Switch from legacy ata(4) to CAM-based ATA
Anton Yuzhaninov
citrin at citrin.ru
Mon Apr 25 12:28:57 UTC 2011
On Wed, 20 Apr 2011 12:57:47 +0300, Alexander Motin wrote:
AM> If somebody has any problems with new ATA stack, please repeat your
AM> tests with latest HEAD code and contact me if problem is still there.
AM> Next three weeks before BSDCan I am going to dedicate to fixing possibly
AM> remaining issues.
On motherboard MSI MS-7210 no HDD detected with new GENERIC (r221012).
In dmesg I see line like:
device_attach: ahci0 attach returned 6
(I have no serial console cable and can't capture full dmesg).
>From pciconf -vlbc (when I boot with old ata)
atapci1 at pci0:0:31:2: class=0x01018f card=0x72101462 chip=0x27c08086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801GB/GR/GH (ICH7 Family) Serial ATA Storage
Controller'
class = mass storage
subclass = ATA
bar [10] = type I/O Port, range 32, base 0xe880, size 8, enabled
bar [14] = type I/O Port, range 32, base 0xe800, size 4, enabled
bar [18] = type I/O Port, range 32, base 0xe480, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0xe400, size 4, enabled
bar [20] = type I/O Port, range 32, base 0xe080, size 16, enabled
cap 01[70] = powerspec 2 supports D0 D3 current D0
--
WBR,
Anton Yuzhaninov
More information about the freebsd-current
mailing list