[CFR]RT305xF support, w/o attachment

[Aleksandr Rybalko]

Hi,

On Wed, 16 Mar 2011 18:06:59 +0100
Jan Henrik Sylvester <me at janh.de> wrote:

> Hello!
> 
> On 01/-10/-28163 20:59, Aleksandr Rybalko wrote:
> > 3. RT2860 802.11n controller authors Damien Bergamini and Alexander
> > Egorenkov http://my.ddteam.net/files/2011-03-14_rt2860.patch
> > 	only modification to work with RT2872 (embedded to RT305[02]
> > F) wrote by me.
> 
> Is this supposed to work on its own bringing support for Ralink 2860
> to FreeBSD? (The one in the Asus EeePC 901/1000H according to 
> http://wiki.freebsd.org/AsusEee .)
> 
> > Remaining issues:
> > 	RT2860 support only Open(no crypto) mode for RT305[02]F
> 
> Does this mean WPA should work for RT2860? (Just not for the chips
> you added support for?)

As I know this driver support WPA, but best place to read/ask about
this on this thread http://forums.freebsd.org/showthread.php?t=7010

> 
> If this is supposed to bring RT2860 support to FreeBSD in general:
> 
> - Should it work on amd64 and i386?
> - Should it work on 8.2-RELEASE?
> - Should it work as a module?
> 
> In case this is all supposed to work: I tried to create a module on 
> 8.2-RELEASE/amd64 by adding a simple sys/modules/rt2860/Makefile (as
> I did not want to modify my stock 8.2-RELEASE kernel). I only got to:
> 
> In file included from 
> /usr/src/sys/modules/rt2860/../../dev/rt2860/rt2860.c:19:
> @/dev/rt2860/rt2860_softc.h:52:24: error: opt_rt2860.h: No such file
> or directory
> 
> I do not find opt_rt2860.h anywhere in your patches. Assuming it was 
> optional, I have commented it out only to get to:
> 
> cc1: warnings being treated as errors
> /usr/src/sys/modules/rt2860/../../dev/rt2860/rt2860_pci.c:63:
> warning: 'rt2860_pci_detach' declared 'static' but never defined
> 
> Probably, I am doing something unsupported here (especially as there
> is no if_rt2860_pci.c, which I would expect).

No, it's me. Too much data, so I a little confused here.
Patch targeting to start support RT3052F/RT3050F System on Chip.
Which main part for embedded systems like routers, AP etc.

To get it compiled need remove 'rt2860_pci_detach' declaration,
because pci and obio interfaces have same detach device methods
(rt2860_detach in rt2860.c)

And opt_rt2860.h must be defined in sys/conf/options
<code>
# options for the Ralink RT286x driver (rt2860)
RT2860_DEBUG            opt_rt2860.h
</code>

> 
> Cheers,
> Jan Henrik

I will remake patch tomorrow.

Thanks for your report and questions?

-- 
Aleksandr Rybalko <ray at ddteam.net>