igb broken? Unexplained weirdness with intel 82576 nics on a
supermicro board.
joe
joe at hostedcontent.com
Sat May 8 17:41:45 UTC 2010
On 05/08/2010 01:31 PM, Jack Vogel wrote:
> Looks like something to do with system C, you might isolate it, and try
> a back
> to back connection with its NICs, change cables, look at BIOS settings,
> change
> the slot the nic is in... All just off the top of my head.
>
> Jack
>
>
> On Sat, May 8, 2010 at 9:41 AM, joe <joe at hostedcontent.com
> <mailto:joe at hostedcontent.com>> wrote:
>
> On 05/08/2010 11:17 AM, Ian FREISLICH wrote:
>
> joe wrote:
>
> On 05/08/2010 06:55 AM, Ian FREISLICH wrote:
>
> joe wrote:
>
> I have just tried your suggeston and it has
> no effect for me ;(
>
>
> Do you have another brand of NIC that you can try? At
> least that
> will isolate whether it's igb(4) or something else.
>
>
> I will grab a new nic today and try...my options are limited
> though.
> Here are the nics i can get my hands on
>
> TP-LINK TL-TG3468, 10/100/1000Mbps PCIe Adapter (supported
> by fbsd?)
>
>
> Based on the RTL8168B chip. Should be supported by the re(4)
> driver.
>
> Intel (EXPI9301CT) Gigabit CT Desktop Adapter (yet another
> intel nic)
>
>
> i82574L chip. Should be supported by the em(4) driver. I have had
> good performance in the past with this driver and less than
> satisfactory performance with the igb(4) driver.
>
> That may not be your problem though. Before you go out and buy,
> have a look at the amount of interrupt time your slow machine spends
> in 'top' or 'systat -vm'. systat will also show the interrupt rate
> for each driver, perhaps it's not doing interrupt moderation
> properly.
> This will manifest as more than about a 1000 per second. There are
> loader tunables for the driver to increase the number of transfer
> descriptors and to tune interrupt moderation.
>
> You could try running trafshow (port) on the interface while
> performing the transfer. Perhaps promiscuous mode will turn off
> some hardware feature that will improve things. It may however
> break hardware vlanning as it does on my 82575GB 4 port igb card.
>
> Ian
>
> --
> Ian Freislich
>
>
> I bought those two cards anyways, im in a rush to figure out this
> problem. That being said i am still encountering the exact same
> problem regardless on which network card i am running. I am at a
> complete loss. I am about to try a raid card to see if the problem
> might lay within the onboard sata ports. I did pull the server and
> brought it home so that i can test more things quicker.
>
> I am going to try using a raid card instead of the onboard sata
> ports and see if i still encounter the same problem. I would love
> any suggestions you may have on where to go from here to figure out
> where the problem might be.
>
> joe
>
> _______________________________________________
> freebsd-current at freebsd.org <mailto:freebsd-current at freebsd.org>
> mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to
> "freebsd-current-unsubscribe at freebsd.org
> <mailto:freebsd-current-unsubscribe at freebsd.org>"
>
>
I think it might have something to so with the nics / switch, and their
features. I brought the box home, plugged into my gb switch, and i am
able to FTP data to the server at around 35MB/sec.
I dont know what would cause this other than some sort of issue with the
the 3 different types of nics and the switch i am using.
Any suggestions?
More information about the freebsd-current
mailing list