/2 Mouse: Protocol: "Auto"
> > [ 95.112] (**) PS/2 Mouse: always reports core events
> > [ 95.165] (==) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 50
> > [ 95.165] (**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
> > [ 95.165] (**) PS/2 Mouse: Buttons: 9
> > [ 95.165] (**) Option "config_info"
> > "hal:/org/freedesktop/Hal/devices/psm_0"
> > [ 95.165] (II) XINPUT: Adding extended input device "PS/2 Mouse"
> (type:
> > MOUSE)
> > [ 95.165] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
> > [ 95.165] (**) PS/2 Mouse: (accel) acceleration profile 0
> > [ 95.165] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
> > [ 95.165] (**) PS/2 Mouse: (accel) acceleration threshold: 4
> > [ 95.183] (II) PS/2 Mouse: SetupAuto: hw.iftype is 3, hw.model is 0
> > [ 95.183] (II) PS/2 Mouse: SetupAuto: protocol is PS/2
> > [ 95.340] (II) PS/2 Mouse: ps2EnableDataReporting: succeeded
> > [ 96.475] (II) intel(0): EDID vendor "SEC", prod id 12876
> > [ 96.475] (II) intel(0): Printing DDC gathered Modelines:
> > [ 96.475] (II) intel(0): Modeline "1600x900"x0.0 98.21 1600 1648
> 1680
> > 1760 900 902 907 930 -hsync -vsync (55.8 kHz)
> > [ 96.755] (II) intel(0): EDID vendor "SEC", prod id 12876
> > [ 96.755] (II) intel(0): Printing DDC gathered Modelines:
> > [ 96.755] (II) intel(0): Modeline "1600x900"x0.0 98.21 1600 1648
> 1680
> > 1760 900 902 907 930 -hsync -vsync (55.8 kHz)
> > [ 97.036] (II) intel(0): EDID vendor "SEC", prod id 12876
> > [ 97.036] (II) intel(0): Printing DDC gathered Modelines:
> > [ 97.036] (II) intel(0): Modeline "1600x900"x0.0 98.21 1600 1648
> 1680
> > 1760 900 902 907 930 -hsync -vsync (55.8 kHz)
> > [ 97.315] (II) intel(0): EDID vendor "SEC", prod id 12876
> > [ 97.315] (II) intel(0): Printing DDC gathered Modelines:
> > [ 97.315] (II) intel(0): Modeline "1600x900"x0.0 98.21 1600 1648
> 1680
> > 1760 900 902 907 930 -hsync -vsync (55.8 kHz)
> > [ 107.345] (II) intel(0): EDID vendor "SEC", prod id 12876
> > [ 107.345] (II) intel(0): Printing DDC gathered Modelines:
> > [ 107.345] (II) intel(0): Modeline "1600x900"x0.0 98.21 1600 1648
> 1680
> > 1760 900 902 907 930 -hsync -vsync (55.8 kHz)
> > [ 108.696] Segmentation fault at address 0x3fffffffed
> > [ 108.696]
> > Fatal server error:
> > [ 108.697] Caught signal 11 (Segmentation fault). Server aborting
> > [ 108.697]
> > [ 108.697]
> > Please consult the The X.Org Foundation support
> > at http://wiki.x.org
> > for help.
> > [ 108.697] Please also check the log file at "/var/log/Xorg.0.log" for
> > additional information.
> > [ 108.697]
> > [ 108.698] (II) UnloadModule: "kbd"
> > [ 108.698] (II) Unloading kbd
> > [ 108.733] (II) UnloadModule: "mouse"
> > [ 108.733] (II) Unloading mouse
> > [ 108.733] (WW) intel(0): drmDropMaster failed: Unknown error: -22
> >
> > Perhaps someone got an idea?
> >
> > Thanks a lot
> >
> > Johannes
> > _______________________________________________
> > freebsd-current at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-current
> > To unsubscribe, send any mail to "
> freebsd-current-unsubscribe at freebsd.org"
> --
> This message is for the person(s) named above only and may contain
> privileged, proprietary, or otherwise private information. If you received
> this transmission in error, please notify the sender immediately and delete
> the original. Any other use of the email by you is prohibited.
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
>
More information about the freebsd-current
mailing list