NEW_PCIB? pcib1: failed to allocate initial I/O port window: 0x4000-0x4fff

[John Baldwin]

On Wednesday, June 08, 2011 12:13:05 am John wrote:
> ----- John Baldwin's Original Message -----
> > On Monday, June 06, 2011 9:33:30 pm John wrote:
> > > ----- John Baldwin's Original Message -----
> > > > On Sunday, June 05, 2011 8:23:53 pm John wrote:
> > > > > 
> > > > >    I just attempted to update an HP385G0 system from current as of
> > > > > 4-15-2011 to 6-2-2011. The new system will not boot, and shows the
> > > > > following message when it hangs:
> > > 
> > >    I applied your patch/rebuilt/installed/rebooted. The system seems
> > > to get farther, but still locks up tight. A screen pic is here:
> > > 
> > > http://people.freebsd.org/~jwd/dmesg.jpg
> > > 
> > 
> > Hmmm, an MCA is not a good sign.
> > 
> > Yes, there are multiple ranges.  Would it be possible to use a serial port to 
> > capture a full verbose dmesg up to the point where it hangs?
> > 
> > -- 
> > John Baldwin
> 
> Hi John
> 
>    Yes, I did get a serial console & ilo configured on the system today.
> I've attached two verbose consoles. The 1st is from -current as of today
> which fails to boot. The 2nd is from earlier this year which boot correctly.

Humm, is the first with any patches applied?  Earlier you reported a problem
that occured much later (failing to allocate the initial window) but in
your new dmesg it isn't getting that far.

-- 
John Baldwin